05 Compliance

The regulatory file for zinc oxide

Technical document 05 · Reviewed 2026-11-19 · Zinc Oxide

On this page
  1. The four checks
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Claims and labelling
  6. The document pack
  7. Checklist before the first order

Zinc oxide reaches a market through a defined route, and the file has to show that the grade, the lead result and the label match that route. In the EU, the supplement framework is Directive 2002/46/EC; Annex II carries the permitted mineral substances and their salts, and zinc oxide is one of the zinc entries. In the US the route is the dietary-supplement framework, with elemental zinc on the panel and the oxide in the ingredient list. Which route covers the destination and the finished product is for the buyer's regulatory team to confirm.

In one line

The oxide entry, the lead ceiling and the label wording are three separate checks, and the grade has to be written into all three.

The four checks

A zinc oxide file answers four questions. Is the form on the destination's permitted list? Is the grade the one that list, or the customer, expects? Are the contaminant results below the ceiling at the finished dose? And does the label carry the source and the zinc figure in the form the market asks for?

The four answers move independently. A form accepted in one market may be unlisted in another; a ceiling set for the finished product cannot be applied to the drum; a label that satisfies one regulator may fail the next. The certificate answers the lot question, not the route question.

European Union

Food supplements in the EU are governed by Directive 2002/46/EC, whose Annex II lists the permitted mineral substances and their salts. Zinc oxide is named there as a zinc source, in a separate entry from the other zinc compounds, so the label has to match the form on the certificate. The listing is the start of the review: the Member State notification, the label rules of Regulation (EU) No 1169/2011 and the ceilings in Regulation (EU) 2023/915 sit on top of it.

The EU reference intake for zinc is 10 mg/day, and the tolerable upper intake for adults is 25 mg/day as of this review. Both matter at the dosage stage: a formula already near the upper level has little room for a second zinc source, so a blend can turn into a compliance problem. They are references for the formulation review, not targets for the label.

The food-additive and fortification routes are a different question, and a product sold as a food rather than a supplement may fall outside the Annex II framework. This page is a snapshot: Annex II and the claim register change, so check the consolidated text on the day the label is signed off.

United States

The US asks a different first question: what is the basis for this exact form as a dietary ingredient? The answer may rest on a marketing history before DSHEA, on a GRAS conclusion for the intended use, or on a new dietary ingredient notification. A supplier ought to be able to name the basis and produce the document behind it; the brand confirms it covers the finished product.

The Supplement Facts panel carries zinc as the element, in milligrams, with its share of the Daily Value, which is 11 mg for adults and children four and older. The oxide sits in the ingredient list. The claim review is separate: a structure/function statement is the brand's own text, supported by the brand's evidence, and it must carry the DSHEA disclaimer; a disease claim is outside the framework.

No federal maximum for lead is written specifically for supplements; the California Proposition 65 threshold, read against the daily dose, may decide whether the label needs a warning. That state question belongs in the file too.

Contaminants and limits

The panel is calculated on the finished product, not only measured on the drum. A supplement file starts with the table below; the destination text and the daily dose set the final figure.

Contaminant ceilings to check against the daily dose
ElementReference level for a supplementEvidence to keep on file
Lead3.0 mg/kg in the EU supplementLot result, method, detection limit and the finished-product calculation
Cadmium1.0 mg/kg in the EU supplementLot result and any category exception
Mercury0.10 mg/kg in the EU supplementLot result and method
ArsenicNot harmonised in the EU; Member State limits possibleThe limit agreed with the customer, the method used and the lot result

For zinc oxide the lead line does more work than the others. The oxide comes from a zinc source, and a technical or pigment grade is not written against a food ceiling; a lot that would be unremarkable as a pigment can sit far above 3 mg/kg. That is why the grade statement and the per-element result belong in one specification.

Claims and labelling

The EU claim framework is Regulation (EC) No 1924/2006, with the Union list of authorised claims in Regulation (EU) No 432/2012. Zinc statements appear there with conditions of use, and they describe normal function rather than disease. In the US a structure/function statement is the brand's own wording, and the disclaimer sits beside it. A statement about a disease is outside both frameworks.

No statement here is a claim for the ingredient. This page publishes the specification and the regulatory map; the label wording and its evidence are the brand's.

The document pack

The file normally holds:

  • A certificate for the lot, covering assay, zinc, loss on drying, lead, microbiology and mesh.
  • A TDS and a purchase specification that name the oxide, the grade and the particle size.
  • An SDS in the 16-section format.
  • Allergen, GMO, origin and residual-solvent statements; short for an inorganic oxide, but still needed.
  • The dietary-ingredient or permitted-list basis that the destination requires.
  • An independent certificate where the buyer's review requires one.

Each document should name the lot or point to it. A generic TDS beside a lot certificate is only a matched pair when grade, form and pack line up.

Checklist before the first order

  1. Is the grade named — supplement, feed, pharmacopoeial or technical — and does the certificate state it?
  2. Does the label name the zinc source as the destination's list names it, and declare the zinc in the required unit?
  3. Do the contaminant figures clear the destination ceiling at the daily dose actually used?
  4. Is the dietary-ingredient or permitted-list basis documented for this form?
  5. Are the pack, the lot code and the retained sample tied to the documents?
  6. Is the source, grade and pack under change control, with a written notice route?

Why the grade belongs to the regulatory question is set out on the grades page; the analytical evidence for the grade is on the identity page; the parameters the file has to support are listed on the COA page. The specification itself is on the zinc oxide product page, while the lot file is assembled as described on the quality page. Market notes for the EU and the US gather the instruments.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation