02 Grade comparison

Niacinamide or niacin: choosing a vitamin B3 grade

Technical document 02 · Reviewed 2026-11-18 · Niacinamide

On this page
  1. Why the distinction matters
  2. The two forms side by side
  3. What the physical differences do
  4. Which dosage form fits which
  5. Writing the grade into the specification
  6. When niacinamide is the wrong choice

Niacinamide and niacin are both declared as vitamin B3, but they are different molecules with different CAS numbers, solubilities, melting ranges and label names. Niacinamide (CAS 98-92-0) is the amide; it is freely soluble in water, gives a solution at pH 5.5–7.5 and does not produce the niacin flush at supplement doses. Niacin (nicotinic acid, CAS 59-67-6) is the acid; it is sparingly soluble, acidic in solution and can produce a flush. The choice is settled by the dosage form and the label, not by the assay figure.

In one line

Niacinamide and niacin share a vitamin name, not a molecule; the form on the label, the solubility and the flush belong to different products.

Why the distinction matters

Vitamin B3 is a family name. The nutrient can be supplied as nicotinic acid or as nicotinamide, and the two are not interchangeable by name. In the EU, Annex II to Directive 2002/46/EC lists niacin as (a) nicotinic acid and (b) nicotinamide; in the US, the Supplement Facts line can read “Niacin (as niacinamide)”; in the UK, the retained permitted-forms list carries the same two forms. The form on the certificate, the form in the ingredient list and the form in the specification have to be the same material.

The difference reaches the formula as well. Niacinamide dissolves readily and leaves the pH close to neutral, which suits a stick pack or a beverage. Niacin dissolves poorly and acidifies the solution, which can be useful in an acidic matrix and awkward in a neutral one. The two also differ in melting range by more than 100 °C, so a blend or a substitution is visible in a melting test even when the assay is inside the window.

The two forms side by side

Niacinamide and niacin · identity and physical comparison
PropertyNiacinamideNiacin
CAS number98-92-059-67-6
Molecular formulaC6H6N2OC6H5NO2
Functional groupCarboxamideCarboxylic acid
Molecular weight122.12 g/mol123.11 g/mol
Melting range128–131 °C236–239 °C
Water solubilityFreely solubleSparingly soluble, about 18 g/L at 20 °C
pH in solution5.5–7.5 (10%)Acidic
Flush at supplement dosesNoYes, for immediate-release niacin
Typical label sourceNiacin (as niacinamide)Niacin (as nicotinic acid)

What the physical differences do

Solubility is the first practical difference. Niacinamide goes into water at roughly 1 g per mL and is also soluble in ethanol, so it fits a liquid or a stick pack without a solubilising step. Niacin is sparingly soluble in cold water; a formulator who needs a clear niacin beverage has to solve that, and a salt is a different ingredient on the label with its own pH, mineral load and permitted-form question.

The second difference is pH. A 10% niacinamide solution sits at 5.5–7.5, close enough to neutral for a matrix that cannot take acid. A niacin solution is acidic; that can be an advantage in an acidic drink and a problem in a gel, a protein matrix or a formula with an acid-sensitive component. The third is thermal behaviour: niacinamide melts at 128–131 °C, while niacin melts near 236–239 °C. A blend of the two usually melts over a range that belongs to neither pure material, which is why the melting test is an identity check and not only a purity check.

Taste follows the chemistry. Niacin is acidic and can taste sharp; niacinamide is less acidic but has its own bitter note. Neither taste is a reason to choose one form without a trial in the finished matrix, because the flavour system, the sweetener and the dose all change what the consumer tastes.

Which dosage form fits which

A dry capsule or tablet can carry either form; the choice then turns on the label and the flush, not on the process. A stick pack or a ready-to-drink beverage is easier with niacinamide because it dissolves without an acid or a salt. A gummy or a chew is a moisture-and-heat process, and niacinamide's solubility can help uniformity, but the water activity and the pH still have to be tested. A product that is built around the niacin flush is the one case where niacin is the intended material rather than the compromise.

The dosage form also decides the specification. A capsule blend needs a mesh and a bulk density that the filling machine can run; a beverage needs a solubility and a solution pH; a tablet needs a compression behaviour that the niacinamide crystal may not have on its own. The catalog for this product is therefore short: one crystalline powder, with a milled or granulated option on request. The form choice, not a grade ladder, is the real decision.

Writing the grade into the specification

A niacinamide specification names the molecule and the form: “Niacinamide, crystalline; CAS 98-92-0; assay 99.0–101.0% by HPLC on the dried basis.” It then adds the identity lines (IR conforms; pH 5.5–7.5 at 10%; melting 128–131 °C), the water and inorganic lines (loss on drying ≤0.5%; residue on ignition ≤0.1%), the impurity line (nicotinic acid ≤10 ppm), the metal and microbiological panel, and the mesh. A specification that says only “vitamin B3 99%” has left the form open, and the form is the part that changes the label.

A niacin specification cannot be copied from a niacinamide one. The assay method, the identity tests and the impurity panel are different, and the melting range is a different number. If a supplier offers one certificate that is said to cover both forms, ask which form was actually tested and which reference standard was used. The FTIR method note explains the amide and acid spectra behind that question.

When niacinamide is the wrong choice

Niacinamide is the wrong choice when the product proposition is the niacin flush itself. It is also wrong when the label or the brand owner insists on the word “niacin” without a form and the customer expects the acid; the ingredient declaration and the consumer expectation have to be resolved before the order. It is wrong when the formula needs an acidic ingredient and the form is being chosen for that acidity. And it is wrong when a low-assay powder is offered as niacinamide without an IR identity, a pH and a melting range: those three lines are what separate the amide from the acid.

The niacinamide hub carries the catalog specification; the niacinamide versus niacin page takes the flush and label question further; the COA page shows where the identity lines sit; the compliance page covers the permitted-form and label rules.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation