Minerals & Electrolytes · Core range
Calcium Bisglycinate
C₄H₈CaN₂O₄ · CAS 136-26-5 · Calcium bisglycinate, powder
Calcium bisglycinate specified at 18.5–23.0% elemental calcium, for capsules and tablets where the chelate form and the calcium content have to be declared.
- Calcium (Ca)
- 18.5–23.0%
- Minimum order
- 1 kg
- Indicative lead time
- 1–7 days
- Standard packing
- 1 kg foil pouch25 kg fiber drum
Specification
What the certificate will report
| Calcium (Ca) | 18.5–23.0% (complexometric EDTA) |
|---|---|
| Appearance | White to off-white powder |
| Identification | IR and glycine reaction conform |
| Loss on drying | ≤5.0% |
| pH (5% suspension) | 6.0–8.0 |
| Particle size | ≥95% through 80 mesh |
| Bulk density | 0.50–0.80 g/mL |
| Heavy metals | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | APC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent |
| Chemical formula | C₄H₈CaN₂O₄ |
| CAS | 136-26-5 |
| Marker set | Calcium (18.5–23.0%, EDTA) |
| Appearance | White to off-white, free-flowing powder |
| Solubility | Sparingly soluble in water; the 5% suspension is close to neutral. |
Primary method Complexometric EDTA titration — the method behind each figure matters as much as the figure. How the COA is built →
Technical documentation
Six documents, one standard.
Quality, procurement and regulatory pages for Calcium Bisglycinate. Each card opens the full document; a sample COA and the technical data sheet are available on request.






What to confirm before ordering
- Name the chelate: calcium bisglycinate is not calcium citrate or calcium carbonate.
- Ask for the calcium assay and the glycine identity; a calcium figure alone does not prove the chelate.
- Confirm the chelate ratio and the free glycine figure if the label claims a specific chelate.
- The calcium content is lower than carbonate, so the tablet or capsule weight changes.
Buyer questions
Practical answers
What is Calcium Bisglycinate specified to?
Calcium (Ca): 18.5–23.0% (complexometric EDTA). The full specification adds Appearance, Identification, Loss on drying, pH (5% suspension), Particle size and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.
Is Calcium Bisglycinate a chelate or a blend?
The catalog grade is a 1:2 calcium–glycine chelate. Blends with the corresponding oxide or carbonate are a different material and are not supplied under this specification. The identity page explains how the distinction is tested.
Which dosage forms does this grade fit?
Capsules and tablets, Powder sticks and drink mixes, Gummies and chews. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.
Which documents are supplied with the batch?
A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.
What is the minimum order and lead time?
1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.
Documentation
Released with every lot
- Batch-specific certificate of analysis against the agreed specification
- Technical data sheet with form, CAS or species, carrier, storage and packing
- Safety data sheet in the 16-section format
- Allergen, GMO and origin statements signed for the batch
- Residual-solvent statement for the crystallisation system
- Specification comparison against the specification you sent
What this page does not claim
Calcium Bisglycinate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.
Next step
Send the spec. We will confirm the form.
A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.