PABA: MOQ, packaging and ordering
The PABA minimum is 1 kg, supplied as a light-resistant foil pouch, with a 25 kg fiber drum as the standard bulk pack. Lead time is 1–7 days for the catalog grade, and a granulated powder adds a finishing step to that window. A firm quotation needs six inputs: the material and its CAS number, the specification, the quantity and pack, the destination and trade term, the documents, and the market where the finished product will be sold.
The kilogram is the smallest unit that can be drawn from a released lot, sampled, tested and traced, so it is the smallest order we quote.
Why the minimum is 1 kg
The floor is set by traceability rather than by packing convenience. A manufacturer releases material in lots, and a lot carries one test record, one certificate and one retained sample. Filling a 1 kg pouch from that lot keeps the chain intact; filling a jar from a bench bin does not, because the jar has no lot behind it.
One kilogram also covers the work that comes before a drum: a bench batch, a small pilot run and usually a second identity test, all from a single lot number. If the trial succeeds, the order moves to the 25 kg pack on the same specification; if it fails, the buyer has used a kilogram rather than a pallet.
The 25 kg drum is the bulk unit and it reduces handling per kilogram, but it commits inventory and a longer storage period for a light-sensitive powder. The minimum is a pack decision, not a volume incentive, and a buyer who needs less than a kilogram is asking for a split rather than for the catalog pack.
Packs and what each one protects
| Pack | Net weight | Typical use | What to specify |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Light barrier, sealed seam, reseal after opening |
| Fiber drum | 25 kg | Production | Food-grade liner, closed lid, lot code on drum and liner |
| Granulated powder | 1 kg or 25 kg on request | Blends, tableting, dust control | Particle profile and flow, quoted separately |
A pack is a barrier, and for this material it is two barriers at once. The foil keeps the light out and the moisture out; the seam is the weak point on a pouch and the liner is the weak point in a drum. “25 kg fiber drum” alone says nothing about either, so the liner, the lid and the storage condition belong in the order, not in a conversation afterwards.
Granulation is a different specification, not a packing choice. It changes the flow, the dust and the bulk behaviour, and it can change the sieve result; the assay gate stays where it was. Say so at enquiry, because the finishing run sits inside the lead time.
Lead time and dispatch
The 1–7 day window starts when the order is complete, not when the first message arrives. It covers picking, document preparation, release checks and dispatch; it does not cover freight transit, customs clearance or the buyer's own quality release. A granulated grade or a non-standard pack adds time, and the quotation should state it as a separate line.
Ask for the dispatch date as well as the lead time. A 25 kg drum may move on a pallet and a 1 kg pouch may move as a parcel, and the trade term decides who books the freight and who clears the entry. The documents should travel with the lot rather than follow it a week later.
What a quotation needs
Six inputs make a quotation specific enough to compare:
- The material: para-aminobenzoic acid, CAS 150-13-0, not the family name alone.
- The specification: assay and basis, loss on drying, pH, metals, microbiology and mesh.
- The quantity and pack: kilograms, pouch or drum, standard or granulated.
- The destination and trade term, since both decide the documents and the freight.
- The document set: COA, technical data sheet, safety data sheet and any market statement.
- The intended use and market, because a cosmetic file and a supplement file are different documents.
A quotation without the intended use is incomplete. The same powder can be the right material for a cosmetic formula and the wrong one for a capsule, and the paperwork follows the use. Commercial terms are not published on this page; they are stated on the quotation.
The sample is a lot, not a demonstration
The 1 kg pouch is the qualification sample. Test identity, assay, loss on drying, pH and microbiology before scaling, and keep a retained portion from the same pack. The lot code on the sample, the certificate and the quotation should match, because a sample that cannot be traced to a lot is a demonstration rather than a qualification.
Store the sample in the dark as the label says. This is a light-sensitive powder, and a sample left on a windowsill for a month will not represent the drum it came from. If the project needs less than a kilogram for a bench trial, raise it before ordering: a split from a bulk lot is a repack with its own traceability and should be documented as one.
Terms to settle before the first order
The quotation sets the commercial terms, the pack, the lead time and the documents. The quality terms belong beside them: the specification revision, the certificate per lot, the retained sample, the retest period and the change-control route. A written quality agreement is worth having before the first production order rather than after the first disputed result.
Returns and replacements follow the quotation and that agreement. A lot that fails the agreed specification is handled through the retained sample and a joint re-test, not through a photograph of the powder. Agree in advance which laboratory is acceptable to both sides and who carries the referee test.
The product hub carries the catalog specification; the COA page lists the release tests; the MOQ glossary entry defines the term; the logistics page covers shipping and documents; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation