5-MTHF grades: the salt, the isomer and the particle
The catalog grade is calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, with an assay of 95.0–101.0% by HPLC, water ≤5.0%, pH 6.0–8.0 and ≥95% through 40 mesh. Within that name there are still choices: the (6S) isomer ratio, the water content, a standard or a granulated powder, and other folate salts that are different materials rather than strengths of the same one. The label and the dosage form fix the grade before the powder does.
5-MTHF is a family name: the calcium salt, the isomer ratio and the particle size are three separate specification lines before the powder is the same material.
Why 5-MTHF is not one grade
“5-MTHF” names the reduced 5-methyl folate, not a single powder. The methyl group sits at N5 of the pteridine ring, and the molecule carries a chiral centre at C6. The naturally occurring (6S) form and the (6R) form are diastereomers with the same mass and the same elemental analysis, so a certificate that reports only a percentage has not said which one is in the drum.
Commercial material is sold as a salt, because the free acid is less convenient to handle and less soluble. The calcium salt is a 1:1 salt with a molecular weight of 497.52 and a calcium content of 8.06%. The glucosamine salt is another commercial salt with its own mass, its own assay convention and its own label name. The free acid, levomefolic acid, CAS 31690-09-2, is the parent molecule and a reference material rather than a drop-in replacement. A purchase order that says “5-MTHF” has specified none of this.
The isomer question is a grade question, not a laboratory detail. A product sold on the natural isomer should state the (6S) content or the diastereomer ratio on the certificate; a powder that meets the assay range while carrying a larger (6R) fraction is not the same material per milligram.
The grades and forms side by side
| Grade or form | What it is | Assay convention | Where it fits |
|---|---|---|---|
| Calcium L-5-MTHF, 40 mesh (catalog) | 1:1 calcium salt, standard powder | HPLC 95.0–101.0%; water ≤5.0% | Capsules, tablets and stick packs |
| Calcium L-5-MTHF, granulated | Same salt, larger and freer-flowing particles | Same chemistry; a new particle-size line | Blends that need flow and low dust |
| (6S)-5-MTHF glucosamine salt | Different counter-ion and different mass | Separate salt, assay and label name | Only where the label and file name it |
| 5-MTHF free acid | Levomefolic acid, no counter-ion | Reference-standard grade | Standards and non-aqueous work |
| Folic acid | Fully oxidised pteroylmonoglutamic acid | 97.0–102.0% on the anhydrous basis | A different ingredient with its own file |
The first two rows describe the same material with a different particle profile. The last three do not: they are different purchases, with different label names, assay methods and market files. A quotation that presents them as interchangeable has compared words, not drums.
Solubility, appearance and handling
The calcium salt is a white to off-white, free-flowing powder. It dissolves in water to give a solution that is neutral to slightly alkaline, which matches the 6.0–8.0 pH line on the catalog. It is not a colorant and should not be judged like folic acid's yellow-orange crystal: a yellow or brown cast in a 5-MTHF lot suggests oxidation or light exposure, not a stronger grade.
The standard powder passes 40 mesh at ≥95%. Granulation makes the powder freer-flowing and less dusty, but it is a specification change, not a packing choice: the particle-size line moves, the blend behaviour moves, and the stability study should cover the granular form if that is what will be bought. At a dose measured in micrograms, the ingredient is a small fraction of the blend, so flow, static and segregation decide uniformity more than the drum assay does.
Both grades need a sealed, light-resistant pack. The 1 kg foil pouch and the 25 kg fiber drum are described on the MOQ page, and the storage rationale is on the stability page.
Dose arithmetic and the dosage form
The salt factor follows from the molecular weights. The 5-MTHF acid is 459.46 g/mol and the anhydrous calcium salt is 497.52 g/mol, so the folate fraction is 459.46 ÷ 497.52 = 0.9235. One milligram of the anhydrous salt carries about 0.924 mg of 5-MTHF acid. A label that declares 400 µg of folate as 5-MTHF acid needs 400 ÷ 0.9235 = 433 µg of the salt at 100% assay, or about 442 µg at 98% assay. The arithmetic is not a recommendation; it is how the label and the weigh-out are reconciled.
The isomer ratio enters the same calculation. If a lot carries a larger (6R) fraction, the mass of the natural (6S) form per milligram is lower, and a formula built on the assumption of pure (6S) will under-deliver. Ask for the ratio and use it in the weigh-out, or buy a grade that states it.
The dosage form narrows the choice further. A capsule or tablet takes the standard 40 mesh powder, but the fill is hygroscopic and the excipients can transfer moisture. A stick pack or drink mix suits the salt because it dissolves; a granulated grade helps flow in a blend. A gummy brings water activity and process heat into the decision, and the stability work should be run in the gummy rather than borrowed from a capsule. In every case the grade, the particle size and the isomer claim should be written into the specification before the first blend.
Specification lines for the grade
- “Calcium L-5-methyltetrahydrofolate, CAS 151533-22-1, C₂₀H₂₃CaN₇O₆·xH₂O, calcium salt (1:1).”
- “Assay 95.0–101.0% by HPLC, with the basis stated on the certificate; water ≤5.0% by Karl Fischer.”
- “pH 6.0–8.0 at 1% in water; appearance white to off-white.”
- “Calcium about 8.06% on the anhydrous basis where the form is to be confirmed.”
- “Diastereomer ratio: state the (6S) content or the (6S)/(6R) ratio.”
- “Particle size ≥95% through 40 mesh, or the agreed granulated profile, with the contaminant and microbiological limits as tabulated.”
- “Destination market and the label name of the salt confirmed before the order.”
The catalog values are listed on the 5-MTHF product page. The folic acid comparison continues on the level-four page; the COA page explains how those lines are reported; the form tests are on the identity page; the other folate ingredient has its own folic acid page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation