Beta-carotene 10% CWD: stability, light and the pack
Beta-carotene 10% CWD is sensitive to oxygen, light and heat, and moisture accelerates the loss. The sealed foil pouch, a dry store and a cool temperature are what keep the colour and the assay; an open pouch, a clear container or a warm loading bay shortens the useful life. Shelf life is assigned from stability data for the exact pack and storage condition, not from the release certificate.
Beta-carotene fails by oxidation and fading; the pack has to exclude light, moisture and air, and the shelf life belongs to that pack.
The powder: oxygen, moisture and colour
The catalog sets loss on drying at ≤5.0%. That is a release gate, not a storage allowance. Once the foil pouch is opened, the powder can pick up moisture from the air; the carrier becomes sticky, the powder cakes, and the loss on drying rises. The assay on the powder as supplied falls with the moisture, even before any carotenoid is lost.
Oxygen is the more direct cause of fading. Beta-carotene is a long polyene chain with many sites for oxidation, and the reaction bleaches the colour. The antioxidant in the preparation slows the process but is consumed over time; a pouch with a large headspace and a loose fold has more oxygen available than a freshly heat-sealed one.
Light is the third driver. Beta-carotene absorbs strongly in the visible range, and the same absorption that makes it a colour makes it vulnerable to photodegradation. The powder should stay in its opaque or foil pack, or in a light-resistant container that closes properly. A clear jar on a bench is an exposure, however short.
Heat raises the rate of all three. Ambient warehouse temperatures are usually acceptable for a sealed pack; a hot loading bay, a car boot or a greenhouse is not. After cold storage, let the sealed pack equilibrate before opening so that condensation does not form on the powder.
The dispersion: the least stable format
The 10% powder disperses in water to an orange cloud, not a true solution. In that dispersion the carotenoid particles are exposed to water, dissolved oxygen, light and heat at the same time. A beverage process adds a pasteurisation or hot-fill step, and the heat load can fade the colour before the product reaches the shelf.
If a liquid is unavoidable, protect it from light, keep dissolved oxygen low, control the pH and validate the hold time before filling. A bulk-powder stability result does not transfer to a beverage: the matrix, the process and the pack each change the rate. The drink's shelf life has to be measured in the drink.
The same caution applies to a gel or a gummy. Water activity, pH and the cooking temperature all act on the carotenoid, and the colour can migrate or fade while the assay on the raw powder is still in specification.
What drives degradation
| Factor | What it does | Control |
|---|---|---|
| Oxygen | Oxidises the polyene chain; colour fades | Sealed pack; low headspace; antioxidant |
| Light | Photodegradation; colour and assay fall | Opaque or foil pack; dark store |
| Heat | Accelerates oxidation and isomerisation | Cool store; controlled process temperature |
| Moisture | Caking, carrier mobility, higher loss on drying | Sealed pouch; dry store; desiccant where needed |
| Metal ions | Catalyse oxidation, especially iron and copper | Avoid metal contact; use compatible equipment |
| Acid and pH | Isomerisation and colour shift in liquids | Validate the matrix pH; buffer if needed |
These factors are not independent. A warm, bright, humid store is worse than the sum of three separate effects, and a beverage in clear glass combines light and oxygen with any heat in the process. The useful question is not “is beta-carotene stable?” but “stable in which pack, at which condition, for how long?”
A stability protocol for the ingredient
A useful protocol states the pack, the storage condition, the time points and the tests. Long-term storage at 25 °C/60% relative humidity and intermediate storage at 30 °C/65% relative humidity cover the warehouse; accelerated storage at 40 °C/75% relative humidity stresses the pack. A light-exposure arm is essential for this material, because a dark incubator misses the failure mode that a shop window creates.
Test assay, loss on drying, appearance and colour, UV/Vis identity and microbiology at each point. Colour should be measured, not only described, so that a shift can be compared with the starting point. For a beverage, a stick pack or a gummy, repeat the work in the matrix and at the process temperature and pH.
Ask for the summary for the pack you will buy, not for a different pack from the same product family. A 1 kg pouch and a 25 kg drum have different headspace, different opening histories and different surface-to-volume ratios; the data belongs to the pack.
The finished formula changes the answer
A capsule or tablet has low water activity, but the shell and the excipients can still transfer moisture. Check loss on drying at release and after storage, and check the appearance of the fill. A stick pack depends on the seal and the foil; a pinhole is a failure, and the strip should be inspected, not only the powder.
A gummy combines heat, water and an acidic pH, and the carotenoid is dispersed in a gel that may be translucent. A beverage combines light, oxygen, pH and a heat step. In both, the ingredient's bulk stability is the starting point, not the answer. The formulator decides whether an overage is needed; that is a label and stability decision, and it does not repair a pack that lets oxygen in.
How the shelf life is set
We do not publish a single shelf-life number for beta-carotene 10% CWD, because the pack and the storage condition set it. The assigned retest period belongs on the specification and is supported by the stability file for that pack. A number without a pack, a condition and a test panel is not a shelf life; it is a claim.
After the retest period, re-assay the retained sample before extending use. Do not extend by assumption, and do not carry a bulk figure across to a repacked container. The product hub lists the standard packs; the COA page covers the release tests; the methods library describes the assay; the quality page describes the release workflow; the vitamin A page covers the nutrient conversion that the label may use.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation