05 Compliance

The regulatory file for manganese gluconate

Technical document 05 · Reviewed 2026-11-19 · Manganese Gluconate

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and the manganese figure
  5. Label and claims
  6. Documents in the file
  7. Checklist before the first order

Manganese gluconate, CAS 6485-39-8, is an ingredient rather than a finished product, so its regulatory position is a question of route and destination: food supplement, fortified food or another use. The buyer's regulatory team settles that question for each market. What follows sets out the framework, the limits and the paperwork that belong in the file.

In one line

The specification describes the material; the destination route, the manganese limit and the label are separate questions that the buyer's regulatory team confirms.

What the file contains

The file has to settle three things in order: what the powder is, which route it enters the market under, and what the label may say. The specification and the lot certificate settle the first. The route is a legal question for the destination, and the label follows from both.

The route cannot be assumed. A nutrient source in a supplement, an ingredient in a fortified food and a material for another use are three different files. The salt name, the use level and the country decide which one applies; the specification does not. Great Britain keeps its own register and labelling rules while Northern Ireland follows the EU framework, so the two are checked separately.

Paperwork completes the file: allergen and GMO statements, origin, residual solvents, and any customer declaration. If a statement is missing for the lot, say so before the order. A list with version numbers beats a folder of undated PDFs.

European Union

In the EU the file rests on general food law, Regulation (EC) No 178/2002, for safety and traceability, plus the route-specific text. For food supplements, Directive 2002/46/EC lists the mineral substances and forms that may be used. The annex is amended from time to time, so check the current version and confirm that the form on the certificate is the one listed. The buyer's regulatory team decides whether the route covers the finished product.

Labelling sits under Regulation (EU) No 1169/2011. Annex XIII gives manganese a reference intake of 2 mg per day for the nutrition declaration; that is a labelling reference, not a ceiling. Claims sit under Regulation (EC) No 1924/2006 and the regulations that authorise individual wordings, and the amount per portion has to meet the condition attached to the entry.

Contaminants sit under Regulation (EU) 2023/915, which replaced Regulation (EC) No 1881/2006. It sets maximum levels for lead, cadmium and mercury in food supplements. The file should show the lot result against the level that applies; the text can change, so check the consolidated version as of this review.

United States

In the United States the starting point is the dietary-supplement route. DSHEA governs it, 21 CFR 111 supplies the manufacturing practice, and the label carries a Supplement Facts panel. The manganese Daily Value used there is 2.3 mg for adults and children four years and older. A conventional food use follows the food-additive route instead, with a different file.

The ingredient's status is documented rather than assumed. A dietary ingredient with a pre-1994 marketing history and a new dietary ingredient supported by a notification under 21 CFR 190.6 are different files, and the buyer's regulatory team confirms which one applies. The supplier provides the identity, specification and safety documents that the file relies on.

Claims are reviewed on their own. A structure or function statement needs the required disclaimer and must stop short of a disease claim; the label and the claim are separate from the certificate. California's Proposition 65 adds a lead-warning question for products sold there, and the lot result is where that review starts.

Contaminants and the manganese figure

The contaminant panel is calculated on the finished product, not only on the drum. The table gives the usual starting references for a supplement file; the current text and the daily dose decide the final number.

Contaminant limits to confirm for the finished product
ParameterUsual supplement referenceEvidence the file needs
Lead (Pb)3.0 mg/kg in the supplementLot figure, method and the dose conversion
Cadmium (Cd)1.0 mg/kg in the supplementLot figure, plus any category exception
Mercury (Hg)0.10 mg/kg in the supplementLot figure and method
Arsenic (As)Agreed with the customer or marketThe limit and method written on the certificate

Manganese is the nutrient, not a contaminant, so the question is dose rather than residue. The EU reference intake is 2 mg per day and the US Daily Value is 2.3 mg; a member state may set its own maximum for supplements, and the buyer confirms whether one applies. A high-dose product needs that check before the label is written.

Label and claims

In the EU only the authorised nutrition and health claims are available, each with conditions on wording, amount and presentation. The EU claim register includes entries for manganese, but the exact text and the amount per portion still have to be matched to the current regulation. In the United States a structure or function statement needs the disclaimer and must not become a disease claim. Approval of a claim is separate from the certificate, and a claim cannot rewrite the specification.

The label names the salt as well as the element. “Manganese gluconate” is the ingredient and the manganese figure is the declaration. A label that says only “manganese” leaves the source open, and a switch to the sulfate or the bisglycinate is a new label and a new file.

Documents in the file

  • A lot certificate with the manganese and assay figures, water and the contaminant results.
  • The specification revision and the technical data sheet that the offer refers to.
  • Safety data sheet, allergen statement, GMO statement and origin record.
  • Residual-solvent statement, non-irradiation statement and any processing-aid declaration.
  • Packing list, certificate of origin and the statements the importer asks for.
  • Change-control record covering the source, the process and the pack.

Checklist before the first order

  • The specification revision, CAS number and exact salt are written down.
  • The destination route has been confirmed by the buyer's regulatory team.
  • The contaminant figures have been carried through to the finished-product dose.
  • The manganese level is checked against the destination's limit or guidance.
  • The label names the salt, and the claim wording has been reviewed.
  • COA, TDS, SDS and the statements on file all refer to the same version.

The catalog ranges are on the product hub; the lot certificate is explained on the COA page; the salt choice is set out on the level-four comparison; framework references are in the EU regulatory note and the US regulatory note; the panel is defined in the heavy-metals entry; release practice is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation