Alpha-ketoglutarate grades: acid, calcium salt and particle form
The catalog grade is α-ketoglutaric acid, CAS 328-50-7, C5H6O5, a white crystalline powder at 98.0–102.0% by HPLC. Calcium α-ketoglutarate is a different salt with its own CAS number, molecular weight, calcium figure and label name, and granulated acid is the same chemistry at a coarser particle size. The choice follows the dosage form, the label and the market file, not assay alone.
The grade decision is the chemical form first and the particle size second; calcium α-ketoglutarate is a different salt, not a stronger acid.
Why there is more than one grade
α-Ketoglutaric acid is a dicarboxylic acid, also written 2-oxoglutaric acid, and its two acid protons can be replaced by a metal. In calcium α-ketoglutarate both protons are replaced by one calcium ion, which gives a different formula, a different molecular weight and a different CAS number. The two materials are related, but they are not interchangeable.
Within the acid there is a second, smaller choice: crystalline powder or granulate. Granulation changes flow, dust and the rate at which the powder dissolves. It does not change identity, assay or the chemistry, so the grade question has two layers, and the chemical one comes first.
A purchase order that names only “AKG” or “alpha-ketoglutarate” has not chosen a grade. Order, specification and label should spell out the form, the CAS number and the physical grade identically.
The acid and the calcium salt side by side
| Property | α-Ketoglutaric acid | Calcium α-ketoglutarate |
|---|---|---|
| CAS number | 328-50-7 | 71686-01-6 |
| Formula | C5H6O5 | C5H4CaO5 |
| Molecular weight | 146.10 | 184.16 |
| Calcium content | None | About 21.8% by mass, anhydrous |
| Acid equivalent | 1 g of acid per gram | About 0.793 g of acid per gram |
| Salt type | Free acid | Calcium salt |
| Label name | α-Ketoglutaric acid | Calcium α-ketoglutarate |
The acid-equivalent row is the one that travels into dose arithmetic. The calcium row is the one that travels into the label. Neither row is a statement that one form is better; they are different ingredients for different jobs.
Powder, granulate and the physical behaviour of the salt
The acid is a white crystalline powder, freely soluble in water, and a 5% solution reads pH 2.0–3.0. It is hygroscopic: left open, it takes up water, cakes and gains weight on the balance. The catalog limit is water ≤1.0%, and the pack is part of keeping it there.
Granulation is a finishing step. A granulated acid flows better in a tablet press or a stick filler and raises less dust, but it should still carry the same assay, water and pH limits, plus a particle-size line of its own. Granules usually dissolve more slowly than the fine powder, so a formulator who switches should check dissolution in the real matrix rather than assume it.
The calcium salt is a different solid with its own solubility, solution pH and water uptake. Its physical behaviour cannot be read across from the acid, and a specification for it has to be built and tested for that salt. What the two share is the keto acid, not the powder.
Which grade suits which dosage form
For capsules and tablets, either the powder or the granulate works, and the choice is about flow and fill weight. The hygroscopic powder needs a pack that keeps water out after the bottle is opened; the granulate handles more easily but takes more volume at the same mass. The label declares the acid, so the fill weight is the acid mass.
For powder sticks and drink mixes, the acid dissolves readily, but a 5% solution is acidic and the taste follows. A formulator can buffer or flavour around it, and the buffer changes the solution pH and therefore the stability data the drink needs. A granulated grade may dissolve more slowly in a cold drink; test it in the intended use.
The calcium salt belongs in a formula where the calcium is part of the label and the market file, not as a quiet way to add a mineral. It also changes the ingredient name on the panel, so a formula built around the acid cannot be switched without re-checking the label and the dose arithmetic.
Clauses for the specification
- “α-Ketoglutaric acid, CAS 328-50-7, C5H6O5.”
- “Assay 98.0–102.0% by HPLC, with the basis stated.”
- “Water ≤1.0% by Karl Fischer; pH of a 5% solution 2.0–3.0.”
- “Heavy metals and microbiology as listed on the catalog specification.”
- “Particle size and flow where a granulated grade is bought.”
- “Pack and storage condition, because the powder is hygroscopic.”
- “Destination market and form confirmed before the order.”
When the other grade is a mistake
Do not choose the acid when the label, the market file or the customer's specification names the calcium salt. Do not choose the calcium salt as a substitute when the formula was built on the acid's pH and solubility. Do not choose a granulated grade for a drink mix without checking that it dissolves in the time the consumer will give it.
The reverse cases matter too. A buyer who needs a free-flowing blend should not accept fine powder and adjust the process afterwards, and a buyer who needs the acid should not accept the salt because the assay figure looks similar. The form belongs to what the material is, and it should be fixed before anyone stands at the balance.
The product hub carries the catalog specification; the level-four comparison takes the salt and the calcium figure further; the COA page shows how the form is reported; the compliance page covers the market file. A second hygroscopic specialty powder, D-ribose, shows the same pack-and-moisture logic from a sugar rather than an acid.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation