01 COA & batch testing

What the COA for magnesium citrate actually contains

Technical document 01 · Reviewed 2026-11-18 · Magnesium Citrate

On this page
  1. The certificate as a single sheet
  2. What the magnesium figure is measured against
  3. Release limit, batch result and the word “conforms”
  4. What changes between lots
  5. When to send a lot to a second laboratory
  6. What to compare between two suppliers

Every lot of magnesium citrate ships with a certificate that carries nine lines: appearance, the magnesium assay, the citrate identity, loss on drying, pH, particle size, bulk density, the heavy-metal panel and microbiology. The lines are fixed by the specification; the results belong to the lot. Two of those lines go to identity, the rest describe its condition, and the sheet is only as useful as the method printed beside each figure.

In one line

A magnesium figure does not identify the salt: the certificate has to carry the citrate identity, the water and the hydrate basis beside the metal.

The certificate as a single sheet

A release certificate is written against the specification, not a catalogue description, so every line has three parts: parameter, method and limit. A result with no method cannot be repeated by a second laboratory; a limit with no result is a promise rather than a measurement.

Batch COA · anhydrous magnesium citrate, 14.5–16.4% magnesium
ParameterMethodRelease limit
AppearanceVisualWhite to off-white powder
Magnesium (Mg)Complexometric EDTA titration14.5–16.4%
Citrate identityCitrate reaction and infrared spectrumConforms to reference
Loss on dryingUSP <731>, 105 °C≤2.0%
pH (5% suspension)Potentiometry5.0–8.0
Particle sizeSieve analysis≥95% through 40 mesh
Bulk densityGraduated cylinder0.50–0.80 g/mL
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and enrichmentAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent

The microbiological limits are agreed before the lot is made, never chosen after the result is known.

What the magnesium figure is measured against

The magnesium line is a complexometric titration. EDTA is added at about pH 10 in the presence of a metal indicator, it binds the magnesium ion in a 1:1 complex, and the volume consumed is converted into a percentage of the sample. The method is precise and blind: it counts magnesium atoms and cannot see whether they sit on citrate, oxide or carbonate.

The molar arithmetic is fixed. Magnesium citrate is Mg₃(C₆H₅O₇)₂ — three divalent magnesium ions balancing two trivalent citrate ions — with a molar mass of about 451 g/mol for the anhydrous salt. Magnesium contributes 72.9 g/mol of that total, or 16.2%, and the catalogue range of 14.5–16.4% brackets the calculation. Counted as C₆H₅O₇, citrate makes up about 84% of the same molecule — the figure to hold beside the magnesium when a drum is checked.

The hydrate is the second half of the basis. The nonahydrate adds nine water molecules, about 162 g/mol, and drops to about 11.9% magnesium. A certificate reporting 11.9% is not a weaker salt; it is a heavier molecule carrying the same anion. That is why the loss-on-drying line belongs next to the assay, and why a specification that names the salt but not the hydrate has not described the drum. The hydrate glossary entry sets out the arithmetic.

The identity lines cover what the titration cannot. The citrate reaction precipitates the anion as calcium citrate from a neutral solution, and the infrared spectrum is compared with a reference — carboxylate bands near 1600 and 1400 cm⁻¹, the broad water band near 3400 cm⁻¹. An identity result is a yes or a no, so the sheet should also name the reference the lot conformed to.

Release limit, batch result and the word “conforms”

A release limit is the gate and a batch result is the measurement. The sheet needs both, in the same row as the method. “Passes specification” is a conclusion, not evidence, and cannot be audited without the figure behind it.

Identity lines behave differently from assay lines. Magnesium is a number inside a range; citrate identity is reported as “conforms”. That word is worth something only when the standard, the analyst and the date of the comparison are traceable. A conformity with no named reference is a blank with a stamp on it.

Some parameters pass anywhere inside the range and still differ in behaviour downstream. Bulk density inside 0.50–0.80 g/mL passes at either end, yet a lot at 0.51 g/mL and a lot at 0.79 g/mL behave differently in a hopper and a capsule die.

What changes between lots

The magnesium figure follows the reaction and the crystallisation: the ratio of magnesium source to citric acid, the completeness of salt formation, and the losses in filtration and drying. Incomplete drying leaves water in the powder, which lowers the magnesium on a mass basis and raises loss on drying at the same time. Read the two lines together for exactly that reason.

Particle size follows milling and sieving, and bulk density follows the particle shape that results, with moisture as a second input. The pH of the 5% suspension follows the washing step and the citrate left in the liquor. None of these is a defect; they are the normal spread of a crystallised solid, and they are why the specification is written as a range.

Colour is the least quantitative signal and often the earliest warning. A grey or dull tint can point to iron pickup from the dryer, to overheating, or to a different magnesium source. The assay can still pass. A tint is a prompt to pull the batch record; on its own it is not grounds for rejection.

When to send a lot to a second laboratory

A second laboratory earns its fee at four moments: an unfamiliar source, a debut shipment to a regulated market, a label that names a form, or a dispute that needs a neutral reading. The useful panel closes the gap the certificate leaves open rather than repeating it.

For this salt that usually means an independent citrate identity by infrared comparison, water by Karl Fischer rather than loss on drying alone, an ICP-MS panel on the same sample, and an X-ray diffraction screen for crystalline magnesium oxide. The titration method page explains what the EDTA figure can and cannot support.

The retained sample, the supplier's certificate and your own specification should go out together. Ask for the four tests that decide the form; a full repeat of the certificate rarely settles the question that caused the dispute.

What to compare between two suppliers

Put six lines side by side: the salt and its hydrate state, the magnesium range and method, the citrate identity method and its reference, the loss-on-drying limit with its temperature, the mesh and bulk density, and the contaminant method with its detection limits. A supplier who answers five of the six is describing a different drum.

The second layer is traceability. The certificate lot number, the drum label and the retained sample should carry one identifier between them, and the certificate should name the manufacturing site. An accurate certificate can still describe a lot that is not the one in your warehouse.

The catalogue line this page describes sits on the magnesium citrate product page. The grade comparison settles the hydrate, the identity page covers the tests that separate the salt from a blend, and the quality page shows how the release file is assembled.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation