04 MOQ & ordering

Inositol hexanicotinate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-20 · Niacin Inositol Hexanicotinate

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

The minimum order for inositol hexanicotinate is 1 kg, packed in a foil pouch. Production quantities go into a 25 kg fiber drum. Dispatch is quoted at 1–7 days from confirmation, and a quotation is only comparable when it names the form, the assay basis, the pack, the destination and the documents.

In one line

One kilogram is the smallest pack that can be sampled, tested and traced as a lot, and it is also the pack that fits a bench trial.

Why the minimum is 1 kg

One kilogram carries a bench trial, a retained sample and an outside identity check. It also travels as a parcel, so a formulator can start work before the production plan is signed off. The pouch has its own lot code, which is what ties the trial results to the certificate.

A smaller order has to be taken from a larger lot. That repack adds a handling step and a new record, and the material can no longer be presented as the original pack. At the other end, the 25 kg drum cuts the handling per kilogram but locks up inventory and storage time. The minimum is set by the pack, not by a volume target.

Packs and formats

Standard inositol hexanicotinate packs
PackNet weightTypical useNotes
Foil pouch1 kgTrial, sample, small batchMoisture barrier; close it after use
Fiber drum25 kgProductionLiner and lot code on the drum
Granulated powderOn requestFlow and dust controlParticle profile changes; dispatch may move
DilutionOn requestLower assay per gramCarrier changes the label; new specification

The catalog grade is an 80 mesh powder, with at least 95% passing 80 mesh. Changing the mesh or adding a carrier creates a different specification; it is not a packing option. Tell us before the quotation if the press needs a coarser or freer powder, because the change can move the dispatch date as well as the sieve line.

The powder takes up water, so the pouch and the drum liner are working parts of the pack. A pouch that has been rolled closed is not sealed; the air inside it is still humid. If the remainder will sit for months, move it to a smaller dry container or finish it inside the stated in-use period.

Lead time and dispatch

Dispatch is quoted at 1–7 days from confirmation. The count starts when the order is confirmed and stops when the carrier takes the pack; transit, customs and the buyer's own release are outside it. A granulated grade, a dilution or a special pack needs its own line in the quotation and its own date.

Ask for the date the pack leaves, not just the range. A pouch usually travels as a parcel and a drum on a pallet, and the Incoterm decides who books the freight and who clears import. The certificate and the other lot papers should be in the same shipment as the goods.

What a quotation needs

A quotation can be compared when it carries six things:

  1. The material and its form. Inositol hexanicotinate, CAS 6556-11-2, with the ester written out rather than “niacin”.
  2. The release specification. Assay and basis, loss on drying, free nicotinic acid, mesh, heavy metals and microbiology.
  3. The quantity and the pack. 1 kg pouch, 25 kg drum, or a granulated variant.
  4. The destination and the trade term. The country, the port or address, and the Incoterm.
  5. The documents. COA, specification, SDS, allergen and GMO statements, and any market-specific declaration the importer needs.
  6. The use and the market. Supplement, food or another use, and the country where the finished product will be sold.

A quote that omits the destination or the form describes a range of possibilities, not a lot that can be bought. The same material can clear one market's file and fail another's, so the papers are part of what is being sold. The commercial terms sit on the quotation, not in this document.

The sample is a lot, not a demonstration

The kilogram is the unit that gets qualified. Run identity, assay, free nicotinic acid, moisture and microbiology on it before scale-up, and retain part of the same pack. The lot code should appear on the sample, the certificate and the quotation. Without that code, the material is a demonstration, not a qualified lot.

A trial needing less than a kilogram is a split. It comes out of a bulk lot, gets a handling record of its own and cannot be sold or described as the 1 kg pouch. Put the split request in writing and keep its code with the trial data. The bench sample and the production drum need not share a lot, even when both meet the specification.

Terms to settle before the first order

The quotation should put commercial and quality terms on one page: Incoterm, pack, dispatch window, specification revision, one COA per lot, the retained sample, the retest period and the change route. A quality agreement signed before the first production order is easier than one negotiated after a problem.

If a lot fails the agreed specification, the retained sample is re-tested against the named method. Photographs of the drum do not settle a dispute. The agreement should name the referee laboratory both sides accept and say which side carries its fee. Appearance alone is a poor basis for a return, especially for a hygroscopic ester.

The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers the storage conditions; the MOQ glossary entry defines the term; the logistics page covers shipping and documents.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation