05 Compliance

The regulatory file for inositol hexanicotinate

Technical document 05 · Reviewed 2026-11-20 · Niacin Inositol Hexanicotinate

On this page
  1. The four checks
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Labels and claims
  6. The document pack
  7. The checks before a shipment

Inositol hexanicotinate is an ester of nicotinic acid and inositol, CAS 6556-11-2. The specification describes the material; the regulatory file has to connect the form, the niacin figure, the dose, the contaminant results and the label to the destination. The buyer's regulatory team confirms that route for the market and the finished product, and this page lists the documents and checks that belong in the file.

In one line

The permitted-forms list names the ester, but the niacin figure, the dose and the label are separate checks that the buyer's regulatory team confirms for the destination.

The four checks

The first check is the identity: which substance, in which form, is being placed on the market. The second is the nutrition calculation: how much niacin the ester contributes per portion, and in which unit the market declares it. The third is the contaminant result against the limit for the product as sold. The fourth is the label and the claim, which have their own rules and cannot be inherited from the ingredient listing.

Each check can fail on its own: a lot can clear every metal limit and still carry the wrong form name, and a label can name the ester correctly while the niacin figure is calculated on the wrong basis.

European Union

Directive 2002/46/EC is the food-supplement instrument. Annex II lists the permitted niacin forms, and the list includes nicotinic acid, nicotinamide and inositol hexanicotinate (inositol hexaniacinate). The label has to name the form that was used. The buyer's regulatory team confirms that the entry covers the material and the product category for the destination, and records the confirmation in the file.

The European Food Safety Authority reviewed the ester as a niacin source in 2009. Its panel concluded that nicotinate from inositol hexanicotinate is bioavailable and a source of niacin, and it derived a use level of about 11 mg of the ester per day from the existing upper safe level for nicotinic acid of 10 mg/day. The panel noted that the release from the ester is slow and that the flush effect is not likely, but that the data supporting the absence of flushing were limited at the time. The derived level is far below the ester doses used in many finished products, so how a member state handles a higher dose is a question for the buyer's regulatory team, not something the certificate answers.

Regulation (EU) 2023/915 sets the contaminant limits that apply to food supplements at the point of sale: 3.0 mg/kg for lead, 1.0 mg/kg for cadmium and 0.10 mg/kg for mercury. Arsenic is not harmonised at EU level, so a member state may set its own figure. The labelling rules are in Regulation (EU) No 1169/2011, read with the supplement particulars in the Directive. Niacin's EU nutrient reference value is 16 mg NE, and the label percentage is calculated from that figure.

United States

In the US, inositol hexanicotinate is marketed as a dietary ingredient for supplements. The file should state the basis on which the ingredient is marketed and keep the evidence with it; the buyer's regulatory team confirms that the basis extends to the finished product.

21 CFR 101.36 sets the Supplement Facts panel. Niacin is declared in milligrams of niacin equivalents against the 16 mg NE Daily Value for adults and children four years and older, and the source line names the form. That name has to match the certificate. The cGMP rule in 21 CFR 111 requires identity testing of each component, so the buyer's own identity test on receipt is part of the file.

The US tolerable upper intake level for niacin is 35 mg/day, set on the flush response to nicotinic acid. Whether and how that level applies to the ester is a dose-review question; the certificate does not settle it. Federal law sets no lead maximum for dietary supplements, while California's Proposition 65 sets exposure thresholds that many buyers model against the daily dose.

Contaminants and limits

Heavy metals · catalog limit and market position, food supplements
ElementCatalog limit on the powderEU supplement limitUS federal position
Lead (Pb)≤3 mg/kg3.0 mg/kgNo federal maximum for supplements; state rules may apply
Cadmium (Cd)≤1 mg/kg1.0 mg/kgNo federal maximum specific to supplements
Mercury (Hg)≤0.1 mg/kg0.10 mg/kgNo federal maximum specific to supplements
Arsenic (As)≤2 mg/kgNot harmonised; member state rules may applyNo federal maximum specific to supplements

Material and product limits are different numbers. The table applies to the powder as shipped; the regulation applies to the supplement as sold, after dilution by excipients and division into doses. A high-dose single-ingredient capsule barely dilutes the powder, so the calculation has to be made and kept.

Labels and claims

An ingredient listing does not authorise a health claim. In the EU, health claims are governed by Regulation (EC) No 1924/2006 and the authorised wording sits in Regulation (EU) No 432/2012; only the authorised wording may be used. In the US, a structure/function statement is the brand's responsibility, needs substantiation and carries the DSHEA disclaimer. In the UK, the GB register lists the wording that may be used. No disease claim is available in any of the three markets. This site publishes the specification; it does not publish a health claim.

The flush is a label question, not a specification line. Immediate-release nicotinic acid is associated with flushing, while the ester releases nicotinic acid more slowly. Any label statement about that difference is a claim, not a measured property of the certificate, and it needs its own support and review for the destination. The form name alone is an ingredient declaration, not a claim.

The document pack

  • Batch COA with HPLC assay and basis, IR identity, loss on drying, free nicotinic acid where agreed, metals, microbiology and mesh.
  • Specification and technical data sheet naming the ester, the CAS number and the assay basis.
  • Safety data sheet with the standard sixteen sections.
  • Contaminant report against the destination limits, including the arsenic decision.
  • Nutrition declaration worksheet showing the niacin contribution per portion and the percentage of the NRV or Daily Value.
  • Statement of manufacture and country of origin, plus allergen, GMO and residual-solvent statements where required.

The checks before a shipment

  • The certificate names inositol hexanicotinate, CAS 6556-11-2, not “vitamin B3” or “niacin”.
  • The label ingredient line names the same form as the certificate.
  • The niacin figure per portion is calculated on a stated basis and checked against the NRV or Daily Value.
  • The contaminant results are compared with the product as sold, not only the powder.
  • The arsenic position is decided and documented for the destination.
  • The claim wording, including any flush statement, has been reviewed for the destination.
  • The warning texts required by the market are present and complete.
  • The buyer holds its own identity test on receipt.

The instruments are described on the EU regulatory page, the US regulatory page and the UK regulatory page. The release tests are on the COA page, the identity checks on the identity page, and the catalog limits on the product hub.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation