Minerals & Electrolytes · Core range
Magnesium Bisglycinate
Mg(C₂H₄NO₂)₂ · CAS 14783-68-7 · 1:2 magnesium–glycine chelate, anhydrous basis
A 1:2 magnesium–glycine chelate specified at 13.5–14.2% elemental magnesium, for capsules, tablets and powder blends where the form named on the label has to match the form in the drum.
- Magnesium (Mg)
- 13.5–14.2%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Magnesium (Mg) | 13.5–14.2% (complexometric EDTA) |
|---|---|
| Glycine | 84.0–88.0% (HPLC) |
| Mg : glycine ratio | 1 : 2 molar (calculated) |
| Free glycine | ≤1.0% (HPLC) |
| Appearance | White to off-white crystalline powder |
| pH (5% suspension) | 8.5–11.5 |
| Loss on drying | ≤8.0% |
| Particle size | ≥95% through 40 mesh |
| Bulk density | 0.55–0.90 g/mL |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | Mg(C₂H₄NO₂)₂ |
| CAS | 14783-68-7 |
| Marker set | Magnesium (13.5–14.2%), glycine (84.0–88.0%), Mg : glycine 1:2 |
| Appearance | White to off-white, free-flowing crystalline powder |
| Solubility | Soluble in water; the 5% suspension is alkaline (pH 8.5–11.5). Dissolution rate depends on particle size. |
Primary method Complexometric EDTA titration and HPLC — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Magnesium Bisglycinate. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Name the hydrate. A 14% grade, a monohydrate and a dihydrate all get sold as magnesium glycinate, and the elemental magnesium differs.
- Ask whether the material is fully reacted. A blend with magnesium oxide can still pass a magnesium assay.
- Read the Mg : glycine ratio and free glycine together; either figure alone can be met by adding glycine.
- Particle size and bulk density decide capsule fill weight and tablet flow. Ask for both, not for a mesh range alone.
Buyer questions
Practical answers
What is Magnesium Bisglycinate specified to?
Magnesium (Mg): 13.5–14.2% (complexometric EDTA). The full specification adds Glycine, Mg : glycine ratio, Free glycine, Appearance, pH (5% suspension) and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Is Magnesium Bisglycinate a chelate or a blend?
The catalog grade is a 1:2 magnesium–glycine chelate. Blends with the corresponding oxide or carbonate are a different material and are not supplied under this specification. The identity page explains how the distinction is tested.
Which dosage forms does this grade fit?
Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Magnesium Bisglycinate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.