Calcium bisglycinate is stable dry; moisture and the matrix decide the rest
A sealed pack of calcium bisglycinate holds its calcium figure, its mesh and its flow for the shelf life the pack is given; the dry powder is not the fragile part. Moisture pickup, a wet or acidic matrix, heat and a reducing sugar are what move the material, and the packaging decides how much of each the powder meets. Any shelf-life figure has to come from a study on the packed article, not from the name of the salt.
The dry powder is stable in a sealed pack; moisture, an acidic matrix and heat are what change the lot, and the pack decides how much it meets.
The dry powder and the open pack
The catalog loss on drying is ≤5.0%, and the powder is sold free-flowing at 80 mesh. The first change in an open pack is moisture pickup: the particles take water from the air, the surface becomes sticky, and the powder cakes. The loss-on-drying result climbs with it, and a lot that was free-flowing at release can fail to feed a dosator or a sachet line without any change in the calcium assay.
The salt is sparingly soluble, so water does not simply dissolve it; the water sits on the particle surface and in the pore space, which is enough to bridge particles and set a cake. Keep the pack closed, keep the store cool and dry, and regard a part-used pouch as the exposed unit. A desiccant is not a substitute for closing the pack, and a drum that is opened on the factory floor is exposed for as long as the lid is off.
Suspension, pH and the acidic matrix
A 5% suspension sits at pH 6.0–8.0, close to neutral. The salt is sparingly soluble, so the suspension is a dispersion: it will settle, and redispersion is a physical test that belongs in the formula work. A sediment that redisperses is a process issue; a sediment that sets hard is a stability issue.
An acidic drink moves the matrix outside the pH window the salt is specified in. The glycine ligand is protonated as the pH falls, and the fraction of calcium held as the chelate changes; a calcium assay on the finished drink can still pass while the form on the label is no longer the form in the bottle. If the claim depends on the chelate, the stability protocol should follow the form as well as the element. High water activity adds the usual moisture and microbiological risks on top.
The factors that move the material
| Factor | What changes | What to control or test |
|---|---|---|
| Moisture and water activity | Caking, loss-on-drying rise, flow loss | Keep the pack closed; control room humidity; test loss on drying |
| pH | An acidic matrix shifts the ligand equilibrium | Bracket the finished pH; test calcium and the form |
| Heat | Drying and browning; colour drift | Keep the process inside the validated temperature; test colour |
| Reducing sugars | Browning with glycine in a warm, moist matrix | Screen the matrix; test colour and loss on drying |
| Compression | Hardness, density and flow change | Granulate; check tooling and fill weight |
| Packaging | Moisture and light barrier | Foil pouch or fiber drum, closed; check the pack at each stage |
The table is a starting list, not a universal one. A capsule, a tablet, a stick and a gummy expose the same powder to different stresses, and each one deserves its own trial. The order of importance changes with the matrix: moisture dominates a stick, compression dominates a tablet, and heat and water activity dominate a gummy.
A stability protocol for the packed article
Write the protocol around the pack that will be sold: the 1 kg pouch, the 25 kg drum, the stick, the tablet or the gummy. Store the same lot in the same pack at 25 °C/60% RH for the long term, 30 °C/65% RH as an intermediate condition and 40 °C/75% RH for the accelerated arm, and test at 0, 3, 6, 12 and 24 months.
Test the catalog lines — calcium, loss on drying, pH, appearance, mesh, bulk density and microbiology — and add the form lines (infrared spectrum, glycine and free glycine, ratio) where the label depends on the chelate. For a dosage form, add hardness, disintegration, dispersion and colour. Keep a retained sample from the same lot, and record the pack, the condition and the orientation.
A 24-month shelf life needs 24 months of real-time data or a justified extrapolation. Accelerated data supports the claim; it does not replace the real-time arm on its own. If the product ships through a hot climate, add a condition that reflects the route rather than relying only on the standard cabinet.
What the matrix does
The matrix, not the salt, is usually what limits the shelf life. In a capsule, the shell and the fill both pick up water, and the loss on drying and flow of the fill are the early signals. In a tablet, compression and granulation change the density and the hardness, and a granulated bisglycinate may be the better feed than a milled powder.
In a stick, dispersion and sedimentation matter more than assay, and an acidic flavour system moves the pH. In a gummy, water activity, pH and heat meet: glycine is an amino acid, and a reducing sugar in a warm, moist matrix can brown it. That browning is a colour and flavour change rather than a calcium result, and it is the reason a gummy trial should carry colour and loss-on-drying checks beside the assay.
Assigning the shelf life
Assign the shelf life after the study, not before it. The certificate does not carry a shelf life; the specification, the stability summary and the pack do. A retest date is not a shelf life, and a shelf life on a certificate without a study behind it is a claim the buyer cannot audit.
State the storage condition with the shelf life: closed, dry, at a named temperature range, away from strong odours. Shipping excursions are part of the assessment; a closed foil pouch is forgiving for a short excursion, an open one is not. Re-test after a known excursion rather than assuming the original result still applies.
The catalog specification is published on the calcium bisglycinate product page. The release lines are read on the COA page, the market rules are on the compliance page, and the pack sizes are on the MOQ page. The moisture test is defined in the loss-on-drying note.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation