05 Compliance

The regulatory file for 5-MTHF

Technical document 05 · Reviewed 2026-11-19 · 5-MTHF

On this page
  1. What belongs in the file
  2. European Union
  3. United States
  4. Contaminants and the finished product
  5. Label wording and claims
  6. Documents to keep with each lot
  7. Before the first order

5-MTHF is supplied as calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, and the regulatory file is built around that exact salt, the folate declaration and the destination. The catalog specification and the batch COA describe the material; the buyer's regulatory team confirms the route for the market. This page lists the framework, the limits and the documents that belong in the file, so that the specification and the pack on the purchase order can be read as one file.

In one line

The specification describes the salt; the regulatory file has to show the form, the folate declaration and the destination route behind it.

What belongs in the file

A usable file settles four questions. Which material and which specification revision are being bought? Which lot is being released, and what does its certificate show? Which contaminant limits and label rules govern the finished product? And what happens when the supplier, the route or the pack changes? The COA covers the lot, the TDS covers the specification and the SDS covers handling; none of the three settles the route.

The file should also hold the allergen and GMO declarations, the origin record, the residual-solvent statement, the isomer statement and any customer-specific declaration. Where a statement is missing for the lot, name the gap before the order rather than at the port. A version-controlled document list is worth more than a folder of undated PDFs.

European Union

In the EU, the file starts from the specification, the contaminant results and the label. General food law and the food-information rules under Regulation (EU) No 1169/2011 apply, and food supplements are governed by Directive 2002/46/EC, which carries a list of vitamin and mineral substances permitted for use in supplements. Where the route relies on that list, the entries are form- and salt-specific, and the current consolidated text is the reference rather than a summary. The buyer's regulatory team confirms which entry, if any, covers the material for the destination member state.

The folate declaration uses the EU nutrient reference value of 200 µg, and the label percentage is calculated from the folate content of the serving, not from the mass of the salt. A product that names one salt on the ingredient list and calculates the percentage from another will not reconcile. If the source is not covered by the permitted list, a novel-food route under Regulation (EU) 2015/2283 may be the relevant framework; the buyer confirms whether it applies and what the authorisation covers, as of this review and against the current text.

United States

The US file is built around the dietary ingredient, its source and its intended use. The Supplement Facts panel gives folate in dietary folate equivalents, with a Daily Value of 400 mcg DFE for adults and children aged four years and older; the ingredient list names the salt. The DFE factor is set by the labelling rule; a factor written for folic acid is not a factor for a methylfolate salt. The label review settles the arithmetic.

Where a source relies on a new dietary ingredient notification, that notification is specific to the source and the use, and the buyer confirms that it covers the material and the finished product. The certificate does not establish the route, and a supplier's marketing statement is not a substitute for the filing. The label and any claim are reviewed separately from the certificate.

Contaminants and the finished product

The contaminant numbers have to be calculated on the finished product, not only measured in the drum. The table below is the usual starting point for a food-supplement file; the destination text and the daily dose set the final figure.

Contaminant reference values for a supplement
ContaminantReference limit for a supplementEvidence the file needs
Lead (Pb)3.0 mg/kg in the supplementA measured lot result, the method and the finished-product calculation
Cadmium (Cd)1.0 mg/kg in the supplementA measured lot result and any category exception
Mercury (Hg)0.10 mg/kg in the supplementA measured lot result and the method
Arsenic (As)Customer or market limitThe agreed limit and the method, stated on the certificate

The upper intake level usually quoted for folate is 1,000 µg/day, and it is expressed for folic acid rather than for 5-MTHF. It is a folic-acid number and cannot be carried across to a 5-MTHF dose by mass arithmetic; the destination text and the form decide how the limit is applied. Check the current text before the label is signed off.

Label wording and claims

The label names the material, the amount and the source as the destination requires. The claim review is separate: the brand's regulatory reviewer confirms that the wording is permitted for the product, the form and the market. A certificate is not a claim approval, and a claim cannot alter the specification.

We make no health claim on this page. Any folate claim has to be selected from the destination's permitted list, worded as the list words it, and supported by the dose in the finished product. A claim written for folic acid does not transfer to a methylfolate salt without a check, because the ingredient name and the declared folate figure both change.

Documents to keep with each lot

Documents in the 5-MTHF file
DocumentWhat it answersScope
Certificate of analysisWhat this lot measured, by which method, against which limitPer lot
Technical data sheetThe catalog specification and the formPer grade
Safety data sheetHandling, storage and transportPer grade
Allergen, GMO and origin statementsSource and cross-contact questionsPer lot or per site
Residual-solvent and isomer statementsProcess residues and the (6S)/(6R) ratioPer lot

Each document should carry the specification version it refers to. A certificate issued against an old revision is not evidence for the current purchase, even when the numbers look the same.

Before the first order

  • Specification version, CAS number and the exact calcium salt are named.
  • The folate declaration and the salt name on the label match the destination file.
  • The COA, TDS, SDS and the supporting statements (allergen, GMO, origin, residual solvents, isomer) are present.
  • Each contaminant result has been converted to the finished-product dose.
  • The claim wording has been checked against the destination's permitted list.
  • Source, process and pack are under change control, and the quotation, specification and certificate refer to the same version.

Catalog values are listed on the product page; the COA page explains the lot certificate; analytical evidence is on the identity page. Release is handled on the quality page, and the EU and US notes give the framework references. Folic acid is a separate ingredient, with its own file on the folic acid page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation