The regulatory file for ferrous lactate
Ferrous lactate is an iron salt, and the regulatory file for it is built around the exact salt, the hydrate, the daily dose and the destination. The catalog specification and the lot certificate describe the material; the buyer's regulatory team confirms the route for the market and the finished product. This page lists the framework, the limits and the documents that belong in the file.
The salt, the hydrate and the dose decide the route, and the file has to show all three for the destination.
What the file contains
Four questions organise the file: what the material is, and which specification revision is being bought; which lot is being released, and what its certificate says; which limits and label rules the finished product must meet; and what happens when the source, the process or the pack changes.
The lot certificate covers the batch, the technical data sheet covers the specification, and the safety data sheet covers handling. None of the three settles the route on its own. Keep the allergen, GMO, origin and residual-solvent statements in the same place, with version numbers, so the file reads as one document rather than a folder of undated files.
For an iron salt there is a second layer. The same salt can be used as a nutrient and, in some markets, as a food additive. Those are different routes with different maximum levels and different label rules, and the file has to say which one the finished product relies on. Narrowing the iron figure to one salt and one hydrate is the first step, because a limit written for a different form does not apply.
European Union
In the EU, the general framework is Regulation (EC) No 178/2002 on general food law, with the labelling rules of Regulation (EU) No 1169/2011 and the contaminant limits of Regulation (EU) 2023/915. Food supplements are also governed by Directive 2002/46/EC, whose Annex II lists the permitted vitamin and mineral forms; the buyer's team checks that the named form and the current text cover the product.
The EU harmonises the permitted forms, not a single maximum amount of iron in a supplement. Member State rules differ, and the target market has to be named before the dose is fixed. The additive route is separate: where ferrous lactate is used for colour retention rather than as a nutrient, the maximum is written as total iron per kilogram of food, not as milligrams of the salt. Both routes need the same lot evidence and a different label review.
“As of this review” is the right qualifier for every citation on this page; the consolidated text is the reference, not a summary.
United States
In the US, a dietary supplement is regulated under the Dietary Supplement Health and Education Act and the cGMP rule in 21 CFR 111, with the Supplement Facts panel under 21 CFR 101.36. The ingredient's status for use in a supplement rests on a listed food additive, a GRAS basis or an old dietary ingredient, and the supplier should be able to name the basis it relies on.
The buyer's regulatory team confirms that the basis covers the finished product and the claim. A conventional food uses a different route, and the iron level and the serving size have their own rules. The label and the claim are reviewed separately from the certificate; a COA does not approve a claim.
Great Britain and Northern Ireland
The UK is two files, not one. Great Britain works to the GB register and GB labelling rules, while Northern Ireland stays inside the EU framework. Which of the two governs a shipment depends on the destination, and the buyer's team records that decision in the file rather than leaving it to the invoice.
Contaminants and limits
The contaminant panel is a calculation on the finished product, not only a drum result. Use the table as the starting point, then confirm the destination text and the daily dose, which decide the final limit.
| Element | Starting-point limit | Evidence to keep |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg, supplement basis | Lot figure, method, limit and the dose calculation |
| Cadmium (Cd) | 1.0 mg/kg, supplement basis | Lot figure and any category exception |
| Mercury (Hg) | 0.10 mg/kg, supplement basis | Lot figure and the method used |
| Arsenic (As) | Agreed customer or market limit | The agreed limit and method on the certificate |
Iron itself is the active component, and the dose decides whether the file holds together. A 20 mg iron claim takes about 82–87 mg of the anhydrous salt at the catalog window. A lead result of 3.0 mg/kg in the salt therefore arrives at about 0.5 mg/kg in a 500 mg capsule that carries 85 mg of the salt. Run that arithmetic before accepting a limit, because a limit written on the ingredient and a limit written on the finished product are not the same number.
The same calculation applies to the additive route, where the maximum is expressed as total iron in the food. The salt mass per milligram of iron has to be converted before the two numbers can be compared, and the hydrate changes the conversion.
Label and claims
The label names the ingredient in the form the destination requires. For this salt the name should carry “anhydrous” or the hydrate, because the iron figure per gram depends on it, and the quantitative ingredient declaration is read against the elemental iron the formula delivers.
Nutrient content claims are regulated separately: in the EU, Regulation (EC) No 1924/2006 and its annexes set the conditions for terms such as “source of” and “high in”, and the finished product's iron content decides eligibility. The brand's regulatory reviewer confirms that the wording, the form and the market line up. No disease-related claim is made for this ingredient, and the certificate supports none.
The documents in the file
- Specification with the form, assay, iron, loss on drying, mesh and the agreed ferric limit.
- COA per lot, with methods, detection limits and the basis.
- Technical data sheet and safety data sheet in the destination language where required.
- Allergen, GMO, origin and residual-solvent statements, dated and versioned.
- Contaminant and microbiology results, with the finished-product calculation.
- Change-control statement covering source, process, hydrate and pack.
Checklist before the first order
- Specification and quotation both name the anhydrous salt, its CAS number and the pack.
- The iron figure, its basis and the label arithmetic agree.
- Written confirmation of the route comes from the buyer's regulatory team.
- Contaminant figures are expressed per finished dose, not only per kilogram of salt.
- The label and any nutrient claim were reviewed against the destination rules.
- Source, process, hydrate and pack have a change-notification clause.
The catalog specification sits on the ferrous lactate product page; the lot evidence is on the COA page; the analytical tests are on the identity page; the release file is described on the quality page; the framework notes are in the EU regulatory note.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation