Calcium bisglycinate: MOQ, packaging and ordering
The minimum order for calcium bisglycinate is 1 kg, packed as a foil pouch and cut from a released lot with its own certificate. The production pack is a 25 kg fiber drum, and the lot code on the pouch is traceable to it. Catalog grades ship in 1–7 days; a custom mesh, a granulation or a destination document set adds time to that window.
The 1 kg pouch is the unit for qualifying a lot; grade, pack and destination shape everything after it.
Why the minimum is 1 kg
The 1 kg unit exists for qualification, not for retail. It is enough for a trial batch, a retained sample and an independent check, and it is small enough to be cut from a production lot without starting a new batch. The certificate covers the lot, so the pouch and the drum can be compared on the same document.
At 21% calcium, 1 kg carries about 210 g of calcium. That is a useful trial quantity for a capsule or a stick prototype and far short of a production run. The minimum is therefore about traceability and documentation as much as about mass: the buyer gets a lot code, a COA and a pack that can be tested before the drum is ordered.
Custom mesh and granulation can carry a different minimum, because the material has to be milled or granulated as a batch. Confirm the minimum with the grade, not only with the product name.
The two catalog packs
| Pack | Net weight | Typical use | What ships with it |
|---|---|---|---|
| Foil pouch | 1 kg | Qualification, sample and small trial | Lot code and COA |
| Fiber drum | 25 kg | Production | Lot code and COA |
Both packs are closed units. The foil pouch is the moisture barrier for the small quantity; the fiber drum is the production unit. Keep the pack closed in store, and record which pack a sample came from. A sample without a lot code cannot be compared with the production drum.
Lead time
Catalog grades are quoted at 1–7 days from a released lot. The count begins at order confirmation, not at the first enquiry. A custom mesh, a granulation, a private-label pack or a document set that has to be legalised adds time, and the destination and the mode of transport add more.
Use the lead time as a planning figure until the quantity, the pack, the destination and the documents are confirmed. A split delivery or a call-off schedule should be agreed in the order, not assumed from the catalog lead time.
The six details a quotation needs
A quotation is comparable when it answers six questions. Ask for all six in the first message; a reply that gives only a calcium figure and a mass cannot be compared with another supplier's reply.
- The product and grade: 80-mesh powder, granulated, or milled to 100 mesh.
- The quantity and the pack: 1 kg pouches, 25 kg drums, or a mix of both.
- The destination and the delivery term: the country, the delivery address and the Incoterm.
- The documents: COA, TDS, SDS, specification, and the allergen, GMO and irradiation statements.
- The tests and limits: glycine by HPLC, free glycine, XRD, the arsenic limit and any tighter microbiological limit.
- The required date and the label: the date the material is needed and any private-label or lot-code format.
The quotation should name the specification it is made against. A quotation made against a different mesh, a different loss-on-drying limit or a different arsenic limit is not a lower offer; it is a different product.
Samples and retains
The 1 kg pouch is the sample unit. Ask for a sample from the production lot, with the COA and the lot code, rather than a hand-made trial lot. Test it in your own matrix: flow on the filler, dispersion in the stick, hardness on the press, and loss on drying after storage in your room.
Retain part of the sample and send another part to an outside laboratory if the identity or the contaminants matter. The sample, the COA and the retain should carry the same lot code; without that link, a passing sample says nothing about the drum that follows it.
What the order should state
Put the specification on the purchase order, not only in the enquiry. The order should name the grade, the pack, the quantity, the specification revision, the documents that ship with the lot and the destination. The COA should ship with each lot, and the lot code should be traceable from the certificate to the pack.
Agree the non-conformance route before the first delivery: who tests, which laboratory is the referee, what happens to a lot that fails, and how a replacement is handled. Commercial terms, payment and delivery are confirmed in the order; this page does not set them.
The catalog specification is published on the calcium bisglycinate product page. The certificate lines are read on the COA page, the market rules are on the compliance page, and the storage conditions are on the stability page. The minimum-order term is defined in the MOQ note, and the release process is described on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation