Fatty Acids & Lipids · Core range

Phosphatidylserine

C₄₂H₈₂NO₁₀P · CAS 51446-62-9 · Soy-derived phosphatidylserine 50% powder

Soy-derived phosphatidylserine specified at 50.0–55.0% by HPLC-ELSD, with peroxide value and acid value on the specification, for capsules and powder blends where the phospholipid profile matters.

Phosphatidylserine
50.0–55.0%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Phosphatidylserine50.0–55.0% (HPLC-ELSD)
AppearanceLight yellow to yellow powder
IdentificationHPLC-ELSD profile conforms
Loss on drying≤5.0%
Peroxide value≤10 meq/kg
Acid valueReported
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Particle size≥95% through 80 mesh
SourceSoybean lecithin
Chemical formulaC₄₂H₈₂NO₁₀P
CAS51446-62-9
Marker setPhosphatidylserine (50.0–55.0%, HPLC-ELSD)
AppearanceLight yellow to yellow, free-flowing powder
SolubilityDispersible in water; not a clear solution. Soluble in chloroform and other non-polar solvents.

Primary method HPLC-ELSD — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the source and the PS content: soy and sunflower PS are different label ingredients and different allergen declarations.
  • Ask for peroxide and acid values; an assay can pass while the lipid has oxidised.
  • Confirm the HPLC-ELSD method and the phospholipid profile, not only the PS percentage.
  • PS powder is hygroscopic and prone to oxidation; the pack and the storage temperature belong in the specification.

Buyer questions

Practical answers

What is Phosphatidylserine specified to?

Phosphatidylserine: 50.0–55.0% (HPLC-ELSD). The full specification adds Appearance, Identification, Loss on drying, Peroxide value, Acid value and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which form of Phosphatidylserine is this?

The catalog grade is Soy-derived phosphatidylserine 50% powder. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.

Which dosage forms does this grade fit?

Capsules and tablets, Powder sticks and drink mixes, Gummies and chews. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Phosphatidylserine is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.