What the COA for beta-carotene 10% CWD actually contains
The COA for a beta-carotene 10% CWD lot describes a preparation, not a pure pigment. It should carry the UV/Vis assay (10.0–11.0%), identity against a beta-carotene standard, loss on drying, the heavy-metal and microbiology panels, and the particle size. Two lines are easy to overlook and decide how the rest reads: the carrier, which is most of the powder, and the assay basis, which fixes what the percentage means. The limits below are the catalog specification; a lot certificate is the evidence for a particular pack.
The certificate has to separate the carotenoid from the powder: a 10.0–11.0% UV/Vis assay on the preparation, the carrier declared beside it, and the loss on drying that explains the rest of the mass.
What belongs on the page
Read a certificate as a lab report. Each row needs a parameter, a method, a release limit and a measured result. “Conforms” without a method is an assertion; a result without a limit cannot be judged.
For a dispersion, identity and carrier are both structural. Identity establishes the chromophore; the carrier explains the other nine-tenths of the powder, and with it the label, the allergen position and the cold-water behaviour.
| Parameter | Release limit | Method |
|---|---|---|
| Assay | 10.0–11.0% beta-carotene | UV/Vis against a beta-carotene standard |
| Identification | Spectrum matches the standard | UV/Vis; maxima in the 440–457 and 470–486 nm ranges |
| Appearance | Orange-red to red powder | Visual |
| Loss on drying | ≤5.0% | Gravimetric |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg | ICP-MS |
| Microbiology | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent | Plate count and absence tests |
| Particle size | ≥95% through 40 mesh | Sieve analysis |
| Carrier and antioxidant | Declared by name | Supplier declaration |
Assay comes first because it is the number buyers compare. Identity comes second because an assay without identity could be measuring the wrong carotenoid. Carrier comes last because it is the line most often missing.
What the percentage is a percentage of
Ten to eleven per cent means grams of beta-carotene per 100 g of powder. It is not a purity figure. A 100 mg scoop carries 10–11 mg of the carotenoid; a gram carries 100–110 mg. A 96% crystal carries 960 mg/g, so the two percentages describe different articles and cannot be lined up as if they were concentrations of the same material.
The certificate also has to name the basis. Is the result on the powder as supplied, or corrected for moisture? With loss on drying at 5.0%, a lot at 10.0% as supplied calculates to about 10.5% on the dried basis. A specification written on one basis cannot be checked against a certificate written on the other.
The measurement has its own variables: solvent, wavelength and standard. Beta-carotene has maxima in the 440–457 nm and 470–486 nm ranges. A degraded standard or the wrong solvent shifts the result with no change in the powder. Ask for the method and the standard's assigned value, not only the percentage.
Limit, result and the space between
A limit is a gate; a result is a measurement. A result column that repeats the range tells the reader nothing about the lot. Each row should carry a number, and the number should be traceable to a method.
| Parameter | Release limit | Result column |
|---|---|---|
| Assay | 10.0–11.0% | A measured percentage, with solvent and basis |
| Identification | Spectrum matches | The maxima, or the spectrum attached to the report |
| Loss on drying | ≤5.0% | A measured percentage |
| Heavy metals | Per element | mg/kg for lead, arsenic, cadmium and mercury separately |
| Microbiology | Counts and absence | The count plus the absence statement |
| Particle size | ≥95% through 40 mesh | The measured percentage through the sieve |
| Carrier | Declared | Name and percentage |
Microbiology needs two pieces of evidence: a count and an absence statement. Heavy metals need one figure per element; a single total hides the one that is high. Identity needs a spectrum; a retention time alone is half a result.
Why two lots of the same grade differ
The spray dryer, the carrier lot and the mill move the assay, the colour, the moisture and the particle size. Encapsulation efficiency matters as well: carotenoid sitting at the particle surface is exposed to oxygen and fades before the total assay falls.
Colour is a wide window. Orange-red to red tolerates a shift, and a duller cast is not automatically an identity failure. It can mean oxidation, a different carrier or a long hold at temperature. Compare the retained sample rather than a photograph.
Isomerisation is the quiet variable. Heat, light and acid convert all-trans beta-carotene to cis forms, which absorb differently and colour less strongly. The total assay can stay in range while the colour performance drops. For colour-critical work, ask for the HPLC profile beside the UV/Vis assay.
Read trends, not single points: assay drifting down, moisture creeping up, a new peak in the chromatogram. The lot code should run through the certificate, the pouch, the drum and the retained sample.
When an outside laboratory earns its fee
Use an independent laboratory for a new source, a first shipment to a regulated market, a disputed result, or a claim the supplier's paperwork cannot support. The panel is UV/Vis identity and assay with a certified standard, HPLC carotenoid profile, loss on drying, ICP-MS metals, microbiology and a solvent-residue screen.
If the label names the carrier, add a carrier identity check. If it says natural or synthetic, add a source audit: the assay cannot tell the two apart because the molecule is the same. Origin is a documentary claim, not an analytical result.
Insist on detection limits. “Not detected” without a limit describes the method, not the lot. Keep the tested sample as the retained sample, and put the lot code on the report.
How to read two quotations side by side
Compare the grade and CAS number; the assay and its basis; the carrier and antioxidant; the colour window; moisture and particle size; metals, microbiology and pack. Agreement on 10% is not agreement on the material if the carriers differ.
Then check traceability: the manufacturing site, the carrier source, the antioxidant, and a lot code that runs through the pack and the retained sample. The catalog specification is on the beta-carotene product page. The difference between this dispersion and the crystal is set out on the grades page. Analytical methods are in the methods library, release practice is on the quality page, and the provitamin A conversion is on the vitamin A page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation