PABA grades: one free acid, and the request that is really an ester
The catalog PABA is a single chemical grade: free para-aminobenzoic acid at 99.0–101.0% by HPLC, milled to 40 mesh. There is no marker range to choose between, the way there is for a botanical extract. What varies between offers is purity, particle size and granulation, and the largest apparent “grade” choice is really a different material: the methyl, ethyl and octyl esters.
PABA is one chemical grade; the real fork is between the free acid and a different molecule, the ester that trades under the same family name.
Why there is one grade, not a range
PABA is a defined molecule with a single formula, C7H7NO2, a molecular weight of 137.14 and a melting range near 187–189 °C. A supplier can offer it at a tighter assay, at a finer or coarser mesh, or as a granulated powder, but none of those is a different composition. The grade conversation in this category is therefore about the finishing specification and the paperwork, not about a marker spectrum.
That matters because grade language borrowed from botanicals suggests more choice than exists. “99%” and “99.5%” are two gates on the same substance, and a buyer who pays for the tighter one should ask what the extra step actually controls: a recrystallisation removes colour and some related substances, while a sieving step changes only the particle profile.
The genuine fork is elsewhere. PABA is sold as the free acid and also as methyl, ethyl and octyl esters, and those are separate substances with their own CAS numbers. A quotation for “PABA” that does not name the acid is ambiguous, and the ambiguity is expensive when it reaches the label.
The materials that get called PABA
| Material | What it is | Typical use | What changes |
|---|---|---|---|
| Free acid, 40 mesh | White crystalline powder, 99.0–101.0% by HPLC | Capsules, tablets, powder blends | The catalog grade on this page |
| Free acid, granulated | Agglomerated powder, freer flowing, less dust | Blends and high-speed tableting | Particle profile and flow; the assay gate is unchanged |
| Methyl ester | C8H9NO2, CAS 619-45-4 | Chemical intermediate and specialty uses | Different CAS, different label, no acid proton |
| Ethyl ester | C9H11NO2, CAS 94-09-7 | Benzocaine, a substance with its own file | A different regulatory object, not a PABA grade |
| Octyl dimethyl PABA | C17H27NO2, CAS 21245-02-3 | Cosmetic ultraviolet filter | Also methylated on the amine: a different substance and file |
The last three rows are materials, not upgrades. Each has its own molecular weight, its own analytical reference and its own name on a document. A switch between them is a change control, not a grade substitution.
Solubility, acidity and handling
The free acid dissolves to about 4.7 g/L in water at 20 °C, which is why the catalog calls it slightly soluble. It dissolves readily in ethanol and in alkaline solutions, where the carboxyl group is deprotonated and the salt forms in situ. A formulator who needs a clear aqueous concentrate adds a base and accepts the pH that follows; the 1% suspension sits at pH 3.0–4.5 without one.
The powder is crystalline and free-flowing at 40 mesh, with a sieving specification of ≥95% through the sieve. It is light-sensitive, so the pack is a light barrier as well as a moisture barrier, and the storage condition belongs in the specification rather than in a note at the bottom of the certificate.
Dust and static are handling issues rather than quality issues. A granulated grade reduces both, and it also reduces segregation in a blend where the PABA is a small fraction against heavier excipients. Granulation is quoted on request because it is a separate finishing run, not a stock variant.
Dosage form and the label
A capsule or tablet takes the 40 mesh powder directly at most fill weights; granulation is a flow decision, not a necessity. A powder blend needs a carrier that does not add moisture and a mix order that keeps the PABA from segregating. A stick pack or a drink mix is harder, because the acid needs a base to dissolve and the resulting pH has to be acceptable in the finished drink.
PABA is not an established vitamin, so it has no nutrient reference value in the European Union and no Daily Value in the United States. The colloquial “vitamin B10” is trade shorthand, not a nutrient name that supports a percentage declaration. A label that carries a % NRV or % DV figure for PABA is describing a status the substance does not have.
The label therefore names the substance: para-aminobenzoic acid, or 4-aminobenzoic acid, with the quantity per portion. That name has to match the certificate, and it has to be the free acid if the free acid is what was bought. An ester name on the label is a different declaration, and the file that supports it is a different file.
What to write into the specification
- “para-Aminobenzoic acid, CAS 150-13-0, C7H7NO2.”
- “Assay 99.0–101.0% by HPLC, as received; state the basis on the certificate.”
- “Identification by infrared and by HPLC retention; both lines reported.”
- “Loss on drying ≤0.5%; pH of a 1% suspension 3.0–4.5.”
- “Particle size ≥95% through 40 mesh; granulated on request.”
- “Heavy metals and microbiology as listed; light-resistant pack and storage condition.”
When the free acid is the wrong purchase
An oil-phase cosmetic needs an ester, because the free acid does not partition into the oil and its acidity is unwelcome in that formula. A system that must sit near neutral pH needs an ester or a different buffer strategy. A market whose file names an ester is not served by a free-acid lot, however clean the certificate.
The reverse is just as important. An ester is not a substitute for the acid in a capsule or a blend, because the mass, the identity and the label all change. The product hub carries the catalog numbers; the COA page shows how each line is reported; the ester comparison takes the chemistry further; the infrared method note explains the spectrum that tells them apart. For contrast, the EU vitamin annexes describe a vitamin form such as niacinamide, and they do not describe PABA at all.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation