5-MTHF vs folic acid: the active folate and the salt
Folic acid (CAS 59-30-3, C₁₉H₁₉N₇O₆, 441.40 g/mol) and 5-MTHF (the calcium salt here, CAS 151533-22-1, 497.52 g/mol) are different molecules. Folic acid is the fully oxidised pteroylmonoglutamic acid; 5-MTHF is the reduced 5-methyl form, supplied as a calcium salt. The difference changes the folate mass per milligram, the ingredient name on the label and the stability of the powder.
Folic acid and 5-MTHF are different molecules with different masses and different label names, so a dose cannot be moved from one to the other without the arithmetic and the market file.
Two folate molecules, not two strengths
Folic acid is the synthetic, fully oxidised form of the vitamin. Its pteridine ring is aromatic and its glutamate tail is free; it carries no methyl group and no calcium. 5-MTHF is the reduced form with a methyl group at N5 and a hydrogen at C6, which gives it a chiral centre. In the commercial calcium salt, one calcium ion balances the molecule, and the anhydrous mass rises to 497.52 g/mol.
The two are related in the body: folic acid is reduced and methylated before it joins the folate pool, and 5-MTHF is the main circulating form. That relationship is a reason to keep the names apart on a label, not a reason to use the powders interchangeably in a formulation. One is an acid, the other is a calcium salt with a different mass, solubility and stability profile.
| Property | Folic acid | 5-MTHF calcium salt |
|---|---|---|
| CAS number | 59-30-3 | 151533-22-1 |
| Formula | C₁₉H₁₉N₇O₆ | C₂₀H₂₃CaN₇O₆·xH₂O |
| Molecular weight | 441.40 | 497.52 (anhydrous) |
| Chemical state | Fully oxidised | Reduced, 5-methyl |
| Counter-ion | None | Calcium, 1:1 |
| Appearance | Yellow to orange crystalline powder | White to off-white powder |
| Water solubility | Slightly soluble; soluble in dilute alkali | Soluble; neutral to slightly alkaline solution |
The folate fraction changes the weigh-out
The 5-MTHF acid has a molecular weight of 459.46; the anhydrous calcium salt is 497.52. The folate fraction of the salt is therefore 459.46 ÷ 497.52 = 0.9235, so one milligram of the salt carries about 0.924 mg of 5-MTHF acid. Folic acid does not have this step: one milligram of folic acid is one milligram of the acid, which is why a folic acid assay percentage and a 5-MTHF assay percentage have different denominators.
The arithmetic is easy to get wrong. A 99.0% assay on the calcium salt carries about 91.4% folate as the acid (0.990 × 0.9235), not 99.0%. A label claim of 400 µg of folate as 5-MTHF acid needs 400 ÷ 0.9235 = 433 µg of the salt at 100% assay, about 442 µg at 98% assay, and about 460 µg if the powder also carries 4% water and the assay is anhydrous. The same 400 µg claim from folic acid needs 400 µg of the acid, subject to its assay correction.
At a microgram dose the extra mass is small in absolute terms, but it is not zero in a blend: it changes the fill weight, the amount of excipient and the uniformity calculation. Build the weigh-out from the salt factor, the assay basis and the water, and say in the finished-product specification which form the number refers to.
What the label has to declare
In the EU, the ingredient list names the salt and the nutrition declaration gives folate in micrograms, with the EU nutrient reference value of 200 µg used for the percentage. The percentage is calculated from the folate in the serving, so the salt has to be converted to folate mass first. The permitted-source rules are form-specific; the buyer's regulatory team confirms the entry for the destination and the current consolidated text, as of this review.
On a US label, the Supplement Facts panel gives folate in dietary folate equivalents against a Daily Value of 400 mcg DFE for adults and children aged four years and older. The ingredient list still names the salt, and the DFE factor is set by the labelling rule rather than by the molecular weight alone. A factor written for folic acid does not carry over to a methylfolate salt; the label review settles the arithmetic.
Two label points follow. The upper intake level usually quoted for folate, 1,000 µg/day, is expressed for folic acid, so it is not a 5-MTHF number carried across by mass. “Methylfolate” alone is not a complete ingredient name: the counter-ion belongs in it, and the calcium salt is a different label entry from the glucosamine salt.
Stability is not shared between the forms
Folic acid is the more robust of the two as a dry powder: it is crystalline, only slightly soluble in water, and tolerates dry storage and direct compression, though it is still light-sensitive. The reduced 5-MTHF is more reactive. It oxidises, it is degraded by light, and in solution it is sensitive to pH, with acid conditions the ones to avoid. The calcium salt and the sealed foil pouch exist to manage that reactivity, not to remove it.
A folic acid stability study does not cover a switch to 5-MTHF. The degradants and the assay method are different, and the loss curve in the same matrix can be steeper. If a formula moves from one to the other, the stability work, the overage and the storage statement all have to be rebuilt around the new material. The 5-MTHF stability page sets out the protocol.
What changes when the form changes
A switch is a new specification, not a substitution at the balance. It changes the ingredient name and the CAS number, the assay method and its validation, the weigh-out, the label declaration, the market file and the stability data. The HPLC method used for folic acid will not quantify the calcium salt without revalidation, and a method that does not resolve the two forms cannot prove which one is in the drum.
Fix the label form and the destination route first, then calculate the mass from the salt factor and the assay basis, then confirm the particle size and the grade, then run the stability study in the finished matrix. A project that picks the powder first and adjusts the label afterwards usually repeats the work. The folic acid side of the comparison is set out on the folic acid product page and its form comparison.
When each form is the right purchase
Folic acid is the right purchase when the label and the market file name folic acid, when the dry blend wants a crystalline acid with a long storage history, and when the formulation has been built around it. 5-MTHF is the right purchase when the label declares the active folate, when the market file covers the calcium salt, and when the formula and the stability data have been built around its mass and its reactivity. This is the form we supply.
Neither is a drop-in for the other; the choice is not a preference between two names for the same vitamin. Catalog values are on the 5-MTHF product page; the grades page sets this comparison among the other forms; the COA page shows how the salt is reported; the HPLC method note describes the separation; the quality page covers release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation