06 Identity & adulteration

How we prove a phosphatidylserine lot is PS

Technical document 06 · Reviewed 2026-11-18 · Phosphatidylserine

On this page
  1. The four layers of identity
  2. What the HPLC-ELSD has to show
  3. PS as a share of the phospholipid sum
  4. The phospholipid and fatty-acid profile
  5. XRD on a phospholipid powder
  6. The routes that pass a PS assay
  7. How to write the identity specification
  8. Five questions for the supplier

A phosphatidylserine lot is identified in four layers: the documentary chain, the HPLC-ELSD chromatogram, the phospholipid and fatty-acid profile, and the matrix mass balance with its oxidation figures. A 50% assay alone cannot separate PS from soy lecithin, another phospholipid or a diluted powder. Identity is the four layers agreeing.

In one line

A 50% assay is a number, not an identity; the chromatogram, the phospholipid profile and the oxidation figures have to agree.

The four layers of identity

What each identity layer proves, and what it does not
LayerEvidenceWhat it provesWhat it does not prove
DocumentaryCOA, lot code, source statement, specificationThe pack is the lot in the fileThat the chemistry matches the file
ChromatographicHPLC-ELSD retention time, standard, peak areaThe peak is phosphatidylserine and the content is as reportedThe other phospholipids or the source
CompositionalPhospholipid profile, fatty acids, sterolsThe material is a PS concentrate from the named sourceThe carrier or the oxidation state
MatrixLoss on drying, carrier, mass balance, peroxide and acid valuesThe powder is the grade that was ordered and is not degradedThe identity of the PS on its own

A certificate can describe a different lot; a chromatogram can hide the other phospholipids; a correct peak can sit in a powder whose carrier is undeclared. Identity is the four layers agreeing. The COA page explains the certificate lines.

What the HPLC-ELSD has to show

PS has no useful ultraviolet chromophore, so the standard method is HPLC with evaporative light-scattering detection. The column separates PS, PE, PC, PI, PA and LPC, the detector measures the mass that reaches it, and the PS peak is assigned by retention time against a reference standard.

Three details decide whether the number is meaningful: the standard (declared purity, since a mixture makes the result uncertain), the separation (PS resolved from PE and PA, since an unresolved shoulder inflates the figure), and the integration of the species cluster.

The method shows that the peak is PS and how much the powder contains, not the source, the other phospholipids or the carrier.

PS as a share of the phospholipid sum

The class profile gives a set of percentages, and the useful ratio is PS divided by the sum of the six phospholipid classes. For a 50% grade the remainder is other phospholipids and carrier, so the share falls when lecithin is added: PS drops while PC and PE rise. The PC-to-PE ratio shifts with the lecithin source, and the lyso-PC share records hydrolysis.

Read together, the ratios make dilution visible even when the PS figure is inside 50.0–55.0%. A lot with PS at the floor and PC above its usual share is more likely a diluted concentrate than a low-yield batch, and the mass balance should show where the mass went.

The phospholipid and fatty-acid profile

The 50% grade contains PS at 50.0–55.0%; the balance is other phospholipids, mainly PC, PE, PI and PA, plus any carrier. The profile fingerprints the starting lecithin and the conversion.

The fatty acids add a second fingerprint: both sources are linoleic-rich, but soy carries a measurable linolenic fraction that sunflower carries only at trace level. The sterol pattern adds a third and survives the conversion.

Peroxide and acid values describe the oxidation state. They do not prove identity, but an oxidised lot is not the same commercial material: peroxide value ≤10 meq/kg, acid value reported, and loss on drying ≤5.0% closes the mass balance. The stability page explains how those figures move in storage.

XRD on a phospholipid powder

Phosphatidylserine has no long-range crystal order: it is a glycerol backbone with two fatty-acid chains and a polar head group, and a commercial concentrate is a waxy solid or a carrier-borne powder. A diffraction scan returns a broad halo, and a mixture of PS, PC and PE returns the same halo. The method cannot identify the class, measure the PS share or tell soy from sunflower.

A sharp reflection would mean a crystalline addition — lactose, a mineral carrier or a crystalline salt — which is worth knowing, but its absence says nothing about the phospholipid. Identity comes from HPLC-ELSD with a class profile, fatty-acid and sterol fingerprints, and the mass balance. XRD is not part of that set.

The routes that pass a PS assay

Adulteration routes for phosphatidylserine and the test that catches each
RouteWhat still passesWhat catches it
Soy lecithin addedA PS result near the bottom of the rangePhospholipid profile, fatty acids, sterols, mass balance
Other phospholipids addedTotal phospholipid figure or a broad assayClass profile by HPLC-ELSD
Lower PS content sold as 50%Appearance and a nominal grade namePS result, mass balance, carrier ratio
Carrier over-additionPS inside 50.0–55.0% with carrier not declaredMass balance, loss on drying, carrier declaration
Sunflower sold as soy, or the reverseThe same PS percentageFatty acids, sterols, allergen and source file
Oxidised or reworked materialThe PS assayPeroxide value, acid value, colour, odour

Each route satisfies the headline number. Added soy lecithin lowers the PS percentage and raises PC and PE; an assay that integrates the whole phospholipid region as PS misses the dilution. A carrier can hold the powder weight while PS per gram falls.

The defence is to specify the number and the evidence together: PS result, class profile, fatty-acid and sterol fingerprints, peroxide and acid values, loss on drying and a closing mass balance.

How to write the identity specification

Write the full name, source and grade: “Phosphatidylserine (soy-derived), 50% powder.” Then the analytical lines: “PS 50.0–55.0% by HPLC-ELSD against a PS reference standard; phospholipid profile (PS, PC, PE, PI, PA, LPC); fatty-acid profile; peroxide value ≤10 meq/kg; acid value reported; loss on drying ≤5.0%; ≥95% through 80 mesh; carrier declared if present; allergen: soy.”

Add the negative statement: “No added lecithin; no undeclared carrier”, paired with the test that catches it — the class profile and sterol pattern for lecithin, the mass balance for an undeclared carrier. State whether the PS result is as-is or dried.

The grade page explains what changes when the PS percentage changes; the compliance page covers the source and allergen declarations. The separation is described in the HPLC method note.

Five questions for the supplier

  1. Which PS result belongs to this lot, and what method, column, detector and standard produced it?
  2. What is the full phospholipid profile, and the fatty-acid and sterol profiles?
  3. What are the peroxide value and acid value on this lot, by which methods, and the loss on drying?
  4. Is the source soy or sunflower, and what is the allergen and soy protein statement?
  5. What is the mass balance, is any carrier present, and was lecithin added?

Five answers amount to an identity file. The phosphatidylserine hub carries the catalog specification, and the quality page explains how the evidence is retained.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation