Minerals & Electrolytes · Core range

Ferrous Gluconate

C₁₂H₂₂FeO₁₄·2H₂O · CAS 299-29-6 · Ferrous gluconate dihydrate, powder

Ferrous gluconate dihydrate specified at 11.8–12.5% elemental iron on the dried basis, for capsules and tablets where the ferrous state and the hydrate have to be declared.

Iron (Fe), dried basis
11.8–12.5%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Iron (Fe), dried basis11.8–12.5% (cerimetric titration)
AppearanceGreyish-yellow to greenish-yellow powder
IdentificationFerrous reaction and IR conform
Loss on drying≤8.0%
pH (5% solution)3.0–5.0
Particle size≥95% through 80 mesh
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Chemical formulaC₁₂H₂₂FeO₁₄·2H₂O
CAS299-29-6
Marker setIron (11.8–12.5%, dried basis)
AppearanceGreyish-yellow to greenish-yellow powder
SolubilitySoluble in water with gentle warming; the solution is acidic.

Primary method Cerimetric titration — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the oxidation state and the hydrate: ferrous gluconate is not ferric gluconate, and the dihydrate carries water.
  • Ask for the iron assay and the ferrous/ferric ratio; oxidation changes the colour and the label.
  • Iron salts are hygroscopic and can catalyse oxidation in a blend; the pack and the matrix belong in the specification.
  • Confirm the elemental iron figure, not only the gluconate assay, when the label declares iron.

Buyer questions

Practical answers

What is Ferrous Gluconate specified to?

Iron (Fe), dried basis: 11.8–12.5% (cerimetric titration). The full specification adds Appearance, Identification, Loss on drying, pH (5% solution), Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which form of Ferrous Gluconate is this?

The catalog grade is Ferrous gluconate dihydrate, powder. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.

Which dosage forms does this grade fit?

Capsules and tablets, Powder sticks and drink mixes. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Ferrous Gluconate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.