Where niacinamide is permitted, and what the file must show
Niacinamide is a permitted niacin form for food supplements in the European Union and the United Kingdom, and a dietary ingredient in the United States. Permission attaches to the form and the category, not to the words “vitamin B3.” The file has to show the form on the label, the contaminant results against the destination limits, the nutrient declaration in the required unit, and claims that stay inside the authorised wording. Each market uses a different instrument, and the label is checked separately.
Permission attaches to nicotinamide as a listed niacin form; the contaminant result, the label and the claim are three separate files.
The four checks
The first check is the permitted identity: which substance, in which form, is allowed in the product category. The second is the contaminant limit, set on the product as sold. The third is the label: the ingredient has to be named in the form the market expects, and the niacin content has to be declared in the required unit. The fourth is the claim: it has its own authorisation and its own evidence.
The EU maintains a permitted-forms list and a separate contaminants regulation. The US regulates niacinamide as a dietary ingredient under DSHEA and sets the Supplement Facts panel by regulation. The UK applies retained lists, a UK nutrition reference value and the GB claims register. This page describes the framework as of this review (November 2026); the current text in each market decides.
European Union
Directive 2002/46/EC lists the vitamin and mineral substances that may be used in food supplements. Annex II lists niacin as (a) nicotinic acid and (b) nicotinamide, so niacinamide is a permitted form. The form on the label and on the certificate has to match; a label that says only “niacin” leaves the reader to guess which one is present.
For supplements, contaminant limits sit in Regulation (EU) 2023/915. At the point of sale, a supplement must stay within 3.0 mg/kg lead, 1.0 mg/kg cadmium and 0.10 mg/kg mercury. Arsenic is not harmonised at EU level, so a Member State may apply its own limit; set one in the specification and check the destination. National maximum levels differ, so compliance in one Member State does not travel across the Union.
Labelling follows Regulation (EU) No 1169/2011 and the supplement particulars in Directive 2002/46/EC. The label carries the word “food supplement,” the name of the vitamin, the amount per portion, the percentage of the nutrient reference value, a warning not to exceed the stated daily dose, a keep-out-of-reach warning and a statement that the product is not a substitute for a varied diet. The EU nutrient reference value for niacin is 16 mg NE, so the percentage is calculated against that figure.
United States
Niacinamide is used as a dietary ingredient under DSHEA. The file should state the ingredient basis — pre-1994 marketing, a GRAS conclusion or a new dietary ingredient notification — and hold the evidence.
21 CFR 101.36 sets the Supplement Facts layout. It declares niacin in milligrams of niacin equivalents and the percentage of the 16 mg NE Daily Value for adults and children four years and older. The source line names the form, for example “Niacin (as niacinamide),” and that name has to match the certificate. The cGMP rule in 21 CFR 111 requires identity testing of each component, so the buyer's own test on receipt is part of the file.
US federal law sets no lead maximum for dietary supplements. California's Proposition 65 sets exposure thresholds that many US buyers work to; the daily dose has to be modelled against them, and a mg/kg figure alone does not answer the question. Structure/function claims carry the DSHEA disclaimer and the 30-day FDA notification, and a disease claim is not available in this category.
The contaminant table
| Element | EU | US | UK |
|---|---|---|---|
| Lead (Pb) | 3.0 mg/kg | No federal maximum; state rules such as Prop 65 may apply | 3.0 mg/kg retained; check current law |
| Cadmium (Cd) | 1.0 mg/kg | No federal maximum specific to supplements | 1.0 mg/kg retained; check current law |
| Mercury (Hg) | 0.10 mg/kg | No federal maximum specific to supplements | 0.10 mg/kg retained; check current law |
| Arsenic (As) | Not harmonised; Member State rules may apply | No federal maximum specific to supplements | No harmonised limit; set in the specification |
The ingredient specification in this catalog carries its own limits: Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg on the powder. Those are material limits, not the product limit. The product limit applies to the supplement as sold, after dilution by excipients and division into doses; the two have to be checked together. The 2 mg/kg arsenic line is buyer-set, because the EU has no harmonised figure.
Labels and claims
Permission to use the ingredient is not permission to make a claim. In the EU, health claims are authorised by Regulation (EC) No 1924/2006 and listed in Regulation (EU) No 432/2012; only the authorised wording may be used. In the US, a structure/function statement is the brand's responsibility, must be substantiated, and carries the DSHEA disclaimer. In the UK, the GB register of nutrition and health claims lists the wording that may be used. A disease claim is not available in any of the three markets.
This site makes no health claim for niacinamide. It publishes the specification, methods and framework; the claim, if any, belongs to the brand and the market that authorises it. The form name is an ingredient declaration, not a claim.
The document pack
- Batch COA with assay, IR identification, pH, melting range, loss on drying, residue on ignition, nicotinic acid, metals and microbiology.
- Specification and technical data sheet naming the form, the CAS number and the assay basis.
- Safety data sheet with the 16 standard sections.
- Contaminant report against the destination limits, with an arsenic limit where one is set.
- Nutrition declaration worksheet showing the niacin contribution per portion and the % NRV or % DV.
- Label artwork with the supplement particulars, the form and the warning statements.
- Claim file showing the authorised wording or the structure/function substantiation.
- Allergen, GMO, origin and residual-solvent statements for the lot.
What to check before the first order
- Is nicotinamide on the permitted list for the destination market, in the product category?
- Do the contaminant results cover the destination limit at the daily dose, and is the product limit checked too?
- Does the label name the form and declare niacin in mg NE and % NRV or % DV?
- Is every claim authorised, or is it a structure/function statement with the disclaimer and notification?
- Is the document pack written for the destination market?
- For the UK, is the product for Great Britain or Northern Ireland, and which list applies?
The market notes expand the framework: EU regulatory notes, US regulatory notes and UK regulatory notes. The definitions of NRV and Daily Value are in the glossary, the permitted-form listing is explained in the Annex II note, the batch certificate is on the COA page, and the release workflow is on the quality page. The product itself is on the niacinamide hub.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation