Vitamin B2: MOQ, packaging and ordering
The catalog minimum is 1 kg, packed as a foil pouch; production quantities ship in 25 kg fiber drums. The 1 kg unit is drawn from a released lot and is large enough for identity testing, a bench trial and a first formula run. The catalog lead time for a released lot is 1–7 days, and the quotation is built from six details about the material, the pack and the destination.
One kilogram from a released lot is the qualification unit; the pack, the documents and the destination turn it into an order.
Why the minimum is one kilogram
The minimum is a commercial unit, not a retail pack. A kilogram is enough to identity-test the material, run a bench trial, check the blend behaviour and keep a retained sample, and it is small enough to be drawn from a single released lot. That last point is the reason for the number: a smaller split would either break the lot identity or leave no sample for the file.
Below 1 kg, the request is a laboratory sample rather than a catalog line. Ask with the tests you intend to run and the quantity the trial needs; the answer depends on the lot and the document set, and it is handled as a separate request. Above 1 kg, the same material is available in the 25 kg drum, and the drum is the production unit.
The minimum is not a barrier to qualification: a brand can test the material and run a trial batch without committing to a drum. The 1 kg pouch and the 25 kg drum carry the same specification; the difference is the pack and the handling.
Packs and what they protect
Riboflavin is light-sensitive and takes up moisture, so the pack is part of the specification. The foil pouch is opaque and moisture-resistant; the fiber drum is rigid enough to protect the powder in transit.
| Pack | Typical use | What it protects |
|---|---|---|
| 1 kg foil pouch | Sample, bench trial, small batch | Light and moisture; single-lot traceability |
| 25 kg fiber drum | Production batch | Light, moisture and handling in transit |
Keep the pack closed between uses and do not transfer the powder into a clear jar. A clear container gives up the light protection that the foil was chosen for, and an open drum gives up the moisture protection. If the material is repacked, the new pack needs its own specification and its own stability data.
Every pack carries the product name, form, net mass, lot code and storage statement. The lot code links the pack, the certificate and the retained sample; if the three do not match, the paperwork describes a different material.
Lead time and what can move it
The catalog lead time is 1–7 days for a released lot. The range covers the difference between a pack that is already on the shelf and one that has to be drawn, labelled and documented; it is not a promise for every destination. A new pack size, a customer-specific test panel, a certificate legalisation or a destination with import formalities can add time, and those should be discussed before the order is confirmed.
Lead time is counted from order confirmation and document approval, not from the first email. If label artwork or the specification has to be approved, that belongs in the schedule. Ask for the ship date and the document date separately; a lot can ship before the certificate is issued, and that gap matters at the border.
The six details a quotation needs
A quotation is only comparable when it is built on the same six details. Send them together, and the reply can be checked against another supplier line by line.
| Detail | What to state | Why it matters |
|---|---|---|
| Form and specification | Riboflavin or riboflavin 5'-phosphate sodium, mesh, any customer test | Different material, different CAS number and different assay basis |
| Quantity and pack | Total quantity, 1 kg pouch or 25 kg drum, pack split | Sets the lot, the packing and the handling |
| Destination and terms | Country, city, Incoterm, consignee | Sets the route and the documents |
| Label and artwork | Language, net mass, lot format, any customer label | A label change can change the packing step |
| Documents and testing | COA, SDS, allergen statement, third-party test, certificates | Defines the file that ships with the lot |
| Sample or commercial | Trial quantity or production order, required date | Separates a sample request from a stock allocation |
Do not send a quantity alone. “One drum of vitamin B2” can mean either form, either mesh and either document set, and the reply will be a guess. The six lines above turn the enquiry into a quotation that can be compared.
Samples and qualification
A 1 kg pouch can serve as the sample for a qualification programme. Test identity by IR and UV, assay by HPLC on the dried basis, loss on drying, residue, mesh, colour and fluorescence; then run the material in the intended blend or solution and check the colour and the uniformity. Keep a retained sample from the same pouch and record the lot code.
A sample is not a shelf-life study. The pouch is a pack, but one pouch kept on a bench does not answer the question for a pallet in a warehouse. If the sample is used to choose a supplier, ask for the stability data on the production pack as well.
When the trial ends, compare the sample's certificate with the production lot's. The specification should be the same revision, and the lot code should be the one sampled; a sample from one lot and a shipment from another are two qualifications.
Terms that belong in the order
The purchase order should reference the specification revision and the pack, not only the product name. It should state the quantity, the lot code or the lot allocation, the documents that ship with the lot, the Incoterm and the delivery address. If the order is for a customer-specific label, the approved artwork belongs in the file.
Payment terms, delivery terms and the document set are stated in the quotation and confirmed in the order. Retention of the lot record and the retained sample should be agreed at the same time; a sample that is discarded after shipment cannot settle a later dispute. Any deviation from the specification should be written and accepted before shipment, not discovered on arrival.
The product page lists the catalog packs and lead time; the COA page shows what ships with the lot; the compliance page lists the documents a market may ask for. The logistics page covers the shipping side, and the quality page covers release and retention.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation