04 MOQ & ordering

Manganese gluconate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Manganese Gluconate

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot, not a demonstration
  6. Terms to settle before the first order

One kilogram is the minimum order for manganese gluconate, and it ships as a 1 kg foil pouch; production volumes usually take the 25 kg fiber drum. Standard packs leave within 1–7 days of order confirmation. To turn an enquiry into a firm quotation, the supplier needs the manganese and assay specification, the water and mesh figures, the pack and quantity, the destination and trade term, the documents, and the market and use.

In one line

One kilogram is the smallest unit that can be sampled, tested and traced as a lot, and the 25 kg drum is the same material with a longer opening history.

Why the minimum is 1 kg

A kilo covers a bench trial, a retain and a second-laboratory check, and it can travel as a parcel. That is enough to qualify a source before a production plan exists. The pack carries a lot code, so the trial material, the retain and the paperwork all point to the same batch.

A smaller quantity means a repack from a larger lot: extra handling, a new label and a weaker chain back to the original pack. The 25 kg drum cuts handling per kilo but ties up inventory and stays open longer. The minimum follows the pack, not a sales target.

Packs and formats

Standard manganese gluconate packs
PackNet fillTypical jobOpening behaviour
Foil pouch1 kgBench trial, retain, small batchOne opening; reclose immediately
Fiber drum25 kgProduction runsRepeated openings; liner is the barrier
Granulated gradeOn requestTablet press, dust controlNew specification, not a pack size

The catalog form passes 40 mesh at 95% or better. Granulation changes the sieve line, may raise density and may introduce an aid that has to be declared, so raise it before the offer rather than after. The change can also move the lead time.

The drum depends on its liner for the moisture barrier. Close the liner after each use, stand the drum on a pallet in a damp store, and note the opening date. Drum, liner and certificate should carry one code.

Lead time and dispatch

The quoted 1–7 days covers picking, paperwork and hand-over to the carrier. Transit, customs and the customer's own release sit outside it. A custom granulation or a non-standard pack adds time, and the offer should say so separately.

Ask when it will leave, not only how long the lead time is. A drum travels on a pallet and a pouch as a parcel; the Incoterm assigns the freight booking and the entry clearance. Send the documents with the lot rather than after it.

What a quotation needs

Six details make two offers comparable:

  1. The salt and its CAS. Manganese gluconate, 6485-39-8, spelled out rather than “manganese”.
  2. The manganese range and assay. With the factor or basis behind the two figures.
  3. Water and mesh. The Karl Fischer limit and the particle-size line.
  4. Pack. 1 kg pouch, 25 kg drum or a granulated grade.
  5. Destination and Incoterm. Country, port or address, and trade term.
  6. Documents, use and market. COA, specification, SDS, any market statement, and what the material is for.

An offer that omits the market and the use cannot be checked against the route. Terms and figures belong in the offer itself.

The sample is a lot, not a demonstration

Qualify from the kilo, not from a spoon: run identity, manganese, assay, water and microbiology, and retain a portion of the same pack. The lot code on the sample, the certificate and the offer should match. If the sample cannot be tied to a lot, it demonstrates the powder but does not qualify it.

A smaller bench quantity is possible by arrangement, but it is a repack with its own traceability and should be documented as one. The bench sample and the production drum are not necessarily one lot.

Terms to settle before the first order

The offer covers the commercial side: Incoterm, pack, lead time and documents. The quality side needs its own agreement: which specification revision applies, a COA per lot, a retained sample, the water limit, the retest period and how changes are handled. Settle those points before the first production order; a dispute is the worst time to invent them.

Returns follow the offer and the quality agreement. If a lot misses the agreed specification, compare the retained samples and arrange a joint re-test rather than arguing over a photograph. Agree in advance which laboratory is acceptable to both sides and who commissions the referee test.

The catalog ranges are on the product hub; release tests are listed on the COA page; the market file is on the compliance page; the glossary has a short entry on MOQ; shipping and documents are covered on the logistics page; release practice is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation