Amino Acids · Core range
L-Lysine Hydrochloride
C₆H₁₄N₂O₂·HCl · CAS 657-27-2 · L-lysine hydrochloride, crystalline
L-lysine hydrochloride specified at 98.5–101.5% on the dried basis, for capsules and tablets where the salt form, the chloride and the water content have to be declared.
- Assay (dried basis)
- 98.5–101.5%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Assay (dried basis) | 98.5–101.5% (titration) |
|---|---|
| Appearance | White crystalline powder |
| Identification | IR and ninhydrin reaction conform |
| Specific rotation | +20.4° to +21.4° (dried basis) |
| Loss on drying | ≤0.5% |
| Residue on ignition | ≤0.1% |
| pH (5% solution) | 5.0–6.0 |
| Chloride | 19.0–19.6% |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₆H₁₄N₂O₂·HCl |
| CAS | 657-27-2 |
| Marker set | L-lysine hydrochloride (98.5–101.5%, dried basis) |
| Appearance | White crystalline powder |
| Solubility | Freely soluble in water; the 5% solution is slightly acidic (pH 5.0–6.0). |
Primary method Titration and HPLC — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for L-Lysine Hydrochloride. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Name the form: L-lysine hydrochloride and L-lysine base are different label ingredients and different doses.
- The chloride figure is an identity check for the hydrochloride; an assay alone does not prove the salt.
- Ask for the specific rotation and the assay basis; the rotation is the identity check for the L form.
- Confirm the water content and the particle size for capsule fill and blend uniformity.
Buyer questions
Practical answers
What is L-Lysine Hydrochloride specified to?
Assay (dried basis): 98.5–101.5% (titration). The full specification adds Appearance, Identification, Specific rotation, Loss on drying, Residue on ignition and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of L-Lysine Hydrochloride is this?
The catalog grade is L-lysine hydrochloride, crystalline. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Capsules and tablets, Powder sticks and drink mixes. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
L-Lysine Hydrochloride is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.