06 Identity & adulteration

How we prove an L-lysine lot is the hydrochloride

Technical document 06 · Reviewed 2026-11-19 · L-Lysine Hydrochloride

On this page
  1. The four layers of identity
  2. Specific rotation: the L-form check
  3. Chloride, pH and the solid-state check
  4. The adulterants that fit the assay
  5. How to write the identity block
  6. Five questions for the supplier

Identity is proven in four layers: the document set, the molecular spectrum, the chiral rotation and the quantitative and impurity panel. For the hydrochloride, the chloride and pH are the salt evidence, and the rotation is the L evidence. No single line proves the material; the layers have to agree.

In one line

The IR spectrum names the amino acid, the rotation names the L form, and the chloride and pH name the salt; the certificate needs all three.

The four layers of identity

What each identity layer proves and misses
LayerTestWhat it provesWhat it misses
DocumentSpecification, COA, lot codeThe lot is described and traceableWhether the drum matches the paper
SpectrumIR and ninhydrinThe functional groups match an amino acidThe counter-ion and the enantiomer
ChiralitySpecific rotationThe L form and the optical purityThe salt and the exact content
Assay and impurityTitration, HPLC, chloride, pH, LOD, residue, metals, microThe content and what else is in the drumA close analogue at low level if the HPLC method cannot separate it

The assay layer has two views. Titration measures the acid–base content on the dried basis; HPLC separates lysine from other amino acids and reports its own figure. Compare the two on the same basis. A high titration with a low HPLC result can point to a titratable impurity that the chromatogram does not see; a low titration with a high HPLC result can point to water or a non-titratable diluent. An ordinary achiral HPLC method will not separate D-lysine from L-lysine, so it cannot replace the rotation.

Specific rotation: the L-form check

Specific rotation is the observed rotation divided by the path length and the concentration, corrected to the dried basis. The catalog range is +20.4° to +21.4°. The sign and the size of the figure carry the information: L-lysine hydrochloride rotates to the right, D-lysine rotates the other way, and a racemic DL mixture sits near zero. A lot that is cut with DL-lysine or D-lysine can keep a normal chloride figure and a normal titration, so the rotation is the line that catches it.

The number is method-dependent. Solvent, concentration, temperature, wavelength and path length all change the observed rotation, and the certificate should state them. A result reported without conditions is not comparable with a result from another laboratory. The dried-basis correction matters too, because the specific rotation is defined on the dried material; a wet sample read as-is gives a different figure.

Rotation is not a quantitative assay. A low result is a flag, not a measured D content, unless the method has been calibrated against known mixtures. A high result can come from another optically active amino acid, not from more lysine. Use the rotation with the chloride, the titration and the HPLC profile, and use a chiral HPLC method when the exact enantiomer ratio matters.

Chloride, pH and the solid-state check

The hydrochloride contains 19.41% chloride by mass, calculated from 35.45 g/mol of chloride and 182.65 g/mol of the salt. The catalog chloride range is 19.0–19.6%, which is consistent with the salt. The 5% solution sits at pH 5.0–6.0. Those two lines are the practical salt evidence: a base shows little or no chloride and an alkaline solution, while a chloride salt with the wrong cation can show a high chloride figure, a high residue or a different pH.

Salt evidence on an L-lysine hydrochloride certificate
TestWhat it showsReading
ChlorideThe hydrochloride counter-ion19.0–19.6%; theoretical 19.41%
pH (5% solution)Free acid or free base5.0–6.0
Residue on ignitionInorganic load≤0.1%
IRMolecular identityConforms to reference
XRDCrystal formNot a routine release test

XRD is not the routine identity test for this salt. The chloride and pH lines do the salt work, and IR does the molecular work. Reach for XRD when a supplier claims a specific crystal form, when a milled or granulated grade behaves differently from the reference, or when a dispute turns on the solid state. A clean XRD pattern does not replace the chromatogram or the rotation, and a missing pattern does not prove the material is not the salt.

The adulterants that fit the assay

Adulterants and the lines that catch them
AdulterantWhy it can pass a rough checkWhat catches it
L-lysine baseSame lysine entity; the titration can still read a lysine figureChloride low; pH alkaline; assay basis
D-lysine hydrochlorideSame formula, chloride and assaySpecific rotation; chiral HPLC
DL-lysine hydrochlorideSame formula, chloride and assay; the rotation is near zeroSpecific rotation; chiral HPLC
Other amino acidsSimilar acid–base behaviour and similar massHPLC amino-acid profile; IR; rotation
Sodium or ammonium chlorideRaises the chloride figure and the massChloride high; residue; pH; ammonium test
Sulfate or carbonate saltContains lysine but not the hydrochlorideChloride low; sulfate or carbonate test; residue
WaterThe dried-basis assay corrects it outLoss on drying; as-is assay

The base is a likely substitution because it is a legitimate lysine material with more lysine per gram. It fails on the salt lines, not on the lysine line. D- and DL-lysine are the chiral substitutions: they keep the formula and the chloride and fail the rotation. Other amino acids are caught by the chromatogram, and inorganic chlorides by the chloride, residue and pH lines together. None of these is caught by a single assay.

How to write the identity block

  • “L-lysine hydrochloride, CAS 657-27-2, C6H14N2O2·HCl, white crystalline powder.”
  • “Identification: IR spectrum conforms to the reference; ninhydrin reaction conforms.”
  • “Assay: 98.5–101.5% by titration on the dried basis, calculated as the hydrochloride; HPLC confirmatory result reported with column and detector.”
  • “Specific rotation: +20.4° to +21.4° on the dried basis, with solvent, concentration, temperature and wavelength stated.”
  • “Chloride: 19.0–19.6%; pH (5% solution): 5.0–6.0; loss on drying ≤0.5%; residue on ignition ≤0.1%.”
  • “Heavy metals: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; microbiology as specified.”
  • “Composition statement: no added L-lysine base, D-lysine, other amino acids or inorganic chloride.”

The composition statement turns the identity question into a specification. Sign it with the specification, not after a dispute. If the material is blended or granulated, name the other components and their amounts.

Five questions for the supplier

  1. Which IR reference and technique were used, and can you send the spectrum?
  2. Which assay is the release method, on what basis, and what does the HPLC report show?
  3. What are the specific rotation, chloride and pH results for this lot, with the method conditions?
  4. Is the material a single L-lysine hydrochloride, or does it contain the base, D-lysine, another amino acid or an inorganic chloride?
  5. Which lot code links the certificate, the pack and the retained sample?

Five answers should agree with the certificate and with each other. The product page carries the catalog specification; the COA page shows where each test sits; the grade page covers the form; the hydrochloride-versus-base page works through the label arithmetic; the HPLC note explains the separation; the retained-sample note covers the chain.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation