How we prove a riboflavin lot is riboflavin
Riboflavin identity is established in four layers: the documentary identity of name, CAS number and formula; the spectroscopic identity from IR and UV; the chromatographic assay against a riboflavin reference standard; and the physical description of a yellow to orange-yellow crystal with yellow-green fluorescence. No single layer proves the lot; the layers have to agree. Adulteration usually shows up as a disagreement between them.
A 99% assay is not an identity; the spectrum, the retention time and the colour have to describe the same molecule.
The four layers of identity
The layers answer different questions. The documentary layer says what the lot is called. The spectroscopic layer says which functional groups and chromophore are present. The chromatographic layer says the main peak behaves like riboflavin and that the assay is calculated against a riboflavin standard. The physical layer says the solid looks like the material in the specification.
| Layer | Test | What it establishes |
|---|---|---|
| Documentary | Name, CAS number, formula, specification | The identity the lot is traded under |
| Spectroscopic | IR fingerprint; UV maxima and absorbance ratios | The functional groups and the isoalloxazine chromophore |
| Chromatographic | HPLC retention, peak purity, assay against a standard | The main peak is riboflavin and the assay belongs to it |
| Physical | Colour, fluorescence, crystal form | The solid matches the description and the reference |
Identity is not purity. A lot can be 99% riboflavin and still be the wrong crystal form for a process, and a lot can be the right form and fail the assay. The specification carries both because a buyer needs both answers.
The ratios behind the numbers
Two ratios sit behind a riboflavin certificate. The first is the dried-basis ratio: the assay is corrected for water measured by loss on drying, so the as-is content is the dried-basis result multiplied by one minus the loss on drying. A certificate that reports an as-is assay without saying so, or a dried-basis assay without a loss-on-drying figure, leaves the reader unable to check the conversion.
The second is the phosphate ratio. Riboflavin is 376.37 g/mol; the anhydrous riboflavin 5'-phosphate sodium salt is 478.33 g/mol, and the dihydrate is 514.36 g/mol. One gram of the anhydrous salt therefore carries at most about 0.787 g of riboflavin, and one gram of the dihydrate about 0.732 g. The commercial salt is assayed as riboflavin on the dried basis at 73.0–79.0%, which is the same arithmetic seen from the certificate side. If a lot is labelled riboflavin but the certificate reports a phosphate content or a riboflavin figure near the middle of that window, the form has been misdescribed.
A third ratio belongs to the UV spectrum. The absorbance maxima near 267, 373 and 444 nm and the ratios between them are part of the identification; a dye can match the colour at one wavelength, but it rarely matches the whole curve.
What X-ray diffraction adds
X-ray powder diffraction reads the crystal lattice. A crystalline riboflavin lot gives a fingerprint pattern, and a different crystal form, a hydrate or a crystalline diluent adds or shifts peaks. That makes XRPD a useful third opinion when IR and assay agree but the powder behaves differently in a blend, or when a supplier claims a crystal form the certificate does not describe.
XRPD is not a purity assay. It sees crystalline material well and amorphous material poorly, and it does not quantify riboflavin. Use it beside HPLC: the pattern answers which solid this is, the chromatogram answers how much riboflavin is in it. Ask for the reference pattern and the detection limit; a “conforms” line without the pattern is a conclusion.
The adulteration routes that matter
Riboflavin is an intense yellow powder, and that colour is the adulterer's advantage. A blend of a cheaper yellow material with a filler can look right in a jar, and an assay can be made to look right if the method is not specific.
| Route | What it mimics | What separates it |
|---|---|---|
| Riboflavin 5'-phosphate sodium | The vitamin B2 name and the yellow colour | HPLC retention and phosphate content; the salt is freely soluble |
| Folic acid or another yellow vitamin | The colour and part of the UV curve | HPLC retention and the full UV spectrum |
| Yellow dyes such as tartrazine or sunset yellow | The colour of the powder or the solution | HPLC-DAD peak purity; the fluorescence is different |
| Lactose, starch or dextrose | The bulk and the flow of the powder | Assay, IR and XRPD; the dilution shows in the assay |
The first sign is often a certificate that reports an assay without an identity test. A specific HPLC method with peak purity, an IR spectrum and a UV curve make the dye and filler routes much harder. The phosphate route needs one more line: a method that separates the ester, or a phosphate assay, because a method that hydrolyses the phosphate before detection can report the salt as riboflavin.
Fermentation-derived and synthetic riboflavin are the same molecule. The difference is a supply-chain and labelling question, not an identity question, and an IR spectrum cannot tell the route.
Writing identity into the specification
A specification that says “vitamin B2 99%” has not described a material. Write the identity first, then the assay and physical lines: “Riboflavin, crystalline, CAS 83-88-5; yellow to orange-yellow crystalline powder; identification by IR and UV conforms; assay 98.0–102.0% by HPLC on the dried basis; loss on drying ≤1.5%; residue on ignition ≤0.3%; ≥95% through 80 mesh; heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as agreed; packed in a 1 kg foil pouch.”
The specification should say what the certificate must report: method, basis, reference standard and result. If the material is the phosphate salt, the specification changes to the salt's CAS number, its assay as riboflavin on the dried basis and its water content. One specification cannot cover both forms.
The catalog specification is on the product page; the identity lines are reported on the COA page; the two forms are compared on the grade page. The FTIR method note covers the IR side, and the HPLC method note covers the chromatographic side.
Five questions to ask a supplier
- Which form and CAS number are you quoting, and does the certificate name the same form?
- What is the assay method, the detection wavelength and the basis — as-is or dried?
- Can you send the IR and UV spectra and the HPLC chromatogram for the lot, not only the assay number?
- What are the loss on drying, residue on ignition and mesh, and how is the pack protected from light?
- Who manufactured the lot, and how does the lot code link the certificate, the pack and the retained sample?
The answers should agree with each other. A supplier who can answer the first four and not the fifth can still sell a good powder, but the file is incomplete; a supplier whose certificate names one form and whose spectrum names another has a problem no assay will fix.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation