Vitamins & Cofactors · Core range
Niacinamide
C₆H₆N₂O · CAS 98-92-0 · Niacinamide, crystalline
Niacinamide specified at 99.0–101.0% by HPLC, with nicotinic acid controlled, for capsules, tablets and powder blends where the niacinamide form has to be distinguished from niacin.
- Assay
- 99.0–101.0%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Assay | 99.0–101.0% (HPLC) |
|---|---|
| Appearance | White crystalline powder |
| Identification | IR conforms |
| pH (10% solution) | 5.5–7.5 |
| Melting range | 128–131 °C |
| Loss on drying | ≤0.5% |
| Residue on ignition | ≤0.1% |
| Nicotinic acid | ≤10 ppm |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₆H₆N₂O |
| CAS | 98-92-0 |
| Marker set | Niacinamide (99.0–101.0%), nicotinic acid ≤10 ppm |
| Appearance | White crystalline powder |
| Solubility | Freely soluble in water; the 10% solution is close to neutral (pH 5.5–7.5). |
Primary method HPLC — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Niacinamide. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Niacinamide and niacin are not interchangeable: the flush, the label name and the dose differ.
- Ask for the nicotinic acid figure; it is the impurity that separates a clean niacinamide from a cheaper grade.
- Confirm the pH and the melting range; both are identity checks that an assay alone does not replace.
- Niacinamide is hygroscopic; the pack and the dose-room humidity belong in the specification.
Buyer questions
Practical answers
What is Niacinamide specified to?
Assay: 99.0–101.0% (HPLC). The full specification adds Appearance, Identification, pH (10% solution), Melting range, Loss on drying and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Which form of Niacinamide is this?
The catalog grade is Niacinamide, crystalline. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.
Which dosage forms does this grade fit?
Capsules and tablets, Powder sticks and drink mixes, Gummies and chews, Functional beverages. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Niacinamide is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.