Loss on Drying
The mass lost when a sample is dried under a defined procedure.
Definition
Loss on drying measures the mass lost by a sample under a specified temperature, time and pressure. It captures free moisture and volatile material, and in a hydrate it can also remove water of crystallisation. The result depends entirely on the method, so a figure without the drying conditions cannot be compared.
LOD is not a direct water assay. Karl Fischer titration measures water specifically, while LOD measures everything volatile under the test conditions. For magnesium bisglycinate, report LOD and the hydrate form together, because drying a hydrate can change the material being measured.
Why it matters in a specification
- Moisture affects stability, flow and the elemental content of a hygroscopic powder.
- The drying conditions define the result, and a bare percentage is not comparable.
- It is often confused with water content, which is a narrower measurement.
What to ask a supplier
- What temperature, time and sample size does the method use?
- Was the result run on the same lot and in the same laboratory as the assay?
- Does the specification set a limit for LOD and a separate one for water?
Where it appears
- Magnesium Bisglycinate — 1:2 magnesium–glycine chelate, anhydrous basis.
If a term in your specification is ambiguous, send the document and we will name the definition we would use.
Request a specification review