06 Identity & adulteration

How we prove a ferrous lactate lot is the ferrous salt

Technical document 06 · Reviewed 2026-11-19 · Ferrous Lactate

On this page
  1. Four questions, four kinds of evidence
  2. The ratio: iron against lactate
  3. Infrared, diffraction and the solid state
  4. What adulteration looks like
  5. How to write the identity specification
  6. Five questions for the supplier

Proving a ferrous lactate lot takes four kinds of evidence: the declared name and hydrate, the ferrous reaction and the infrared spectrum, the iron figure with its basis, and the physical and contaminant limits. Only the iron figure puts a number on the metal, and it cannot prove the anion or the water. The four together are the identity.

In one line

Identity is the ferrous reaction and the infrared spectrum for the salt, the iron titration for the metal, and the lactate-to-iron ratio that rules out a second iron source.

Four questions, four kinds of evidence

What each identity layer proves and what it cannot
QuestionEvidenceWhat it establishesWhat it cannot
Is the material named?Name, hydrate, CAS, formulaThe file is about the right substanceAnything about the drum
Is the ion ferrous?Ferrous reaction and infrared spectrumThe oxidation state and the lactate ligandHow much iron is present
How much iron?Complexometric titrationThe iron contentThe water, the hydrate and any diluent
Is the ratio right?Lactate by HPLC with ironThe stoichiometry of the saltNothing about water or an inert carrier
Is it fit to ship?Loss on drying, mesh, metals, microConformity to the physical limitsIdentity, which needs the rows above

The ferrous reaction is the simple one: an aqueous solution gives a dark blue precipitate with potassium ferricyanide, which shows the ferrous ion and not the anion. The infrared spectrum identifies the lactate: a carboxylate band near 1600 cm−1 and a broad hydroxyl band near 3400 cm−1, compared with a reference rather than read band by band. The reaction proves the oxidation state, the spectrum proves the ligand.

The ratio: iron against lactate

The anhydrous salt is 76.13% lactate and 23.87% iron, a mass ratio of 3.19 to 1. The ratio is fixed by the formula and it does not move with hydration: in the dihydrate the iron falls to 20.68% and the lactate to 65.97%, but the two stay in the same 3.19 proportion, and the water accounts for the rest. Report the lactate by HPLC and the iron by titration on the same sample.

What the ratio catches is a second iron source. Add iron oxide, ferric lactate or another ferrous salt and the iron rises against the lactate; add lactic acid or a lactate salt and the lactate rises against the iron. What it does not catch is water or an inert carrier, because both fractions fall together and the ratio holds. The mass balance does that job: iron plus lactate plus loss on drying should approach 100%, and the gap is the diluent or an error.

The formula also links the two catalog windows. At an assay of 96.0% the iron works out to 22.9%, and at 101.0% it works out to 24.1%, which is the shape of the 23.0–24.5% window. The small differences are method and basis, and the certificate should state both.

Infrared, diffraction and the solid state

The infrared spectrum is the routine identity: it shows the lactate carboxylate and hydroxyl bands and is compared with a reference. It does not measure the iron, and it does not separate the anhydrous salt from a hydrate with confidence, because the water and hydroxyl bands overlap.

X-ray diffraction answers the hydrate question. The anhydrous salt and the dihydrate and trihydrate have different lattices, so a pattern compared with a reference can show which solid is present. It can also show a crystalline ferric phase such as goethite above its detection limit; it will not see amorphous ferric hydroxide. XRD is not a routine release test here, and a certificate that reports “XRD conforms” without the pattern and the reference has added little.

Ask for the reference spectrum or pattern, the detection limit and the sample preparation. The FTIR note and the XRD note explain what each technique supports.

What adulteration looks like

Routes for ferrous lactate and the tests that show them
RouteWhat movesTest that shows it
Hydrate sold as anhydrousIron and lactate fall together; loss on drying risesLoss on drying, mass balance, XRD
Second iron sourceIron rises against lactateLactate-to-iron ratio; total iron against titration
Lactate or lactic acid spikeLactate rises against ironLactate-to-iron ratio; pH
Inert carrierBoth fractions fall; ratio holdsMass balance; IR for a foreign spectrum
Oxidised lotFerrous falls; total iron holds; colour darkensRedox titration against total iron

The pattern repeats in every row: one figure shifts while its partner holds. That is why the numbers have to be read in pairs, and why a certificate with an iron percentage alone has answered one of the five questions.

How to write the identity specification

  • “Ferrous lactate, anhydrous, C6H10FeO6, CAS 5905-52-2.”
  • “Identification: ferrous reaction and infrared spectrum against a named reference.”
  • “Iron 23.0–24.5% by complexometric titration; assay 96.0–101.0% with the basis stated.”
  • “Lactate by HPLC reported; the lactate-to-iron ratio to be consistent with the salt.”
  • “Loss on drying ≤1.0%; ≥95% through 40 mesh.”
  • “Ferric iron to be agreed; no added ferric salt, iron oxide or diluent.”

Five questions for the supplier

  1. Is the lot anhydrous or a hydrate, and what are the iron figure and the loss on drying?
  2. Can you provide the infrared spectrum against a named reference, not only a conformity statement?
  3. What is the lactate result by HPLC, and does its ratio to iron match the salt?
  4. Which titration was used for iron, and does it count ferric iron as well?
  5. If the lot is disputed, will you accept a joint re-test on the retained sample?

Five direct answers make an identity file; a single iron percentage does not. The product hub carries the catalog specification; the COA page shows where each figure sits; the grades page compares the hydrates; the ferrous gluconate page is the parallel file for the other soluble ferrous salt; the quality page describes release.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation