02 Grade comparison

Squalene grades: source, purity and the powder format

Technical document 02 · Reviewed 2026-11-19 · Squalene

On this page
  1. Why squalene has grades at all
  2. The grades side by side
  3. Oil, powder and the handling difference
  4. Dose arithmetic across the formats
  5. What to write into the specification
  6. When another grade or another material is the right choice

Squalene is sold by source, assay and format, not as one commodity grade. The catalog material is olive-derived, ≥90% by GC, supplied as an oil in a 1 kg amber bottle or a 25 kg HDPE drum. A higher assay, a different source or a powder-on-carrier format is a different specification. Squalane is a different material, not a grade of squalene.

In one line

The grade of squalene is the source plus the assay plus the format; the catalog grade is olive-derived at ≥90% by GC, and any step away from it is a new specification.

Why squalene has grades at all

Squalene is a hydrocarbon that occurs in small amounts in olive oil and in a few seed oils, and it is concentrated from the deodoriser distillate of olive-oil refining. The source decides which minor hydrocarbons, sterols and oxidation products travel with it, and it decides the traceability story the buyer has to keep. Olive-derived material and material recovered from shark liver oil are chemically the same molecule, but they are not the same purchase.

The assay is the second axis. The catalog gate is ≥90.0% by GC, which leaves room for other hydrocarbons in the oil. A tighter assay is a different specification with a different refining history, and it should be quoted as such rather than assumed from the catalog number. The third axis is the format: an oil for a softgel or an oil blend, or a powder on a carrier for a stick pack. Squalane sits outside this scheme because hydrogenation changes the molecule.

None of these axes is a marketing label. Each one moves a line on the specification, a test on the certificate or a step in the process, and the buyer should be able to name which one is being bought.

The grades side by side

Squalene grades and the neighbouring material
GradeIdentityAssayWhat changes
Olive-derived oil (catalog)Squalene, CAS 111-02-4, olive source≥90.0% by GCThe standard specification and the two standard packs
Higher-purity olive oil (market grade)The same molecule, tighter assayAbove the catalog gate; a separate specificationRefining history, colour, odour and the specification lines
Powder on carrierSqualene on a declared carrierExpressed on the oilOil load, flow, dose arithmetic and pack
SqualaneC₃₀H₆₂, CAS 111-01-3Hydrogenated; iodine value near zeroSaturation, stability and the label name

The table shows why the four are separate purchases. The powder is not a diluted grade of the oil in the commercial sense; it is an oil carried on a matrix, and the oil load has to be declared. Squalane is not a purer squalene; it is the saturated form with its own CAS number and its own market.

Oil, powder and the handling difference

Squalene is a clear, colourless to pale yellow oil. It is lighter than water, insoluble in water and miscible with many vegetable oils and non-polar solvents. The refractive index sits in a narrow window at 1.494–1.499, and the oil stays liquid at ordinary storage temperatures. Those properties make it easy to blend into an oil phase and awkward to disperse in a water-based drink without an emulsifier.

The powder-on-carrier format is a free-flowing solid in which the oil is held on a declared carrier. It disperses in water rather than dissolving, and it brings the carrier into the formula. The oil load is the number that matters: a powder declared at 50% oil delivers half its mass as oil, so the dose arithmetic is not the same as for the neat oil.

Both formats need protection from light, heat and air. The amber bottle and the HDPE drum are barriers, not decorations; an open container on a bench is an oxidation experiment. The powder adds surface area and a carrier that can hold moisture, so its storage and its peroxide value need their own attention.

Dose arithmetic across the formats

The dose is set by the formulator and the label, not by this page. The arithmetic is simple and easy to get wrong. One gram of a 90% oil delivers about 0.9 g of squalene; one gram of that powder delivers about 0.5 g of squalene and 0.5 g of carrier. A softgel fill weight is the oil mass plus the shell; an oil blend declares the oil as a percentage of the blend.

If the label names squalene, the amount on the label should be the squalene mass, not the mass of the oil or the powder. The assay and the oil load are the two conversion factors. An overage for storage loss is a separate decision, and it belongs with the stability data rather than with the grade choice.

The grade also decides the dosage form. An oil suits a softgel or an oil blend. A powder suits a stick pack, a capsule fill or a drink mix. A formulator who swaps one for the other has changed the fill weight, the mouthfeel and the label, even when the assay is unchanged.

What to write into the specification

  • “Squalene, olive-derived, CAS 111-02-4, C₃₀H₅₀.”
  • “Assay ≥90.0% by GC; report the standard and the integration basis.”
  • “Refractive index 1.494–1.499 at 20 °C; iodine value 350–380 g I₂/100 g.”
  • “Moisture ≤0.1%; heavy metals and microbiology as listed.”
  • “Source and distillation step declared; no squalane substitution.”
  • “Pack: 1 kg amber bottle or 25 kg HDPE drum; storage condition stated.”
  • “Powder on carrier: carrier and oil load declared; assay expressed on the oil.”

When another grade or another material is the right choice

If the formula needs a saturated, oxidation-resistant oil, squalane is the material, not a higher grade of squalene. If the label names squalane, a squalene lot is not a drop-in, because the ingredient name, the CAS number and the unsaturation all change. If the formula is a clear aqueous drink, the neat oil will separate; an emulsion or a powder-on-carrier format is the practical route.

If the application needs a tighter assay than the catalog gate, ask for it as a separate specification with its own certificate. A catalog grade cannot be tightened by a note on the purchase order. The product hub carries the catalog data; the level-four comparison sets out the saturated form; the COA page shows how each grade is reported; the MCT powder page is a useful reference for carrier-based formats; the quality page describes change control.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation