02.1 Niacinamide vs niacin

Niacinamide vs niacin: why the flush is a different product

Technical document 02.1 · Reviewed 2026-11-18 · Niacinamide

On this page
  1. One vitamin name, two molecules
  2. What the flush is
  3. Content, dose and niacin equivalents
  4. What the label and the file must say
  5. How the two are told apart
  6. When to choose which

Niacinamide and niacin are both declared as vitamin B3, but they are different molecules: the amide and the carboxylic acid. The difference that reaches the consumer is the flush. Immediate-release niacin can produce a prostaglandin-mediated vasodilation at supplement doses, while niacinamide does not carry the acid group that triggers that response. That makes them different label ingredients, different formulation choices and different products, not two names for one powder.

In one line

The flush is not a side note to the niacin decision; it is the reason niacinamide and niacin are separate label ingredients.

One vitamin name, two molecules

Niacinamide is pyridine-3-carboxamide, CAS 98-92-0, formula C6H6N2O. Niacin is pyridine-3-carboxylic acid, CAS 59-67-6, formula C6H5NO2. The difference is the group at the 3-position: an amide in one, a carboxylic acid in the other. That single functional-group change moves the melting range from 128–131 °C to 236–239 °C, changes the water solubility from freely soluble to about 18 g/L at 20 °C, and changes the pH of a solution from close to neutral to acidic.

Niacinamide and niacin · chemistry and handling
FeatureNiacinamideNiacin
CAS number98-92-059-67-6
Molecular formulaC6H6N2OC6H5NO2
Functional groupCarboxamideCarboxylic acid
Molecular weight122.12 g/mol123.11 g/mol
Melting range128–131 °C236–239 °C
Water solubilityFreely solubleAbout 18 g/L at 20 °C
pH in solution5.5–7.5 (10%)Acidic
Flush at supplement dosesNoYes, immediate-release

The two are not different grades of one material. They are different chemical substances with different CAS numbers, different specifications and different label names. A certificate that says “niacin” or “vitamin B3” without naming the form is not a specification for either one.

What the flush is

Immediate-release niacin activates the GPR109A receptor, also called HCAR2, and the response releases prostaglandin D2, which dilates the small vessels and produces the warmth, redness and tingling that consumers call the flush. It usually begins within about half an hour and fades over roughly an hour, and it is dose-dependent. It is a receptor-mediated response to the acid, not an impurity, an allergy or a sign that the material is off-specification.

Niacinamide lacks the carboxylic acid group that the receptor recognises, and at supplement doses it does not produce the same flush. That is the practical reason the two forms are separate products: a brand that wants a flush-free experience chooses niacinamide, and a brand that builds its proposition around the flush chooses niacin and labels it as niacin. The flush is a formulation and label fact on this page, not a benefit claim.

Content, dose and niacin equivalents

Both forms count toward the niacin equivalent, but they are not interchangeable by mass in a formula. The label declares niacin and names the form; a switch from one to the other changes the ingredient declaration and the formula mass even when the vitamin figure is unchanged. The molecular weights are close — 122.12 for niacinamide and 123.11 for niacin — but the handling, the solubility and the pH are not.

The safety evaluation assesses the forms differently as well. The EU Scientific Committee on Food set tolerable upper intake levels for supplemental intake of 10 mg/day for nicotinic acid and 900 mg/day for nicotinamide. Those are risk-assessment values, not harmonised maximum levels in the EU, and they do not make one form a substitute for the other on a label. They are a signal that the two materials have different dose conversations.

What the label and the file must say

In the EU, Annex II to Directive 2002/46/EC lists niacin as (a) nicotinic acid and (b) nicotinamide, and the label declares niacin as a percentage of the 16 mg NE nutrient reference value. In the US, the Supplement Facts panel declares niacin in mg NE and the source line names the form, for example “Niacin (as niacinamide)” or “Niacin (as nicotinic acid).” In the UK, the retained permitted-forms list and the GB claims register apply. In all three, the form on the certificate, the form in the ingredient list and the form in the specification have to match.

A label that says “niacin” without the form is ambiguous. It may be acceptable as the nutrient name in some layouts, but the ingredient list and the specification still have to identify the substance. If the brief says “vitamin B3” and the customer expects one form, resolve the form before the artwork is signed, not after the first batch.

How the two are told apart

HPLC separates niacinamide from nicotinic acid and gives the assay; IR shows the amide carbonyl in one and the carboxylic acid carbonyl in the other; pH separates the near-neutral amide solution from the acidic acid solution; and the melting range separates 128–131 °C from 236–239 °C. A single assay can be made to look right by blending, so the identity file needs at least two orthogonal tests, and the impurity file needs the nicotinic acid figure. The HPLC method note covers the separation, and the identity page sets out the four layers.

When to choose which

Choose niacinamide for a capsule, tablet, stick pack or beverage where the brief is a flush-free product and the formula can take a near-neutral, freely soluble powder. Choose niacin when the flush is part of the product proposition, the label names niacin as the acid, and the dose conversation is built around that form. Choose neither until the label question is settled if the brief says only “vitamin B3,” because the two forms are different ingredients with different consumer experiences.

The choice is not about vitamin activity. It is about which product the label describes. A flush-free brief and a niacin label are a contradiction; a niacin brief and a niacinamide certificate are a specification error. The niacinamide hub carries the catalog specification, the grade page covers the form comparison, and the compliance page covers the permitted-form and label rules.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation