Custom processing · powders only
When the catalog grade is not the grade you need.
Particle size, granulation and packing can be adjusted around your process. What cannot be adjusted is the chemistry: the form, the assay and the document pack stay the same, or the change is quoted as a new specification after a feasibility review.
What can change
Physical form, not the molecule.
| Change | What it affects | What it does not |
|---|---|---|
| Milling to a finer mesh | Dissolution rate, capsule fill, dust | Assay or form |
| Sieving to a cut | Particle size distribution, flow | Chemistry |
| Granulation | Flow, bulk density, segregation | Assay, unless a binder is added |
| Packing configuration | Handling, dose-room weighing | Specification |
What we do not do
- No OEM or ODM, and no finished capsules, tablets, gummies or sachets.
- No private-label production or consumer packaging.
- No change to the chemical form hidden inside a “custom” grade.
- No granulation aid or carrier without a declaration on the specification.
Process(01)
Four steps, no promise before the trial.
A custom physical form is a new specification, not a favour. The feasibility review decides whether it can be released; the sample decides whether it fits the process.
Brief
The current specification, the target particle size or granulation, the dosage form and the quantity. A competitor COA is enough to start.
Feasibility
We confirm what the mill, the granulator and the sieve can hold, and whether the change affects the certificate or the stability data.
Sample
A sample of the proposed grade is produced and tested against the revised specification before the first order is quoted.
Release
The revised specification, the COA and the packing are agreed in writing, then the lot is released against them.
What changes in the file
The certificate has to follow the powder.
A milled or granulated grade gets its own specification line for particle size and bulk density, and its own COA. If a granulation aid is used, it is declared. If the process changes the loss on drying, the stability data is reviewed before the shelf life is carried over.
What to send
- The current specification or a competitor COA.
- The target mesh, particle size distribution or granulation.
- The dosage form and the process step the powder has to survive.
- The quantity and the destination market.
Next step
Send the brief. We will confirm what is possible.
A target mesh, a flow problem or a fill-weight constraint is enough to start. We reply with the physical form we can release and the tests that will document it.