Heavy Metals
The contaminant panel covering lead, arsenic, cadmium and mercury.
Definition
The term heavy metals covers the contaminant elements tested in a food or supplement ingredient, most often lead, arsenic, cadmium and mercury. Each element has its own limit, method and reporting basis, so a single combined figure is not enough for a specification. Results are usually reported in milligrams per kilogram against the limit for the destination market.
The EU reference limits for food supplements are 3.0 mg/kg for lead, 1.0 mg/kg for cadmium and 0.10 mg/kg for mercury. Arsenic is not covered by those three figures and is specified separately. The COA should report each element and the method used, normally ICP-MS after acid digestion.
Why it matters in a specification
- Contaminant limits vary by market, and the specification has to name the market.
- The panel is a release test for supplement ingredients, not an optional extra.
- A combined figure hides which element is close to its limit.
What to ask a supplier
- Which elements are covered, and against which market limits?
- What is the method and the quantification limit for each element?
- Are the results from an accredited laboratory?
Where it appears
- Magnesium Bisglycinate — 1:2 magnesium–glycine chelate, anhydrous basis.
Related terms
If a term in your specification is ambiguous, send the document and we will name the definition we would use.
Request a specification review