05 Compliance

Where riboflavin is permitted, and what the file must show

Technical document 05 · Reviewed 2026-11-18 · Vitamin B2

On this page
  1. Three markets, four questions
  2. EU: permitted form, NRV and contaminants
  3. US: dietary ingredient, Supplement Facts and cGMP
  4. Contaminants: the ceiling and the specification
  5. Claims: the boundary
  6. The file a brand should hold
  7. Buyer checklist

Riboflavin is permitted as a vitamin source in food supplements in the EU, the US and the UK, and the phosphate sodium salt is permitted alongside it in the EU and UK lists. Permission is the first check, not the whole file: contaminant limits, labelling, the claim wording and the lot documents are separate checks. This page sets out what each market requires and what a supplier file must show; verify the current text before launch.

In one line

The permitted form, the contaminant ceiling, the label and the claim are four different checks, and each market answers them in its own instrument.

Three markets, four questions

All three markets allow riboflavin, but they organise the permission differently. The EU and UK work from a positive list of vitamin forms; the US works from the dietary-ingredient definition and the Supplement Facts label. In all three, the nutrient use and the colour use are separate permissions.

Vitamin B2 · the instrument behind each market
MarketForm listLabel basis
EUDirective 2002/46/EC, Annex IRegulation (EU) No 1169/2011; riboflavin NRV 1.4 mg
USDietary ingredient under DSHEA21 CFR 101.36 Supplement Facts; riboflavin DV 1.3 mg
UKFood Supplements Regulations 2003, Schedule 2Retained nutrition labelling; riboflavin NRV 1.4 mg

The UK position is retained EU law with its own amendments, and the GB claims register is separate from the EU register. Northern Ireland follows the EU rules under the Windsor Framework, so a UK launch needs the destination checked, not only the language. Both lists name the same two forms.

Riboflavin also has a colour-additive entry: E101 in the EU and 21 CFR 73.450 in the US. That entry is not the permission for the nutrient use in a supplement; relying on one entry for the other function mixes two rules.

EU: permitted form, NRV and contaminants

Annex I to Directive 2002/46/EC permits riboflavin and riboflavin 5'-phosphate sodium in food supplements. The nutrition declaration gives riboflavin as a percentage of the 1.4 mg nutrient reference value, and the ingredient list names the form used. The “food supplement” statement and the daily-portion advice are part of the framework.

Regulation (EU) No 1924/2006 governs claims: only a claim on the authorised list, used with its conditions, can appear on the pack. A disclaimer does not fix a claim that is not on the list, and the rule reaches implied claims in a brand name or graphic. Contaminants are governed by Regulation (EU) 2023/915, which sets maximum levels for lead, cadmium and mercury in food supplements but no harmonised arsenic maximum; national rules can fill that gap. Check the current consolidated text.

US: dietary ingredient, Supplement Facts and cGMP

In the US, riboflavin is a dietary ingredient. Supplement Facts declares the amount in mg and the percentage of the 1.3 mg Daily Value, and the source line names the form after “as”, for example “Riboflavin (as riboflavin 5'-phosphate sodium)”. The ingredient statement and the panel must describe the same material.

Supplements are made under the cGMP rule in 21 CFR 111, so supplier qualification, lot records and the certificate belong to that system. A structure/function claim needs the DSHEA disclaimer and must be truthful; a claim that the product diagnoses, mitigates or addresses a medical condition is outside that route. There is no single federal maximum-level table for these metals in supplements; cGMP and adulteration provisions apply, and state rules such as California's Proposition 65 can add a warning threshold.

Contaminants: the ceiling and the specification

The table puts the EU food-supplement maximum levels beside the catalog limits. The specification is the release gate; the regulation is the legal ceiling, and the batch COA is judged against the tighter figure.

Contaminant limits · EU food supplements and this specification
ParameterEU food supplement limit or ruleThis specification
Lead3.0 mg/kg≤3 mg/kg
Cadmium1.0 mg/kg≤1 mg/kg
Mercury0.10 mg/kg≤0.1 mg/kg
ArsenicNo harmonised EU maximum≤2 mg/kg
MicrobiologyFood safety obligations applyAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

The certificate should show results, not a copy of the limit column, with the method named and the sample representative of the packed lot. A “conforms” line without a result is a conclusion, not a measurement.

Claims: the boundary

The claim is the part of the file most likely to travel from a brochure into artwork without a check. For riboflavin, the only defensible route is the authorised claim list for the market, used with its conditions and wording. This page does not list claim wording, because the register is the source and it changes; a page that copies a claim becomes a second, stale source.

In the EU and UK, the claim must be authorised and must not be a claim about a medical condition. In the US, a structure/function claim needs the DSHEA disclaimer and must not cross into a claim about a medical condition. “Supports” and “maintains” are not free passes; the substance, the amount and the wording all have to fit the entry. A claim about a deficiency or a medical condition belongs to a different regulatory route.

The file a brand should hold

A supplier file is the set of documents that lets a brand answer a regulator, a retailer and a customer with the same evidence. The list below is the minimum; a market or customer can add to it.

Documents that should accompany a riboflavin lot
DocumentWhat it establishes
Specification, signed and revision-controlledThe agreed parameters, methods and limits
Batch COAThe results for the lot and its release against the specification
Safety data sheetHandling, storage and transport information
Allergen statementWhether any allergen is present or crosses from the process
GMO status statementThe status of the material and the process
Country of origin and manufacturerTraceability and the identity of the producer
Stability dataThe shelf life assigned to the pack and the storage condition
Packaging declarationFood-contact compliance for the pouch or drum

Certifications such as ISO 9001, FSSC 22000, halal or kosher count only if they are current and cover the site that made the lot. Ask for the scope, not the logo.

Buyer checklist

  1. The form on the label, certificate and specification is the same, it is on the market's permitted list, and the assay method, basis and batch result agree.
  2. The heavy-metal results are reported element by element against the specification and the market ceiling.
  3. The label declares the amount and the percentage of the NRV or DV, with the form named.
  4. Every claim is on the current authorised list, or carries the correct US structure/function disclaimer.
  5. The document set is complete, current and linked to the lot code.
  6. The current consolidated legal text has been checked for the destination, including the UK and Northern Ireland.

The catalog specification is on the product page. The certificate lines are explained on the COA page; the two forms are compared on the grade page. The market notes are in the EU, US and UK regulatory pages.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation