03 Stability

Magnesium citrate is stable dry; the hydrate and the matrix decide the rest

Technical document 03 · Reviewed 2026-11-18 · Magnesium Citrate

On this page
  1. The powder in its pack
  2. In solution, and the citrate reaction
  3. What moves the figure
  4. The test protocol
  5. Formulation and packaging
  6. Where the shelf life comes from

Magnesium citrate is a crystalline salt that keeps well in a sealed pack. The anhydrous grade is the more eager of the two to take up water, because it can move toward a hydrate; the nonahydrate starts with its water already in place. Most shelf-life problems begin in the matrix rather than the powder: the pH, the other cations in the formula and the pack decide what happens next.

In one line

The dry powder keeps well; moisture, the pH of the matrix and the other cations in it are what decide the shelf life.

The powder in its pack

In the unopened 25 kg fiber drum, with the food-grade liner sealed, the salt is stable at ambient temperature. It is an ionic solid with a defined crystal form, and the magnesium assay has nothing to drift toward. Water is the practical risk: leave the liner open in a humid room and the powder draws moisture in, and on the anhydrous grade part of that water enters the crystal rather than staying on the surface.

Loss on drying is therefore a release parameter and a storage indicator at the same time; the method entry covers how the figure is obtained. A lot that arrives at 0.4% and sits open at 70% relative humidity can move toward 1.5% in a working week, and the visible signs are caking, a change in bulk density and bridging in the hopper. The fix is procedural before it is chemical: reseal the liner, keep the drum in a dry store, and add a desiccant where the destination climate asks for one.

The powder is not light-sensitive in any practical sense, and the white to off-white colour is stable in a sealed pack. A tint that appears after storage is a moisture or metal signal, not a photodegradation signal.

In solution, and the citrate reaction

A 5% suspension sits at pH 5.0–8.0, slightly acidic to neutral. That range is a property of the salt, not a defect: citrate is the conjugate base of a weak acid, and the salt buffers around its own pH. In a beverage, the matrix pH moves the material in two directions.

Below about pH 4, the citrate is progressively protonated to citric acid. The magnesium is released as the free ion, solubility rises, and the taste sharpens toward sour. That is usually workable in a carbonated or fruit-flavoured drink, provided the acid level is deliberate and the preservative system covers the water activity.

Above about pH 9, the equilibrium turns the other way and magnesium can begin to precipitate as the hydroxide, which shows up as haze or sediment rather than as an assay loss. Between those two ends the salt stays dispersed, but it is no longer the only species in the water. Citrate binds divalent and trivalent cations, so a formula that also carries calcium, iron or zinc sets up a competition. Calcium citrate is only sparingly soluble, and a clear drink that adds both salts can throw a haze that neither ingredient shows alone. Iron citrate complexes can shift colour from white toward yellow or green.

Heat accelerates all of it: dissolution, ligand exchange and the browning that comes from any reducing sugar in the matrix. A bench trial at the real pH, the real mineral load and the real process temperature tells you more than a room-temperature solubility check.

What moves the figure

Stability factors · magnesium citrate in storage and in formula
FactorEffectControl
MoistureHigher loss on drying, caking, hopper bridgingSealed liner, dry store, desiccant
pH below 4Protonation, sharper taste, higher free magnesiumSet the acid level deliberately; trial the taste
pH above 9Haze or sediment as magnesium hydroxideBuffer the matrix; avoid alkaline systems
Calcium in the matrixSparingly soluble calcium citrate, hazeSeparate the minerals or accept a cloudy format
Iron and zincLigand exchange, colour shiftSpecify trace-metal limits; trial the blend
HeatFaster exchange, browning with reducing sugarsLower process temperature, control water activity
PackMoisture vapour and odour transferFoil laminate for sticks; sealed liner for drums

The test protocol

A bulk study puts the powder into the commercial pack and holds it at 25 °C/60% RH and at 40 °C/75% RH. Sample points fall at 0, 2, 6, 12 and 24 months, and every point is tested for magnesium, loss on drying, pH, appearance, particle size and microbiology. The warmer condition exists to pull a trend into view inside the study window; it is not a storage recommendation.

An in-matrix study is a separate exercise. The finished capsule, tablet, stick or gummy goes into 30 °C/65% RH and 40 °C/75% RH chambers and is tested for magnesium, moisture, colour, taste and, where relevant, dissolution or disintegration. The dosage form can fail while the powder in the drum still passes, and the dosage-form result is the one the brand needs.

Formulation and packaging

A capsule or a tablet protects the powder, and what threatens it there is moisture and the excipient list. A direct-compression blend needs a lubricant that does not bring water, and a hygroscopic anhydrous grade benefits from a sealed blister or a tight HDPE pack with a desiccant. A granulated grade usually flows better but may carry a binder that has to be declared.

In a stick pack the pack is the product: start from a foil laminate, heat-sealed and with a low moisture-vapour transmission rate, and regard a paper or clear construction as a retail choice that has to be backed by data. In a gummy or chew the sugar system, the water activity and the pH dominate, and the citrate note has to be masked. In a drink, the pH and the preservative system outrank the choice of grade, and a clear format needs the calcium and iron interactions checked before launch.

Where the shelf life comes from

The period is whatever the study on that grade and that pack supports; there is no default figure attached to the molecule. The technical data sheet names the storage condition and either a retest period or an expiry date — retest for a bulk ingredient that is checked again before use, expiry for a pack that goes to a consumer.

Where the data do not reach the pack, the matrix or the climate, the answer is a shorter period or another study. Re-testing an old lot once and moving the date out is not a shelf life. The COA page sets out the parameters tracked over time, the ordering page lists the packs a study must cover, and the quality page describes the record keeping.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation