Beta-carotene grades: 10% CWD powder, oil dispersion and crystal
Beta-carotene is sold as a pure crystal and as diluted, encapsulated preparations. The catalog form is a 10% cold-water-dispersible powder specified at 10.0–11.0% by UV/Vis; 1% powders, oil dispersions and 96% crystals are different specifications with different carriers and labels. The grade decides how the carotenoid is weighed, how it disperses and how much colour one gram delivers.
The grade is the delivery system: the same carotenoid at 1%, 10% or 96% behaves differently in water, in oil and on the label.
Why beta-carotene is sold in several grades
Beta-carotene is a fat-soluble pigment with an intense colour and a low effective dose. The pure crystal is difficult to weigh accurately at milligram scale, does not disperse in water, and is exposed to air on every particle surface. A diluted, encapsulated powder solves the handling problem: the carotenoid is divided into fine particles, protected by a carrier and an antioxidant, and made wettable so that it disperses in cold water.
The dilution is not a cosmetic difference. It is a formulation that changes the physical behaviour, the colour strength and the label declaration. A buyer who orders “beta-carotene” without the grade has not said which of these materials is wanted.
The grades side by side
| Grade | Beta-carotene | Carrier | Water dispersion | Typical use |
|---|---|---|---|---|
| 1% CWD powder | About 1% | Starch or gum plus antioxidant | Yes | Colour at low dose; dry mixes |
| 10% CWD powder (catalog) | 10.0–11.0% | Declared carrier plus antioxidant | Yes | Capsules, sticks, beverages |
| 10% oil dispersion | About 10% | Vegetable oil | No | Softgel fill; oily foods |
| 96% crystal | ≥96% | None | No; oil-soluble | Oil-based systems; high concentration |
The percentages in the first column are the carotenoid content of the preparation, not its purity. The 10% and 1% rows describe dispersions; the 96% row describes the colouring matter. Only the 10% CWD powder is the catalog form on this page; the other rows are the market grades a buyer may be offered under the same generic name.
Colour, particle size and dispersion
The catalog powder is orange-red to red and free-flowing, with at least 95% passing 40 mesh. In cold water it wets and disperses to an orange, cloudy liquid. That cloud is the point: the carotenoid is present as fine particles in a carrier, not as a dissolved molecule. A clear beverage needs a different formulation, not a longer stir.
The pure crystal is a dark red to violet solid, practically insoluble in water and soluble in oils and organic solvents. It is crystalline and dense compared with a spray-dried powder, and it does not wet out in water without an emulsifier. An oil dispersion sits between the two: the carotenoid is already dissolved or suspended in oil, so it mixes into a fatty matrix but not into an aqueous one.
Colour strength follows the carotenoid content, not the weight of powder. One gram of the 10% powder carries roughly one-tenth of the colour of one gram of the 96% crystal, before any difference in isomer profile or carrier colour is considered. Formulators who switch grade without recalculating the colour load usually over-colour or under-colour the batch.
Dose arithmetic when you change grade
The arithmetic is simple and easy to get wrong. To deliver 10 mg of beta-carotene, the 10% powder needs about 91–100 mg, depending on whether the lot assays 11.0% or 10.0%. The 96% crystal needs about 10.4 mg. A 1% powder would need about 1 g, which is impractical in a small capsule but normal in a dry mix or a colour application.
The carrier mass matters in a capsule or a tablet. A 10 mg dose from the 10% powder brings about 90 mg of carrier and antioxidant with it, and that mass has to fit the fill weight and the excipient budget. In a stick pack or a beverage the carrier is less of a constraint; in a small capsule it can decide whether the dose is feasible at all.
Overage is a separate decision. Beta-carotene loses colour and assay during storage, and the overage is set from stability data for the finished formula, not from the certificate. Adding extra powder to cover an expected loss changes the label declaration, so the overage belongs in the specification and the label review together.
What to write into the specification
- “Beta-carotene 10% cold-water-dispersible powder, CAS 7235-40-7, C40H56.”
- “Assay 10.0–11.0% beta-carotene by UV/Vis; state the solvent, wavelength and basis.”
- “Identification by UV/Vis spectrum against a beta-carotene standard.”
- “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.”
- “Carrier and antioxidant declared by name on the certificate.”
- “Heavy metals and microbiology as listed; colour within the orange-red to red window.”
- “Destination market and intended use — colour or nutrient — confirmed before the order.”
A specification that names the grade, the carrier and the assay basis is a purchase specification. One that says only “beta-carotene powder” leaves the supplier free to choose the grade, and the first difference usually appears at the filling line.
When another grade is the right choice
The pure crystal is the right starting point for an oil-based softgel fill, a transparent oil colour or a system where the carrier mass is unwanted. It is not a drop-in for the 10% powder: it will not disperse in water, it needs an oil phase and an antioxidant, and the label no longer carries a carrier declaration.
The 10% CWD powder is the practical choice for capsules, stick packs, dry mixes and beverages where a uniform orange dispersion is wanted. It is the wrong choice for a clear drink, for a purely oily matrix, or for a formula that cannot accept the carrier mass or an allergen the carrier may bring.
Switching in either direction needs a new specification, a new dose calculation, a stability check in the matrix and a label review. The product hub carries the catalog specification; the level-four comparison takes the 10% versus crystal question further; the vitamin A page covers the provitamin A side; the methods library describes the assay; the quality page covers release.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation