04 MOQ & ordering

Ferrous lactate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Ferrous Lactate

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

Ferrous lactate is supplied with a 1 kg minimum, packed as a 1 kg foil pouch, with a 25 kg fiber drum as the bulk unit. Lead time is 1–7 days for the standard pack. A firm quotation needs the form, the iron figure, the quantity and pack, the destination and Incoterm, the documents and the intended market.

In one line

The first order is a pack with a lot code: one kilogram for the trial and the retained sample, a drum for production.

Why the minimum is 1 kg

A 1 kg pack covers a bench trial, a retained sample and an independent ferrous-iron test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack carries a lot code; it is not a scoop from a drum.

Below 1 kg, the material is usually split from a larger lot and repacked, which adds handling and loses the original pack identity. The 25 kg drum is the production unit: it reduces handling per kilogram but commits inventory and a longer storage period for a hygroscopic, oxidation-sensitive powder. The minimum is a pack decision, not a volume incentive.

Packs and formats

Standard ferrous lactate packs
PackNet weightTypical useNotes
Foil pouch1 kgTrial, retained sample, small batchMoisture and light barrier; close it after use
Fiber drum25 kgProductionLiner inside; lot code on drum and liner
Granulated powderOn requestFlow and dust controlFirmer granule; iron figure unchanged
Custom millOn requestBlend or tablet feedMesh change; new particle-size line

The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation or a different mesh is a process variant with its own particle-size line, not a different chemistry, and it should be agreed before the quotation because it may move the lead time.

Lead time and dispatch

Orders for the standard pack are quoted at 1–7 days from confirmation. Picking, paperwork and dispatch sit inside that window; freight transit, customs clearance and the customer's own release do not. A granulation or a non-standard pack adds time, which the quotation should show as a separate line.

Book against a dispatch date rather than the lead-time phrase. A drum may travel on a pallet and a pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The documents travel with the lot, not after it.

What a quotation needs

Six items make a quotation firm enough to compare:

  1. Product and form. Ferrous lactate, anhydrous, CAS 5905-52-2, with the hydrate state written out.
  2. Specification. Assay and basis, iron figure, loss on drying, mesh, heavy metals and microbiology.
  3. Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or milled variant.
  4. Destination and Incoterm. The delivery country, the named place and the trade term that applies.
  5. Documents. COA, specification and SDS, plus the declarations the importer must hold.
  6. Use and market. A supplement, a food or another use, and the country where the finished product will be sold.

A quotation that leaves out the hydrate state or the market is incomplete. The same CAS number covers an anhydrous salt at about 24% iron and a hydrate at about 19%, and the two are not interchangeable in a fill calculation. Commercial terms are stated on the quotation, not on this page.

The sample is a lot, not a demonstration

The 1 kg pack is the qualification sample. Test iron, ferrous iron, loss on drying, mesh and microbiology before scaling up, and retain a portion of that same pack. The lot code should run through the sample, the certificate and the quotation; a sample with no lot behind it is a demonstration, not a qualification.

If the project needs less for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, and it should be documented as such. Do not assume that a bench sample and the production drum come from the same lot.

Terms to settle before the first order

The quotation carries the commercial terms, the Incoterm, the pack, the lead time and the document list. The quality terms belong alongside: which specification revision applies, a COA for each lot, the retained sample, the retest period and the route for a change. Settle these in a quality agreement before the first production order, not after it.

Returns and replacements follow the quotation and the quality agreement. A lot that fails the agreed specification is handled through the retained sample and a joint re-test, not through a photograph of the powder. Ask who pays for the referee test and which laboratory both sides accept.

Pack sizes and the catalogue line sit on the product hub; the release tests are on the COA page; the destination file is on the compliance page; the MOQ entry defines the term, and the quality page covers release and retained samples.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation