04 MOQ & ordering

L-Lysine HCl: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · L-Lysine Hydrochloride

On this page
  1. Why the minimum is 1 kg
  2. Packs and labelling
  3. Lead time and what moves it
  4. Six details a quotation needs
  5. Samples and retained samples
  6. Terms that belong in the purchase order

The minimum order for L-lysine hydrochloride is 1 kg, packed in a foil pouch; production volumes ship in 25 kg fiber drums. Catalog lead time is 1–7 days for a released lot. A quotation needs the form, the quantity, the pack, the mesh, the destination and the documents.

In one line

One kilogram drawn from a released lot is the qualification unit; the drum, the mesh and the destination shape the rest of the order.

Why the minimum is 1 kg

One kilogram is the qualification unit, not a retail pack. It is enough to run a bench trial, make a pilot batch, keep a retained sample and send a portion to an outside laboratory. It is also small enough to be drawn from a released lot, so the sample and the later drum can carry the same specification and the same test panel. The minimum is a quality decision before it is a commercial one.

A smaller scoop from a drum would not give the same traceability. A 1 kg pouch can be labelled with the lot code, sealed and retained; a repack from an unknown drum cannot. If the trial succeeds, the commercial order can move to the 25 kg drum with the same form, mesh and specification.

Packs and labelling

Catalog packs and formats for L-lysine hydrochloride
Pack or formatTypical useWhat to check
1 kg foil pouchTrial, sample, small batchSeal, liner, lot code, storage statement
25 kg fiber drumProductionInner liner, closure, net weight, transport integrity
40 mesh crystalline powderCapsule filling and blendingDistribution, flow, dust
80 mesh milled or granulatedFaster dispersion or lower dustSpecification line and lead time

The foil pouch is the moisture barrier; the drum is the handling unit. In both cases the liner is part of the pack, not a detail. Ask for a photo of the packed unit and the label before shipment if the material is going into a regulated file. The label should carry the product name, the form, the lot code, the net weight and the storage statement, and the certificate should carry the same lot code.

Lead time and what moves it

The catalog lead time is 1–7 days for a released lot. The clock starts when the form, the specification, the quantity and the documents are clear; a query about the assay basis or the chloride limit restarts it. A non-standard pack, an 80 mesh milled grade, a granulated grade or a destination that needs a specific certificate or statement adds time.

Lead time is not a promise about a future production lot. If the grade is not in stock, the schedule depends on the production run and the release testing, and that should be confirmed in the quotation rather than assumed from the catalog figure. The same applies to a label with a customer-specific lot code or a consignee mark.

Six details a quotation needs

What to send with a quotation request
#DetailWhy it changes the answer
1Form and CASL-lysine hydrochloride 657-27-2, not the base
2Quantity and pack1 kg pouch, 25 kg drum or a mixed schedule
3Mesh and granulation40 mesh catalog, 80 mesh or granulated on request
4Destination and delivery termSets the documents and the transport route
5Documents and testsCOA, statements, third-party report, sample retention
6Required dateSeparates a released lot from a production run

Add the specification version if you have one. A quotation against a different assay basis, a different mesh or a different chloride limit is not comparable with the one you are holding.

Samples and retained samples

A 1 kg order can serve as the sample. Ask for the lot code, the batch COA and the pack label with it, and keep a portion sealed as the retained sample. The sample should come from the same lot as the commercial pack, not from a separate “sample stock” with no traceability.

If the sample goes to an outside laboratory, record the lot code, the date and the tests requested. The laboratory's report and the supplier's certificate should describe the same material; if they do not, the lot code is the first thing to check. The retained sample should be kept under the same storage condition as the commercial pack, because a sample held in a drawer does not represent the drum.

Terms that belong in the purchase order

The quality terms should be in the purchase order, not only in the quotation: the specification version, the form, the mesh, the pack, the lot code on the certificate, the documents required with each shipment, the storage statement, the retest or shelf-life basis, and the procedure for a nonconforming lot. Delivery terms, payment terms and title are commercial terms and belong in the same document.

Agree what happens if a result is disputed: which retained sample is used, which laboratory is the referee, and who holds the sample. A clear term before the first drum is simpler than a dispute after it. The product page carries the catalog packs; the COA page shows the test lines; the compliance page lists the documents; the MOQ note defines the term; the lead-time note explains the clock.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation