Which zinc oxide grade: supplement, feed, technical or pharmacopoeial
Zinc oxide is a single chemical, so the grade is not a different molecule but a different specification: the lead and heavy-metal panel, the particle size and surface area, the presence or absence of a coating, and the documentation written against a food, feed, pharmacopoeial or technical standard. A supplement grade is defined by the contaminant panel at the finished dose; a pigment grade is defined by colour and reactivity. The two are not interchangeable even when both assay above 99%.
Zinc oxide is one molecule; the grade is the lead result, the particle size and the documentation written around it.
Why one oxide has several grades
The oxide is made by oxidising zinc vapour, by oxidising an ore concentrate, or by precipitating a zinc salt and calcining the precipitate. Each route gives a different particle size, a different surface area and a different trace-element profile. The chemistry is the same; the powder around it is not.
The commercial names follow the use. A grade written for rubber, ceramics or paint is judged on colour, tint strength and reactivity. A cosmetic or UV grade is judged on particle size, dispersion and often a surface treatment. A grade written for feed or food is judged on the contaminant panel and on the documentation. A pharmacopoeial grade is written for pharmaceutical use and carries its own monograph tests. None of these is a stricter version of another; they are different gates.
The grades side by side
| Grade | Written against | Lead and trace elements | Particle size | What the file carries |
|---|---|---|---|---|
| Supplement / food | Contaminant panel at the finished dose | Low; per-element results | Milled, ≥95% through 40 mesh | COA, TDS, SDS, allergen and GMO statements |
| Feed | Feed-additive rules and maximum content in feed | Low; per-element results | Milled or granulated | Feed-additive identity and incorporation limits |
| Pharmacopoeial | A pharmacopoeial monograph | Monograph tests, not the food panel | Monograph description | Monograph compliance statement |
| Technical / pigment / cosmetic | Colour, tint, UV performance or reactivity | Not written for a food ceiling | Set by optical or UV performance | Technical data sheet only |
| Granulated | The same chemistry, a coarser particle | Follows the base grade | Agglomerated, low dust | COA with the granulation stated |
The first column is the one to write into the purchase order. “Zinc oxide 99%” does not name a grade; it names an assay that all five rows can meet.
Particle size, surface area and flow
Particle size is a functional line, not a cosmetic one. A finer oxide has more surface per gram, dissolves faster in acid and disperses more readily, but it also makes more dust, packs more tightly and can be harder to blend. A coarser or granulated oxide flows better and carries less dust, which matters on a tableting line and in a weighing booth.
The catalog form is a powder milled to ≥95% through 40 mesh, with granulation available on request. The mesh figure is a sieve specification: it says what passed a 40 mesh screen, not what the primary particle size is. A pigment grade can pass the same sieve and still be built from primary particles an order of magnitude smaller, because those particles are agglomerated. If the formula depends on the reaction rate, ask for the surface area as well as the mesh.
Bulk density follows the same logic. The oxide is dense for a mineral powder, so a capsule holds a small mass of it relative to an organic salt. That helps when the dose is high and the fill weight is the constraint, and it makes a small mass harder to spread evenly through a large blend.
Which grade fits which dosage form
A capsule or tablet takes the milled supplement grade. The mass per dose is small, the powder is dense and free-flowing enough to fill, and the contaminant panel is the deciding line. A tablet may prefer a granulated grade for flow and for less dust; the granulation is a physical change, and the certificate should say so.
A powder blend takes the same grade, but the small mass of oxide in a large blend is a uniformity risk. The oxide is dense, insoluble and white, and it can settle away from the light excipients. Match the particle size to the blend and validate the mixing step rather than assuming that a 40 mesh powder distributes itself.
A drink mix is the case where the grade alone does not solve the problem. Zinc oxide does not dissolve in water to any useful degree, so a drink mix built on it is a suspension, and a clear drink needs a different zinc source. That comparison is on the oxide-versus-sulfate page.
What to write into the specification
- “Zinc oxide, ZnO, CAS 1314-13-2, supplement grade, not a technical or pigment grade.”
- “Assay (ZnO) ≥99.0%; zinc 78.0–80.0%, both on the dried basis.”
- “Lead ≤3 mg/kg; arsenic ≤2, cadmium ≤1, mercury ≤0.1 mg/kg, reported per element.”
- “Loss on drying ≤0.5%; particle size ≥95% through 40 mesh; surface area on request.”
- “Microbiology as listed; no coating and no carrier unless declared.”
- “Grade statement, source and change-control route named on the certificate.”
Two lines do most of the work. The grade statement stops a pigment lot from being substituted, and the per-element lead result makes a substitution visible if it happens. The assay on its own proves neither.
When the oxide is the wrong grade
If the formula needs the zinc in solution, the oxide is the wrong starting point at any grade: a finer powder makes a better suspension, not a solution. If the market file covers a different zinc compound, the grade question is secondary to the form question. And if the application is pharmaceutical rather than a supplement, a pharmacopoeial grade and its monograph are the relevant specification, not a food panel with a mesh line attached.
The converse matters too. A buyer who needs a dense, high-zinc powder for a compact tablet should not accept a lighter, more soluble salt because the assay looked similar. The grade is part of the material.
The oxide's catalog specification is on the product page. Line-by-line reporting is on the COA page; the tests that stand behind the grade are on the identity page; the zinc citrate page covers the alternative when a more soluble salt is wanted; the release file is described on the quality page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation