05 Compliance

The regulatory file for alpha-ketoglutarate

Technical document 05 · Reviewed 2026-11-19 · Alpha-Ketoglutarate

On this page
  1. The four questions the file answers
  2. European Union
  3. United States
  4. Contaminants at the finished-product level
  5. Label, claims and form
  6. Papers in the lot file
  7. Pre-order checklist

The material on this page is α-ketoglutaric acid, CAS 328-50-7, and its calcium salt is a separate ingredient with its own CAS number. A specification and a certificate describe the powder; they do not decide whether it may be sold in a given market. That decision belongs to the buyer's regulatory team, and this page sets out the file they will want.

In one line

A specification and a certificate answer what the powder is; only the destination file answers whether it can be sold and how it must be named.

The four questions the file answers

The file has to answer four things. First, the identity and revision of what is being bought. Second, the laboratory findings for the lot on release. Third, the limits and label rules that govern the finished product where it will be sold. Fourth, the trigger list: what has to be re-opened if source, process or pack changes.

The lot is evidenced by its certificate, the specification by its data sheet, and handling by the safety data sheet. Route is a fourth document, built by the buyer for the destination. Start with the form: the free acid and the calcium salt differ in CAS number, calcium content and name, and a file that mixes them belongs to neither.

European Union

In the EU the file rests on the general food law, the food-supplement framework, the labelling rules and the contaminant regulation. Where a form has a product-specific route, that route sits on top and may set its own conditions. As of this review, read Regulation (EC) No 178/2002, Directive 2002/46/EC, Regulation (EU) No 1169/2011 and Regulation (EU) 2023/915, and check the current consolidated versions rather than a summary.

No statement on this page should be read as confirmation that either form is authorised as a novel food or as a food-supplement ingredient in the EU. The destination file makes that call. For Great Britain, read the GB register and GB labelling on their own; Northern Ireland stays with the EU framework.

United States

The US route depends on the exact dietary ingredient and on what the finished product claims to be. The supplier should be able to explain what basis it holds and produce the paper; whether that basis reaches the finished product and its panel statement is the buyer's judgement. The Supplement Facts panel needs a name that identifies the form, and “AKG” does neither.

Certification and marketing review are separate exercises. A lot that meets the purchase specification has not thereby cleared its route, and a supplier letter does not replace the buyer's own review. Federal requirements current at the time of sale govern.

Contaminants at the finished-product level

The finished product carries the limit, so the calculation starts from the daily dose rather than from the drum result. The table gives the usual supplement starting points; the destination text sets the final figure.

Contaminants to confirm at the finished-product stage
ContaminantUsual supplement starting pointEvidence for the file
Lead (Pb)3.0 mg/kg in the supplementLot result, method, limit and the finished-product calculation
Cadmium (Cd)1.0 mg/kg in the supplementLot result and any category exception that applies
Mercury (Hg)0.10 mg/kg in the supplementLot result and method
Arsenic (As)Customer or market limitThe agreed limit and the method, stated on the certificate

Water and pH are specification parameters, not contaminant limits; they belong in the release record. The calculation uses the daily dose and the ingredient's share of the formula, not the raw-material result in isolation.

Label, claims and form

The label has to name the material, the quantity and the form the destination expects. Here the form is the name: “α-ketoglutaric acid” and “calcium α-ketoglutarate” are different declarations, and the calcium salt may also require a calcium entry in the nutrition information. The label should follow the form covered by the market file, not whatever was available at the time of production.

Claims are a separate review. The brand's reviewer decides whether a wording is permitted for that product, form and market. Approving a claim is a different act from certifying a lot, and neither alters the specification. Nothing on this page is a disease-related claim.

Papers in the lot file

The lot file that buyers usually ask for contains:

  • a certificate for the lot: appearance, identity, assay, water, pH, metals and microbiology;
  • the technical data sheet and purchase specification, naming the form and CAS number;
  • a safety data sheet in the 16-section format;
  • allergen, GMO, origin and residual-solvent statements;
  • the specification revision, pack and retest period;
  • an independent certificate where the buyer's review asks for one.

Each document should be dated or versioned, or tied to a lot. Version and lot references are what tie the set together; without them the papers prove nothing.

Pre-order checklist

  1. One form and one CAS number appear on the specification, certificate and label.
  2. The assay basis, water result and 5% solution pH are all reported.
  3. Metals are re-checked against the finished-product dose.
  4. Label and claim wording have passed review for the destination, calcium included.
  5. Source, process and pack sit under change control, and the regulatory team has confirmed the route.
  6. One revision number should appear on the quotation, the specification and the certificate.

Catalog values are on the product hub; the lot certificate is explained on the COA page; the analytical evidence is on the identity page; the acid and the salt are separated on the grades page. Release is described on the quality page, and the framework reference is the EU regulatory note.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation