5-MTHF stability: light, oxygen and the pack
5-MTHF calcium salt is sensitive to light, oxygen and moisture, and heat accelerates all three. The sealed foil pouch is the stable format; an aqueous solution is the least stable and its pH matters. The retest period should come from data on the exact pack and matrix, not from the certificate.
5-MTHF is degraded by light and oxygen, and the pack and the pH of the matrix decide how much of the dose survives the retest period.
The dry powder and its two enemies
The catalog sets water at ≤5.0%. That limit is a release gate, not a storage allowance. Once the foil pouch is opened, the powder can pick up moisture from the air; the water figure rises, the as-is assay falls, and the powder may become less free-flowing. A tight seal and a dry store are part of the specification in practice, even when they are not printed on the certificate.
Light is the second driver. The folate ring is photolabile, and a clear container on a bench or a windowsill is an exposure. The powder should stay in its original light-resistant pouch or in an opaque container that closes properly. A glass jar on a shelf is not a storage container for this material, however tidy it looks.
Heat raises the rate of both moisture and light damage. A normal warehouse temperature is usually acceptable for the sealed pack; a hot loading bay, a car boot or a greenhouse is not. After cold storage, let the sealed pack equilibrate to room temperature before opening it, so that condensation does not form on the powder.
The solution: pH, oxygen and hold time
The calcium salt dissolves in water to give a solution that is neutral to slightly alkaline; the catalog pH is 6.0–8.0 at 1%. In solution, light, oxygen, heat and pH act at the same time. Acid conditions are the ones to avoid: the 5-methyl folate is least stable when the matrix pushes the pH down, and a fruit-flavoured drink is exactly that kind of matrix unless it is buffered or the hold is short.
A ready-to-drink process adds a heat load through pasteurisation or hot fill; a powder stick avoids that step because the consumer adds water at the point of use. If a liquid is unavoidable, shield it from light, hold the pH in range, keep oxygen low, and prove the hold time before filling. Bulk-powder data does not transfer to a beverage. The matrix, the process and the pack all alter the rate, so the drink has to carry its own shelf-life data.
What moves the material during storage
| Factor | Effect on the material | What keeps it in check |
|---|---|---|
| Light | Fades the colour and lowers the assay | Foil or opaque pack; dark store |
| Oxygen | Oxidises the reduced folate | Small headspace; sealed pack |
| Moisture | Raises water and dilutes the as-is assay | Sealed pouch; desiccant if needed |
| Heat | Speeds up oxidation and moisture pickup | Cool, controlled store |
| pH | Acid matrices destabilise the solution | Buffer the matrix; limit the hold |
| Metal ions | Promote oxidation in solution | No iron or copper contact |
The factors act together rather than one at a time. A warm, bright, humid store compounds all three, and a clear bottle of an acidic drink compounds them again. The useful stability question is not “is 5-MTHF stable?” but “stable in which pack, at which pH, for how long?”
Designing the stability study
A useful protocol fixes four things: the pack, the condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm covers the failure mode that a dark incubator misses, and it should be run in the same pack that will be sold.
Test assay, water, pH, appearance, the isomer ratio, related substances and microbiology at each point. When the application is a beverage or a stick pack, repeat the work in the matrix at the process pH and heat load. The report should list each result rather than a single pass statement, and should name the pack and the lot family. A study run on a different pack from the same product family answers a different question.
The finished formula changes the question
A capsule or tablet keeps water activity low, though the shell and the excipients can still pass moisture. Check water at release and after storage, and check the appearance of the fill. For a stick pack, the seal and the foil are the critical points; a pinhole is a failure, so inspect the strip as well as the powder. A gummy combines water activity, process heat and a matrix that can hold the folate in solution; it needs its own study.
A beverage combines light, pH, heat and oxygen. Bulk stability is where the work begins, not where it ends. Whether an overage is needed is a label and stability decision for the formulator, and it does not repair a pack that lets moisture in or a matrix at the wrong pH.
How the retest period is assigned
We do not publish a single shelf-life number for 5-MTHF; the pack and its storage history decide it. The retest period belongs on the specification and rests on the stability data for that pack. A figure quoted without a pack, a condition and a test panel is a promise, not a shelf life.
After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not apply a bulk figure to a repacked container. The product hub lists the standard packs; release tests are on the COA page; pack and lead time on the MOQ page; the HPLC note describes the assay; the quality page describes the release workflow.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation