02.1 AKG acid vs calcium AKG

AKG acid vs calcium AKG: the salt, the calcium figure and the label

Technical document 02.1 · Reviewed 2026-11-19 · Alpha-Ketoglutarate

On this page
  1. Two identities, not two strengths
  2. The calcium figure
  3. Dose arithmetic between the forms
  4. The declaration follows the form
  5. The acid and the salt in water
  6. Choosing between them

α-Ketoglutaric acid (CAS 328-50-7, C5H6O5, 146.10) and calcium α-ketoglutarate (CAS 71686-01-6, C5H4CaO5, 184.16) are one keto acid in two forms: the free acid and its calcium salt. One calcium ion replaces both acid protons, so the calcium salt carries about 21.8% calcium by mass and one gram is about 0.793 g of acid equivalent. The form on the certificate, the label and the market file has to be one form.

In one line

Between the acid and its calcium salt sits one calcium ion, about 38 mass units, roughly 21.8% calcium and a different label name.

Two identities, not two strengths

α-Ketoglutaric acid is a dicarboxylic acid: two carboxyl groups on a five-carbon chain with a ketone at the 2-position. In the calcium salt, one calcium ion takes the place of both acid protons: two hydrogens leave the formula and one calcium joins it. That is a small structural change with a large documentary one.

The two materials have separate CAS numbers, separate molecular weights, separate certificates and separate label names. “AKG” is a shorthand that covers both, and a specification written on the shorthand has not chosen either. Neither form is a stronger version of the other; they are different ingredients with different masses and different behaviour in water.

The calcium figure

α-Ketoglutaric acid and calcium α-ketoglutarate in figures
Propertyα-Ketoglutaric acidCalcium α-ketoglutarate
CAS number328-50-771686-01-6
FormulaC5H6O5C5H4CaO5
Molecular weight146.10184.16
Calcium contentNoneAbout 21.8% by mass
Acid equivalent1.000 g per gramAbout 0.793 g per gram
Label nameα-Ketoglutaric acidCalcium α-ketoglutarate

The calcium figure follows from the formula: 40.08 ÷ 184.16 = 0.2176, or about 21.8% by mass in the anhydrous salt. One gram of the salt therefore carries about 218 mg of calcium, and 500 mg carries about 109 mg. The acid carries none. A hydrate carries less calcium per gram, so the water result on the certificate belongs beside the calcium figure whenever the salt is bought.

This is also the simplest analytical check. Calcium by ICP-OES separates the two forms even when the assay of the keto acid looks the same, and a blend of the two lands between the ends in proportion to the mix.

Dose arithmetic between the forms

The acid equivalent converts the two masses. The factor is 146.10 ÷ 184.16 = 0.7934: one gram of the calcium salt is about 0.793 g of acid equivalent, and one gram of the acid is about 1.26 g of the salt. For 200 mg of declared acid equivalent, the weigh-up is 200 ÷ 0.7934 = 252 mg of the salt. Read the other way, 200 mg of the salt provides 159 mg of acid equivalent.

These are conversions, not recommendations. The amount that may be used in a market, and any maximum level, are questions for the buyer's regulatory team; this page does not set them. The conversion also has to be applied to the assay basis: a salt assay on the anhydrous basis is not the mass as weighed, and the water result sits between the two.

Keep the declaration basis consistent. A panel that says “α-ketoglutaric acid 300 mg” and a weigh-up that uses 300 mg of the calcium salt are 62 mg apart in acid equivalent, because 300 × 0.7934 = 238 mg. That gap is a labelling error, not an overage.

The declaration follows the form

EU labelling starts from the form that was purchased: the ingredient name has to identify it. “α-Ketoglutaric acid” and “calcium α-ketoglutarate” are not interchangeable words, and the calcium salt brings a calcium contribution that may need its own place in the nutrition declaration. If the calcium is declared as a nutrient, the EU reference intake for calcium is 800 mg/day as of this review; one gram of the salt supplies about 218 mg, which is roughly 27% of that reference. Check the current text before printing.

On a US Supplement Facts panel the dietary ingredient is named, and any calcium from the salt feeds the calcium declaration. “AKG” alone does not identify either form, and a panel that uses it leaves the reader and the reviewer to guess. The form on the label must be the form the market file covers; convenience at the time of sourcing is not a criterion.

This page is not label text. The buyer's regulatory team confirms the declaration, the nutrient reference values and the claim wording for the destination; no authorisation is asserted here.

The acid and the salt in water

The acid dissolves freely, and its 5% solution reads pH 2.0–3.0. That acidity is useful in some formulas and a problem in others: a drink mix at that pH is sour, and the buffer that fixes the taste also changes the stability data the drink needs. The acid is hygroscopic, and its solution is unstable, so a liquid format needs its own hold time and its own pack.

The calcium salt is a different molecule in water. Its solubility, its solution pH and its stability are properties of the salt, not of the acid, and they have to be measured for the grade being bought. A formulator who swaps one for the other to avoid the acidity should test the replacement in the matrix rather than assume the swap is neutral.

Choosing between them

Choose the acid when the label, the market file and the formula name the free acid, and when the acidic solution is acceptable or can be handled. It is the form in the catalog and the form with the specification on this site. Choose the calcium salt only when the calcium is intended, the label declares it, and a specification for that salt has been agreed and tested.

In either case the purchase order, certificate, label and market file should carry one form and one CAS number. Changing form is a change control with a new specification and a fresh label check, not a factor applied at the weighing bench.

The product hub carries the catalog specification; the grades page places this comparison beside the physical grades; the identity page gives the calcium test; the compliance page covers the market file; the HPLC method note explains the assay. A second specialty powder, D-ribose, shows how a sugar's form and moisture behave differently from an acid's.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation