What the COA for alpha-ketoglutarate actually contains
The certificate for an α-ketoglutaric acid lot lists appearance, IR and HPLC identification, assay, Karl Fischer water, the pH of a 5% solution, heavy metals and microbiology. Beside each parameter should sit the method and the limit the lot was released against, and beside those the measured result. The limits in the first table are the catalog specification; a certificate belongs to one lot and one pack.
A certificate for this acid is only as useful as the method beside each number: HPLC for the assay, Karl Fischer for the water, and a pH reading that states how the 5% solution was made.
Reading the certificate as a test report
Each row of a good certificate can be checked without asking the supplier what it meant. It should say what was measured, how, and against which limit. “Conforms” alone records a judgement without the evidence, and the reader cannot tell a passing lot from a copied specification. The two rows that carry the most weight are identification and assay.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White crystalline powder |
| Identification | IR and HPLC retention | Conforms to the reference |
| Assay | HPLC | 98.0–102.0% |
| Water | Karl Fischer | ≤1.0% |
| pH (5% solution) | Potentiometric | 2.0–3.0 |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
The pH line deserves its own note. It is measured on a 5% solution, so the certificate should state how that solution was prepared; without the preparation, a reading cannot be compared across laboratories. A result outside 2.0–3.0 is a prompt to ask for the method and a re-test, not an automatic rejection.
Assay basis, water and the HPLC method
An assay means one of two things unless the basis is printed: the percentage of the powder as weighed, or the percentage of its dry matter. The 1.0% water limit keeps the difference small, but small is not zero. Take a lot at 97.5% as-is with 0.9% water: on the anhydrous basis it calculates to 98.39%, so the same powder passes one gate and fails the other.
Ask for the basis in the assay row and the water result next to it. Ask, too, for the chromatographic conditions: column, mobile phase, wavelength and standard. An α-keto acid has a weak ultraviolet chromophore, so many assays run at a short wavelength where the baseline is sensitive to the solvent; a certificate that names no wavelength has described a technique, not a method.
The numbers should also add up. Assay plus water plus impurity peaks have to be consistent; if the first two already exceed 100%, either the basis or the method is wrong, and the lot should not be released until that is resolved.
The release limit and the measured result
One number states where the specification draws the line; the other reports what the laboratory found. They need separate columns, and the method belongs beside both. Filling the result column with the specification range tells the reader nothing about the pack in front of them.
| Parameter | Release limit | Result column |
|---|---|---|
| Assay | 98.0–102.0%, basis stated | A measured percentage, with its basis and method |
| Water | ≤1.0% | A measured percentage |
| pH (5% solution) | 2.0–3.0 | The measured pH and the solution strength |
| Heavy metals | Per element | A measured figure in mg/kg for each element |
| Microbiology | Counts and absence | The count and the absence statement for the lot |
| Appearance | White crystalline powder | A short description of the lot |
“Passes specification” should be a conclusion the reader can verify. Metals need a figure per element rather than a total, because a sum can hide the one that is close to its limit. For microbiology, the count and the absence statement must be tied to the lot rather than copied from a generic panel.
What shifts from lot to lot
Different production routes leave different fingerprints. Fermentation and chemical oxidation can both yield the acid, but the residual organic acids, the colour and the trace-metal profile may not match. The crystallisation and drying steps move water and crystal habit, and granulation moves the particle-size result when that grade is bought.
Appearance is a coarse signal but a useful trend. White to off-white is the catalog description; a cream or yellow cast may mean heat exposure or an oxidation product while the assay is still inside its range. Compare several lots before rejecting one on colour, and ask for the batch record.
Every certificate should be tied to a pack. The lot code has to appear on the pouch or drum label, the certificate and the retained sample; a certificate that cannot be matched to a pack is only a data sheet with a date.
When to bring in an outside laboratory
Independent testing earns its place when a source is new, a market is regulated, a result is disputed or the form is unproven. The panel should be built around the question: HPLC with a stated wavelength and IR for identity, Karl Fischer for water, pH of the 5% solution, ICP-MS for the metals and a microbiology set.
Calcium by ICP-OES is the test to add when the form is uncertain. The acid contains none; the calcium salt contains about 21.8%, so the counter-ion result separates materials that a keto-acid assay cannot. Reserve NMR or high-resolution mass spectrometry for an unidentified impurity.
Ask for the detection limit behind every “not detected”. Without the limit, the statement describes the laboratory's sensitivity rather than the sample. Trace it as well: the material in the laboratory should be the retained material, and the lot number should appear on the report.
Comparing two suppliers
| Line | What to compare |
|---|---|
| Form and CAS | α-Ketoglutaric acid, 328-50-7, not the calcium salt |
| Assay and basis | The figure, the method and whether it is as-is or anhydrous |
| Water | The measured result against the ≤1.0% limit |
| pH | The 5% solution result and how the solution was made |
| Contaminants | Metals per element and the microbiology count |
| Pack and lot | Pouch or drum, lot code and retained sample |
Two offers that match on assay but differ on form or basis are offers for different powders. After the numbers, compare traceability: manufacturer, route, drying and packing, and the documents that follow the lot.
Catalog values are listed on the product page; the acid-versus-salt tests are on the identity page; the market questions are on the compliance page; the assay is described in the HPLC method note; release is covered on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation