Inositol hexanicotinate, niacin or niacinamide: choosing the B3 form
Inositol hexanicotinate is one chemical grade — the hexa-ester of nicotinic acid and inositol — supplied as an 80 mesh powder or a granulated powder. The choice that changes the certificate, the label and the dose is not the mesh; it is whether the formula uses this ester, plain niacin (nicotinic acid) or niacinamide, because those are three different ingredients.
The grade question is which vitamin B3 molecule the formula and the label can carry, because the ester, the acid and the amide are three different ingredients.
Why the grade question is a molecule question
“Vitamin B3” is a family name. Inositol hexanicotinate, nicotinic acid and niacinamide all count as niacin sources in at least one market, but they are separate substances with separate CAS numbers and separate label names. A brief that asks for “niacin 100 mg” has chosen a nutrient figure, not a material.
The ester is not a diluted or buffered niacin. It is a molecule with six nicotinoyl groups on an inositol ring, and its specification, solubility and label name follow from that structure. The physical grades — 80 mesh powder and granulated powder — change how the powder runs, not what it is.
The three B3 materials side by side
| Property | Inositol hexanicotinate | Niacin (nicotinic acid) | Niacinamide |
|---|---|---|---|
| CAS number | 6556-11-2 | 59-67-6 | 98-92-0 |
| Molecular formula | C42H30N6O12 | C6H5NO2 | C6H6N2O |
| Molecular weight | 810.72 | 123.11 | 122.12 |
| Assay and method | 98.0–101.0% by HPLC | 99.0–101.0% by titration, dried basis | 99.0–101.0% by HPLC |
| Water solubility | Slightly soluble | Sparingly soluble | Freely soluble |
| Niacin figure | Up to 911 mg nicotinic acid per gram after hydrolysis | 1,000 mg per gram | The amide is declared as niacinamide |
| Label name | Inositol hexanicotinate | Niacin (nicotinic acid) | Niacinamide |
| Flush response | Chosen for a different release profile; the wording is a claims question | Immediate-release nicotinic acid is associated with flushing | Flushing is not reported at supplement doses |
Three columns are enough to show why the certificate cannot be shared. The assay methods differ, the solubility differs sharply, and the label names are not interchangeable. The niacin figure in the table is a calculated maximum for the ester, not a measured lot result.
The physical grades: 80 mesh and granulated
The catalog powder passes 95% through 80 mesh. That is a finishing specification: it affects flow, dust and content uniformity, and it can change when the mill or the sieve changes. A finer powder distributes better at a low dose per capsule; a granulated powder flows better on a high-speed press and produces less dust in the dispensing room.
The material is hygroscopic. That makes the pack part of the grade: a 1 kg foil pouch and a 25 kg fiber drum with a liner are moisture barriers, and an open container is not. The powder is slightly soluble in water and soluble in organic solvents, so it disperses rather than dissolves in an aqueous mix. Granulation on request changes the particle profile and may change the lead time; it does not change the assay or the label.
Matching the form to the dosage form
Capsules and tablets. The ester is the usual choice when the label names inositol hexanicotinate and the formula needs the solid. It is a white powder at 80 mesh, and a granulated grade helps when the press runs fast or the blend segregates.
Powder blends. The ester disperses in a dry blend without dissolving, which suits sachets and two-piece capsules. It is a poor fit for a clear drink: the solubility is low, and an aqueous system adds the hydrolysis risk described on the stability page.
Dose arithmetic. A formula that declares 100 mg of nicotinic acid needs 100 ÷ 0.911 = 109.8 mg of the ester. A formula that weighs 500 mg of the ester delivers at most 455.6 mg of nicotinic acid equivalent. The label should say which figure it is declaring, because the ester mass and the niacin mass are not the same number.
Combination products. The ester is not the acid, so it does not bring the acid's pH or its reaction with carbonate. That matters in a blend with alkaline minerals, though the ester can still hydrolyse in a wet matrix; the formulator checks the water activity rather than assuming the ester is inert.
What to write into the specification
- “Inositol hexanicotinate, CAS 6556-11-2, C42H30N6O12.”
- “Assay 98.0–101.0% by HPLC, with the basis stated.”
- “Identification by HPLC retention and IR spectrum.”
- “Loss on drying ≤1.0%; free nicotinic acid within the agreed limit.”
- “Particle size ≥95% through 80 mesh; heavy metals and microbiology as listed.”
- “Pack: 1 kg foil pouch or 25 kg fiber drum with liner; hygroscopic.”
- “Label name and destination market confirmed before the order.”
We supply the ester, not the acid or the amide. A switch between the three is a new specification, a new label and a new dose calculation, and it should be handled as a change control rather than a swap at the weighing bench. The product hub carries the catalog limits; the level-four comparison takes the ester-and-niacin question further; the niacin page and the niacinamide page carry the other two specifications; the HPLC method note covers the assay.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation