02.1 Oxide vs sulfate

Zinc oxide vs zinc sulfate: elemental zinc, solubility and the route

Technical document 02.1 · Reviewed 2026-11-19 · Zinc Oxide

On this page
  1. Two forms, two zinc figures
  2. Solubility and what it decides
  3. Fill weight, blend uniformity and taste
  4. The route: what the framework asks
  5. What the label has to say
  6. When to choose which

Zinc oxide and zinc sulfate heptahydrate carry very different amounts of zinc: about 80% against about 23%, so the same 10 mg zinc dose needs about 13 mg of the oxide or about 44 mg of the heptahydrate. The oxide is practically insoluble in water and dissolves in acid; the sulfate is freely soluble and carries about 44% water of crystallisation. The dosage form, not the assay, decides which one fits.

In one line

Ten milligrams of zinc is about 13 mg of zinc oxide or about 44 mg of zinc sulfate heptahydrate, and the solubility decides which form the dosage form can use.

Two forms, two zinc figures

The arithmetic starts with the formula. One mole of ZnO weighs 81.38 g and 65.38 g of it is zinc, so pure oxide is 80.34% zinc; the catalog range is 78.0–80.0%. Zinc sulfate heptahydrate, ZnSO4·7H2O, is 287.56 g/mol and carries one zinc, so it is 22.7% zinc, and roughly 44% of its mass is water of crystallisation. The anhydrous sulfate sits between them at about 40.5%.

Zinc oxide and zinc sulfate heptahydrate compared
PropertyZinc oxideZinc sulfate heptahydrate
FormulaZnOZnSO4·7H2O
CAS number1314-13-27446-20-0
Molecular weight81.38287.56
Zinc contentAbout 80.3% (catalog 78.0–80.0%)About 22.7%
Water of crystallisationNoneAbout 44% by mass
Solubility in waterPractically insolubleFreely soluble
Behaviour in acidDissolves to the zinc ionAlready in solution
Mass for 10 mg zincAbout 12.6 mgAbout 44 mg

The last row is the one that changes a formulation: the same declared dose is a few milligrams of oxide or more than three times that mass of sulfate, and the difference moves into the capsule size, the tablet weight and the share of the blend the zinc source occupies.

Solubility and what it decides

The oxide is practically insoluble in water, at a few milligrams per litre, so a zinc oxide drink is a suspension rather than a solution. The sulfate dissolves freely, so it can be used in a clear liquid, a syrup or a stick pack that has to disappear in water. That is the practical dividing line between the two forms.

The oxide is amphoteric: an acid takes it to the zinc ion and a strong alkali to a zincate, and both are reactions a formulator can plan for. The sulfate is a salt that is already in solution, and it brings sulfate with it, which adds to the ionic load and to the taste of the finished product.

Solubility is not the same as what happens in the body. How much zinc is absorbed from a given form is a clinical question; the formulation question here is narrower: can the dosage form carry the material in the state it needs?

Fill weight, blend uniformity and taste

For a capsule, the fill-weight difference is real but rarely decisive at 10 mg of zinc: both 13 mg and 44 mg fit. It becomes decisive when the dose is high, the capsule is small, or the zinc source shares the fill with other actives. At 25 mg of zinc, the sulfate needs about 110 mg against about 31 mg of oxide, and the gap starts to shape the formula.

In a powder blend, the oxide's small mass is a uniformity risk. A dense, insoluble white powder at 2% of a blend can settle away from the light excipients, while the sulfate at 8% disperses differently because it is more soluble and less dense. Neither is automatically easier; the mixing step has to be validated for the material chosen.

Taste separates them in a drink. The sulfate is astringent and metallic at use level, while the oxide is chalky and settles. A flavoured suspension and a clear drink are different products, so the form follows the product.

The route: what the framework asks

In the EU, the reference framework is Directive 2002/46/EC, whose Annex II names the mineral substances and their salts that may be used. Zinc oxide and zinc sulfate are separate entries, so the label has to name the form that was used. The feed and food-additive routes are separate instruments with their own limits. The buyer's regulatory team decides which one applies to the destination and to the product.

The US route is the dietary-supplement framework: the panel declares elemental zinc, and the ingredient list names the source. Whichever route applies, the form on the label, the form on the certificate and the form in the drum have to be the same material.

The route is also physical: a clear beverage cannot carry the oxide, and a dry capsule does not need the sulfate's water. Most failures here are a mismatch between route and form, not a purity problem.

What the label has to say

The label names the source and declares the element. In the EU the ingredient list carries the name from the permitted list, and the nutrition declaration gives zinc in mg and its share of the 10 mg/day reference intake. In the US the Supplement Facts panel gives zinc in mg and its percentage of the 11 mg Daily Value, with the source in the ingredient list.

The two forms are not interchangeable on a label. A formula switched from sulfate to oxide without a label change would name the wrong ingredient, and a blend that contains both has to name both, in order of weight. The element declaration stays the same; the source declaration does not.

The dose declaration has to match the weigh-up. A label that declares 10 mg of zinc from the oxide assumes about 12.6 mg of oxide; the same 10 mg from the sulfate needs about 44 mg. An overage or a conversion applied to the wrong figure is a labelling error before it is a quality one.

When to choose which

Choose the oxide for a capsule, a tablet or a dry blend where the dose is small, the fill weight is tight, and the material has to be dense, white and stable in the pack. It also suits an acidic drink mix that dissolves it at the point of use, and a formula where the sulfate's water and taste are a problem. We supply the oxide.

Choose the sulfate when the zinc has to be in solution, when a clear liquid is the product, or when the process is built around a soluble salt. The heptahydrate is the common commercial form; the anhydrous salt is the option where the water of crystallisation is unwanted, at a different zinc figure again.

If the formulation needs a salt other than the sulfate, the catalog's alternative is zinc citrate dihydrate, which is only slightly soluble in water — check that before designing a clear drink — and the zinc bisglycinate page covers the chelate route for a dry blend. The oxide's specification sits on the product page; its own grade question is covered on the grades page; the destination file is covered on the compliance page; the assays are explained in the methods library; the quality page sets out the release process.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation