04 MOQ & ordering

5-MTHF MOQ: 1 kg, packs and the first order

Technical document 04 · Reviewed 2026-11-19 · 5-MTHF

On this page
  1. Why one kilogram is the floor
  2. The pack options
  3. Lead time and the dispatch date
  4. What makes a quotation firm
  5. A sample has to be a lot
  6. What to settle before the first order

The MOQ for 5-MTHF is 1 kg, supplied in a foil pouch; the bulk pack is a 25 kg fiber drum, and the standard lead time is 1–7 days. A firm quotation needs the salt form, the assay basis, the isomer ratio, the quantity and pack, the destination and the intended use.

In one line

One kilogram is the minimum order, and because the dose is measured in micrograms that pack is large enough to cover the trial, the retained sample and a repack.

Why one kilogram is the floor

A 1 kg pack of 5-MTHF is a large quantity by dose. At a 400 µg folate serving it contains 2.5 million servings, so the minimum is not set by how much a formulator needs; it is set by what can be packed, sampled, tested and traced as one lot. Below 1 kg the material is usually split from a larger lot and repacked, which adds handling and loses the original pack identity without changing the chemistry.

The same arithmetic makes the 25 kg drum a serious commitment. For a brand using a few kilograms a year, a drum is a multi-year supply, and the retest period matters more than the handling saving. The minimum is a pack decision, not a volume incentive; buy the pack that matches the trial, not the drum that looks efficient on paper.

The 1 kg pack is also the qualification unit. It can cover a bench trial, a pilot blend, a retained sample and an independent identity test, all from the same lot code. A smaller bench quantity can be discussed, but it is a split from a bulk lot and should be documented as one.

The pack options

Standard 5-MTHF packs
PackNet weightTypical useNotes
Foil pouch1 kgFirst trial or small batchFoil blocks light and moisture; close it again after use
Fiber drum25 kgProductionLiner inside; lot code on both drum and liner
Granulated powderOn requestFlow and dust controlNew particle profile; stability data for the granule

The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different specification, not a packing choice, because the particle-size line and the blend behaviour both move. If the dosage form needs a freer-flowing powder, say so before the quotation; the change may also move the lead time. A pre-blend with a carrier is a different product again, with a carrier to declare and a label to match.

Lead time and the dispatch date

The standard pack is offered at 1–7 days from order confirmation. The window covers picking, documents and dispatch; transit, customs and the customer's own release sit outside it. A custom granulation or a non-standard pack adds time; the quotation should carry that as a separate line.

Request the dispatch date as well as the lead time. A drum usually moves on a pallet, while a pouch can go as a parcel; the Incoterm decides who books freight and who clears customs. The documents should travel with the lot, not after it.

What makes a quotation firm

Six items make a quotation firm enough to compare:

  1. Product and form. Calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, with the salt written out.
  2. Specification. Assay and basis, water, pH, calcium where the form is to be confirmed, and the isomer ratio.
  3. Quantity and pack. 1 kg pouch, 25 kg drum, or the granulated variant.
  4. Destination and Incoterm. Country, port or address, plus the trade term.
  5. Documents. COA, specification and SDS, plus any statement the importer needs.
  6. Intended use and market. Whether the material goes into a supplement or another food, and the country of sale.

A quotation that leaves out the isomer ratio or the assay basis is incomplete for this material, because those two lines decide the weigh-out and the label. The same powder may fit one market and fall outside the file for another, and the paperwork is part of the offer. Commercial terms are stated on the quotation, not on this page.

A sample has to be a lot

The 1 kg pack is the qualification sample. Test identity, assay, water, calcium and the isomer ratio before scaling, and keep a retained sample drawn from that pack, and check that the lot code on the sample, the COA and the quotation agree. Without a lot code, a sample is a demonstration rather than a qualification.

Because the material is used at micrograms, one pack can support several bench trials and still leave a retained sample. That is a reason to keep the pack sealed and dry between trials, not a reason to split it into unlabelled jars. If the project needs a smaller quantity, discuss it before ordering and record the repack.

What to settle before the first order

The commercial side of the offer is the Incoterm, the pack, the lead time and the document set. The quality side belongs in the same conversation: specification revision, COA per lot, retained sample, retest period and change control. Settle the quality terms in writing before the first production order; a dispute is the wrong time to invent them.

Replacements and returns are governed by the quotation and the quality agreement. A lot that fails the agreed specification should go to the retained sample and a joint re-test, not to a photograph of the powder. Agree in advance who covers the referee test and which laboratory both sides will accept.

Catalog values are listed on the product hub; release tests on the COA page; the salt and isomer choices on the grades page; the MOQ glossary entry defines the term; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation