04 MOQ & ordering

Magnesium citrate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-18 · Magnesium Citrate

On this page
  1. Where the one-kilogram minimum comes from
  2. Packaging
  3. Lead time
  4. What the quotation needs
  5. Samples
  6. Payment and terms

Orders for magnesium citrate start at one kilogram: a foil pouch drawn from a released lot, with that lot's certificate in the same carton. Production moves to a 25 kg fiber drum. Confirmation to dispatch runs one to seven days, and what goes into the reply depends on the grade, the quantity and the market the drum is travelling to, not on a headline figure.

In one line

A kilogram is enough to qualify the grade; production runs from the 25 kg drum, and the quotation is assembled from grade, quantity and market.

Where the one-kilogram minimum comes from

A first order is a qualification exercise, not a stock purchase. A kilogram is enough for a bench trial, a short stability pilot and a small capsule or tablet batch, taken from a lot that has already been released — not out of a sample cabinet. What the buyer tests is then the material that will arrive on a pallet, certificate included.

The minimum is not a volume threshold. It is the smallest quantity that can be packed, labelled and documented without creating a lot that exists only to be a sample. Above one kilogram, packing follows the same lot where its size allows; where it does not, a new lot is made and a new certificate follows it.

One point is worth settling before the order rather than after it. The catalog line on this site is the anhydrous salt at 14.5–16.4% magnesium. The nonahydrate is quoted against its own specification, with its own magnesium range and its own drying limit. A one-kilogram trial of the wrong hydrate will produce a perfectly good certificate for a material the label cannot use.

Packaging

Standard packs · magnesium citrate
PackUseNotes
1 kg foil pouchQualification and bench workHeat-sealed food-grade liner; lot label on the pouch
25 kg fiber drumProductionSealed food-grade liner, tamper-evident closure
PalletBulk shipmentStretch-wrapped, lot labels facing out

The liner is a component of the pack, not a packing extra. A drum whose liner is not sealed is storing the powder differently, and nothing on the certificate tells you which way it travelled. If the destination is humid, say so in the order: a desiccant can be added and the packing specification can name it.

Every pouch and drum is labelled with the product name and hydrate, the lot, the certificate reference, the net weight and the storage condition. A pack that arrives without a lot number cannot be matched to a certificate, a retained sample or a stability file.

Lead time

The indicative lead time is one to seven days from confirmation of the specification and the order. The count begins at the point where grade, quantity, packing and documents are settled together; an enquiry against an open specification is not yet an order, so it cannot start anything.

Four things extend it, and all four are avoidable. A particle size below the catalog 40 mesh is a milling run. A granulated grade is a separate process. A third-party test has to be booked and reported. A destination that needs a document pack, a certificate of origin or a specific language on the label adds administrative time. Flagging any of them in the first message is what keeps the date short, and the quotation lists the added days separately.

What the quotation needs

  1. The salt and its hydrate — or the specification you want matched.
  2. A first quantity and a rough annual figure.
  3. Where the powder is going: capsule, tablet, stick, gummy or drink.
  4. The destination country, and the paperwork it demands.
  5. The mesh and the bulk density your line can handle.
  6. The date the shipment has to land.

A competitor's certificate is often a quicker start than a written specification: it shows the methods and limits your quality team already works to. Send it and the reply can be a counter-specification that says what can be matched and what cannot. What the reply will not contain is a figure per kilogram: packing, freight and documents change with the destination, so the commercial part is quoted against the actual order.

Samples

Sample packs run 100–500 g, taken from a released lot, with that lot's certificate in the box; the usual turnaround is three to five working days after the specification is settled. A sample that arrives without its certificate cannot be tied to a lot record, and a trial run on it cannot be repeated.

Freight for the sample is quoted alongside it. The sample must also be the grade that will ship: a trial on the anhydrous 40 mesh powder says nothing about a milled 80 mesh or granulated version, and a trial on a hydrate says nothing about the anhydrous line. If the trial is meant to qualify a process variant, ask for that variant.

Payment and terms

Payment terms, Incoterm and the document list are agreed in the order confirmation. They vary with the destination, the order value and whether the account is new, so they are written into the quotation rather than posted as a house rule.

Claims are handled against the retained sample and the lot certificate. If a pack arrives damaged, or the material does not match the document, report it on receipt with photographs of the carton and the lot label; the claim is then checked against the lot record before anything is used. The COA page sets out what the certificate carries, the grade page explains the hydrate choice, and the quality page describes how the lot record and the retained sample are kept. The product line itself is on the magnesium citrate hub.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation