Phosphatidylserine is a lipid; oxidation and moisture decide the shelf life
Phosphatidylserine is a phospholipid with unsaturated fatty acids, so its shelf life is a contest between oxidation and moisture rather than a fixed number of months. Peroxide value is the earliest signal; the PS assay can stay inside its range while the lipid deteriorates. The catalog limits are peroxide value ≤10 meq/kg and loss on drying ≤5.0%, and a shelf life has to be demonstrated on the grade and the pack.
The PS assay can hold while the peroxide value climbs, so shelf life is set by the lipid's oxidation and moisture, not by the assay alone.
The dry powder
Sealed in a foil pouch or a lined drum at a cool temperature, the powder is stable enough for commercial handling. The weak point is the seal. PS is hygroscopic, and once the liner is opened the room enters the pack: loss on drying rises, particles stick together and the free-flowing powder becomes a caked mass. Moisture also drives hydrolysis, which raises the acid value and releases free fatty acids.
Caking and flow are the visible effects; colour and odour are the chemical ones. A light yellow powder that turns darker or develops an off-note is showing oxidation that the PS assay may not reflect. Store the pack closed, away from light and heat, and bring it to room temperature before opening so condensation does not form on the powder. A desiccant is useful in humid climates; it is not a substitute for a sealed liner.
Temperature matters even in a closed pack. Reaction rates roughly double for every 10 °C, so a drum stored near a warm wall can age faster than the same drum in a cool store. The storage condition belongs in the specification and on the label, not only in the warehouse procedure.
In dispersion and in the formula
PS is dispersible in water, not soluble. In a stick or a drink mix it clouds the liquid, and in a beverage it will settle unless the formula is designed to keep it suspended. That is a formulation fact, not a defect: a clear drink is the wrong format for a phospholipid powder.
In a wet matrix the lipid is exposed to water, oxygen and often heat. High-shear mixing can whip air into the dispersion and raise the peroxide value; a nitrogen blanket or a deaerated process reduces that exposure. Metal ions, particularly iron and copper, catalyse lipid oxidation at trace levels, so the water and the other ingredients should be checked as well as the PS powder. An acidic or alkaline pH accelerates hydrolysis of the phospholipid; a neutral, cool, low-water-activity matrix is the easier environment.
Antioxidants can slow the change but do not reverse it. Mixed tocopherols or ascorbyl palmitate are common choices in lipid formulas; the antioxidant has to be declared, and it has to be shown to work in the real matrix rather than assumed from another product. Adding an antioxidant to an already oxidised lot does not restore the peroxide value.
What actually moves the result
| Factor | Effect | Control |
|---|---|---|
| Oxygen | Peroxide value rises; off-notes develop | Sealed pack, nitrogen headspace, low-shear handling |
| Moisture | Caking, hydrolysis, acid value rises | Foil laminate, sealed liner, desiccant, dry room |
| Heat | Faster oxidation and hydrolysis | Cool store, cool process, short heat exposure |
| Light | Photo-oxidation, colour drift | Opaque pack, amber or foil secondary |
| Iron and copper | Trace-metal catalysis | Specification limits, equipment check, ingredient screen |
| pH and water activity | Hydrolysis in wet formulas | Neutral pH, low water activity, trial the matrix |
| Time | Slow change even in a good pack | Real-time data, retest or expiry date |
The stability protocol
The bulk study keeps the powder in its commercial pack at 25 °C/60% RH and at 40 °C/75% RH, with pulls at the start and then at 3, 6, 12 and 24 months. The warm leg is an accelerated condition, not a storage instruction; it exists to make a trend appear inside the study window. Test PS by HPLC-ELSD, peroxide value, acid value, loss on drying, appearance and microbiology at each pull, and add the phospholipid profile where the method allows it.
Peroxide value is the early indicator, but read it with care. Hydroperoxides are intermediate products: they rise, then decompose into aldehydes and other secondary products, so a peroxide value that falls late in the study can mean the lipid has moved past the hydroperoxide stage rather than recovered. Acid value, colour, odour and, where available, an anisidine value tell the rest of the story. A specification that tracks only PS and PV can miss the secondary change.
The finished-product study runs alongside, not instead. The capsule, tablet, stick or gummy goes into its own pack at 30 °C/65% RH and 40 °C/75% RH and is tested for PS, peroxide value, moisture, colour and taste where it applies. Bulk powder can pass while the finished product fails, and the finished product is what carries the date. The COA page lists the parameters that are followed over time.
Formulation and packaging
Capsules and tablets shield the powder from water and light; the remaining risks are the excipients and the process. A direct-compression blend with a hygroscopic carrier needs a dry room and controlled dwell time. A tablet coating adds a barrier but also adds heat, so the coating step belongs in the trial.
Sticks depend on the seal. A foil laminate with a continuous seam and a low moisture-vapour transmission rate is the baseline; a clear or paper format is a marketing choice that needs its own data. Nitrogen flushing the headspace is worth asking for on a lipid powder, and the pack should be rigid enough that the powder does not abrade the seam in transit.
Gummies and chews are governed by water activity, pH and heat. Add the PS powder at the coolest point that still disperses it, keep the water activity low, and check the peroxide value after the process rather than only on the raw material. In a drink mix, the powder is dispersed and consumed quickly, but the stick still needs a moisture barrier for its own shelf life.
How shelf life is assigned
A shelf life is a conclusion from data on the grade and the pack, not a property of the chemical name. The specification should state the storage condition and the retest or expiry period the study supports. Bulk material that will be re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read.
Where the pack or the matrix has not been studied, the defensible answer is a shorter period or a new study. A 24-month figure borrowed from another pack proves nothing about this pouch, drum, stick or gummy. Ask for the study behind the number, the conditions, the parameters and the lots covered; a shelf life without that file is a guess with a date on it.
The packs and the ordering unit are described on the MOQ page; the phosphatidylserine hub carries the catalog specification. The moisture test is defined in the loss-on-drying glossary entry, and the quality page explains how stability data and retained samples are held.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation